Shark NV44 Manuel utilisateur

NV44

www.sharkclean.com

Owner’s Guide

NV44_26_IB_E_130124_1.indd 1 13-01-24 11:35 AM

TOLL FREE: 1-800-798-7398

This manual covers model number:

NV44 26

TECHNICAL SPECIFICATIONS

Voltage: 120V.

Watts: 1200W

Amps: 10A

Hertz: 60Hz

Euro-Pro, Shark, and Navigator are trademarks of Euro-Pro

Operating LLC. All other brand names may be trademarks of their

respective owners.

NV44_26_IB_E_130124_1.indd 2 13-01-24 11:35 AM

www.sharkclean.com

Contents

Important Safety Instructions 2

Getting Started 4

Using the Vacuum 6

Cleaning with the Vacuum Accessories 7

Emptying the Dust Cup Assembly 8

Proper Care of Your Vacuum 9

Troubleshooting 10

Checking for Blockages 11

Maintenance 12

Warranty and Registration 13

Thank you for

purchasing

the Shark®

Navigator®

Plus Upright

Vacuum.

NV44_26_IB_E_130124_1.indd 1 13-01-24 11:35 AM

TOLL FREE: 1-800-798-7398

WHEN USING YOUR SHARK®NAVIGATOR®

PLUS UPRIGHT VACUUM, BASIC SAFETY

PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR SHARK®NAVIGATOR®PLUS

UPRