Shark UV410 Manuel utilisateur

Owner’s Guide

www.sharkclean.com

UV410

UV410_26_IB_ENG_120229_5.indd 1 12-02-29 1:30 PM

TOLL FREE: 1-800-798-7398

This manual covers model numbers:

UV410 26

TECHNICAL SPECIFICATIONS

Voltage: 120V.

Watts: 1200W

Amps: 10A

Hertz: 60Hz

UV410_26_IB_ENG_120229_5.indd 2 12-02-29 1:30 PM

www.sharkclean.com

Contents

Important Safety Instructions 2

Getting Started 4

Using the Vacuum 6

Cleaning with the Vacuum Accessories 7

Emptying the Dust Cup Assembly 8

Proper Care of Your Vacuum 9

Troubleshooting 10

Checking for Blockages 11

Maintenance 12

Warranty and Registration 13

Thank you for

purchasing

the Shark®

Navigator™

Upright Vacuum.

UV410_26_IB_ENG_120229_5.indd 1 12-02-29 1:30 PM

TOLL FREE: 1-800-798-7398

WARNING:

TO REDUCE THE RISK OF ELECTRIC

SHOCK OR INJURY DO NOT USE

OUTDOORS OR ON WET SURFACES.

WHEN USING YOUR SHARK®NAVIGATOR™

UPRIGHT VACUUM, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

YOUR SHARK®NAVIGATOR™UPRIGHT

VACUUM.

POLARIZED PLUG:

This appliance has a polarized plug (one blade

is wider than the other). As a safety feature, this

plug will ﬁt into a polarized outlet only one way.

Do not force into the outlet or try to

modify the plug to ﬁt.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

GENERAL ELECTRICAL SAFETY:

1. Unplug from electrical outlet when not in use

and before servicing.

2. DO NOT use vacuum with a damaged cord or

plug.

3. DO NOT pull or carry vacuum by the cord.

4. DO NOT unplug by pulling on cord; to unplug,

grasp the plug, not the cord.

5. DO NOT handle plug or vacuum cleaner with

wet hands.

6. DO NOT run the vacuum over the power cord.

7. DO NOT close a door on the cord.

8. DO NOT pull cord around sharp corners.

9. DO NOT leave appliance when plugged in.

10. Keep power cord away from heated surfaces.

11. Turn off all controls before plugging or

unplugging vacuum cleaner.

12. Always turn off this appliance before connecting

or disconnecting the motorized nozzle.

HOSE ATTACHMENTS:

13. DO NOT use if air ﬂow is restricted; if the air

paths, the hose or the extension tube become

blocked, turn the vacuum cleaner off. Remove

all obstructions before you turn on the unit

again.

14. Keep the end of the hose, wands and other

openings away from face and body.

15. Keep rotating brush and suction openings away

from hair, face, ﬁngers, uncovered feet or loose

clothing.

16. Only use manufacturer’s recommended

attachments.

UV410_26_IB_ENG_120229_5.indd 2 12-02-29 1:30 PM

www.sharkclean.com

GENERAL USE:

17. Use only as described in this manual.

18. DO NOT put any objects into openings.

19. Keep your work area well lit.

20. Keep the vacuum moving over the carpet

surface at all times to avoid damaging the

carpet ﬁbers.

21. DO NOT place vacuum on unstable surfaces

such as chairs or tables.

22. DO NOT allow young children to operate the

vacuum or use as a toy.

23. DO NOT use vacuum cleaner if it has been

dropped, damaged, left outdoors or submerged

in water. Return to EURO-PRO Operating LLC

for examination, repair or adjustment.

CYCLONIC CHAMBER/DUST CUP/FILTERS:

24. Before turning on the vacuum:

 • Makesurethatdustcup,cyclonicchamber

and all ﬁlters are in place after routine

maintenance.

 •Makesurethatallcomponentsandﬁltersare

thoroughly dry after routine cleaning.

 • Onlyuseﬁltersandaccessoriesprovidedby

EURO-PRO Operating LLC [Failure to do so

will void the warranty].

GENERAL CLEANING:

25. DO NOT run the vacuum over large-sized

objects.

26. DO NOT pick up hard or sharp objects such as

glass, nails, screws or coins that could damage

the vacuum cleaner.

27. DO NOT pick up smoking or burning objects

such as hot coals, cigarette butts or matches.

28. DO NOT pick up ﬂammable or combustible

materials such as lighter ﬂuid, gasoline,

kerosene or use in areas where they may be

present.

29. DO NOT pick up toxic solutions such as

chlorine bleach, ammonia or drain cleaner.

30. DO NOT use in an enclosed space where

vapors are present from paint, paint thinner,

moth-prooﬁng substances, ﬂammable dust or

other explosive or toxic materials.

31. DO NOT vacuum up any liquids.

32. DO NOT immerse vacuum cleaner in water or

other liquids.

33. DO NOT use outdoors or on wet surfaces; use

only on dry surfaces.

34. Use extra care when cleaning on stairs.

SAVE THESE

INSTRUCTIONS

UV410_26_IB_ENG_120229_5.indd 3 12-02-29 1:30 PM

TOLL FREE: 1-800-798-7398

FIRST THING’S FIRST, YOU

NEED TO KNOW WHAT’S IN THE

BOX YOU JUST OPENED:

AVacuum Body

BFloor Power Nozzle

CHandle Assembly

DSuper Stretch Hose

ECleaning Wand

FPet Hair Power Brush

GCleaning Attachments

H24” Crevice Tool

I Extended Reach Kit

Note: Optional tools are available for sale

for any UV410 model: 1-800-798-7398.

Getting Started

Your Shark®Navigator™

Upright is easy to assemble:

1Lay your vacuum body on a

level surface.

2Slide the electrical connection

from the power nozzle into the

main body to click into place.

3Connect the hose from the main

body to the power nozzle; push

with a slight turning motion to

create a snug ﬁt.

4Slide the handle assembly

into the upright unit aligning

the hose hook on the handle

assembly with the power cord

hooks on the back of the unit.

5Secure the handle assembly in

place with included nut/bolt

(shipped attached to handle

assembly).

6Place the vacuum in the upright

position.

7Store the Crevice Tool, Dusting

Brush and Cleaning Wand on

the unit.

A C E

UV410_26_IB_ENG_120229_5.indd 4 12-02-29 1:30 PM

www.sharkclean.com

IMPORTANT:

For suction to reach the Floor

Power Nozzle, the Cleaning

Wand and Super Stretch Hose

must be attached securely on

the vacuum body.

10 To carry the vacuum:

With the unit in the standing

position, lift by the Dust Cup

Handle.

CAUTION: When lifting or

carrying, DO NOT press Dust

Cup Assembly release button.

8Attach the Super Stretch Hose:

a) Snap hose into swivel

connector

b) Route under anti-tip hook

c) Route over upper hose

holder

d) Press securely onto cleaning

wand

IMPORTANT:

To prevent vacuum from

tipping, secure hose under the

anti-tip hose hook.

9 To store the vacuum:

When storing your vacuum,

wind the cord around the two

cord holders and secure with

cord clip:

 •QuickCordreleaseatthe

top of the unit – place in the

upright position.

 •Cordholdernearthebase–

turn it until it is pointing down.

 Toreleasethecord,turntheQuick

Cord release to the left or right.

Store the Extended Reach Kit,

the Pet Hair Power Brush and

the 24" Crevice Tool with the

vacuum when not in use.

8 9

UV410_26_IB_ENG_120229_5.indd 5 12-02-29 1:30 PM

TOLL FREE: 1-800-798-7398

Using the Vacuum

IMPORTANT: To protect your

carpets, the brushroll will only

turn on when you have pulled

the handle back towards you and

released the Floor Power Nozzle.

Your Shark®Navigator™Upright

Vacuum can be used to clean bare

ﬂoors or carpets – with the click of

a switch.

Stand the vacuum into the upright

position.

Plug in the vacuum.

1Start with the Power Switch in

the “O"- Off position.

2Place your foot on the Floor

Power Nozzle and pull handle

towards you.

3Set the Power Switch to desired

cleaning setting.

4When cleaning carpets:

Ensure you have pulled the

handle towards you and select

the “II" - Brushroll On position

to agitate the carpet ﬁbers for

deeper cleaning performance.

When cleaning bare ﬂoors:

Select the "I"- On position for

suction only cleaning to avoid

scattering dirt while cleaning.

5Due to the huge suction

power of this vacuum, it

may become necessary to

adjust the suction release

on the hose. If the vacuum

is difﬁcult to push or pull or

if it is lifting up area rugs,

adjust the suction release by

opening or closing the valve

at the top end of the hose.

IMPORTANT:

Your Brushroll Indicator Light

will illuminate solid green when

the brushroll is on, or solid red if

there is a blockage. This feature

is designed to protect your

Lifetime Belt that powers your

brushroll. See Checking for

Blockages on page 11.

NOTE: The height of your power

nozzle has been optimized

for easy pushing and superior

cleaning on all ﬂoor types, so

there is no need to make any

height adjustments as you

transition to different ﬂoor &

carpet types.

OFF

Bare Floors /

Tools

Carpets

Power Switch Settings Suction Release

Release suction for

easier push and pull

on high pile carpets

and area rugs.

UV410_26_IB_ENG_120229_5.indd 6 12-02-29 1:30 PM

www.sharkclean.com

Cleaning with the Vacuum Accessories

Before cleaning with your

accessories:

Stand vacuum into upright position.

Secure Super

Stretch Hose in

the anti-tip hose

hook to prevent

tipping.

Select the “I" - On position for

suction only cleaning.

DO NOT pull vacuum cleaner

around by the hose.

DO NOT overextend the hose.

Vacuum Accessories

Your vacuum comes with a Super

Stretch Hose and Cleaning Wand.

Use one or the other to attach your

cleaning accessories.

1Using the Super Stretch Hose:

Stand the vacuum into upright

position.

Remove the hose from the

Cleaning Wand.

Push the selected tool into the

hose connector.

456

2Using the Cleaning Wand:

Stand the vacuum into upright

position.

Remove the Cleaning Wand

(with hose attached) from the

unit.

Push the selected tool into the

end of the Cleaning Wand.

3Pet Hair Power Brush

4Dusting Brush

5Crevice Tool

624” Crevice Tool

Extended Reach Cleaning Kit

Includes an extra Cleaning Wand and

extra Super Stretch Hose.

Increases your cleaning

reach to over 27 feet!

To order additional parts and accessories,

go to www.sharkclean.com or call

1-800-798-7398.

Extended Reach

Cleaning Kit

UV410_26_IB_ENG_120229_5.indd 7 12-02-29 1:30 PM

TOLL FREE: 1-800-798-7398

For best results empty the Dust Cup

after each use; empty several times

during prolonged usage. or when it

reaches the MAX ﬁll line.

NEVER OVER-FILL THE DUST

CUP.

Stand vacuum into upright position.

Turn vacuum off.

To empty the Dust Cup:

1Grip carry handle and press

the Dust Cup release button to

remove.

2Option A:ForQuickEmpty:

Insert Dust Cup deep inside

trash receptacle to contain dust

and debris.

Press the bottom Dust Cup

release button; tap container

gently to dislodge and release

dust and debris.

Snap door in place.

Important: If the Dust Cup

Door does not swing open after

pressing the release button,

push the door open using the

bottom door tabs.

CAUTION:

Unplug the vacuum;

failure to do so might

result in electric

shock.

3Option B: For Allergy Sufferers:

Wrap a trash bag around the

Dust Cup leaving space at the

bottom for the door to swing

open.

Locate the Dust Cup Door

release button within the trash

bag and press to release as you

shake the dust cup to empty

dust and debris.

Snap the bottom door in place.

Note: Option B can also be

performed outside of the home

to further minimize releasing

dust back into the air. Carry just

the Dust Cup and trash bag

outside.

Note: Some dust and debris

may remain in the top of your

dust cup on or near the metal

screen. It is not necessary to

completely remove this material

before continuing to vacuum;

Shark®advanced cyclonic action

will sweep the metal screen

clean once you begin to reﬁll

your dust cup.

1 2 3

Emptying the Dust Cup Assembly

UV410_26_IB_ENG_120229_5.indd 8 12-02-29 1:30 PM

Table des matières

Autres manuels Shark Aspirateur

Shark

Shark Navigator Lift-Away Zero-M Speed ZU560 Manuel utilisateur

Shark

Shark NAVIGATOR LIFT-AWAY NV392 Manuel utilisateur

Shark

Shark Rocket HV370 Series Manuel utilisateur

Shark

Shark Rotator Lift-Away Pet ZU570 Series Manuel utilisateur

Shark

Shark Rotator Powered Lift-Away ZU621 Manuel utilisateur

Shark

Shark NV830 Series Manuel utilisateur

Shark

Shark EZ ROBOT SELF-EMPTY 9000 Series Manuel utilisateur

Shark

Shark SV769*14 Manuel utilisateur

Shark

Shark IQ ROBOT Self-Empty RV1000S Series Manuel utilisateur

Shark

Shark NV105 Manuel utilisateur

Shark

Shark DuoClean HZ500UK Series Manuel utilisateur

Shark

Shark Pursuit UV209 Manuel utilisateur

Shark

Shark Rocket ZS351Q Series Manuel utilisateur

Shark

Shark Apex UpLight Lift-Away DuoClean QU603Q... Manuel utilisateur

Shark

Shark ROTATOR UV770Q Manuel utilisateur

Shark

Shark NV353Q Series Manuel utilisateur

Shark

Shark Rotator ZU100 Series Manuel utilisateur

Shark

Shark EURO-PRO EP604C Manuel utilisateur

Shark

Shark NV500 Servise Manuel utilisateur

Shark

Shark Navigator Lift-Away Pro NV358QBK Series Manuel utilisateur

Shark

Shark IZ300 Series Manuel utilisateur

Shark

Shark IONFLEX IC205 Series Manuel utilisateur

Shark

Shark Pursuit V209AF Manuel utilisateur

Shark

Shark NV300 SERIES Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur

Nobles

Nobles 608669 Manuel du produit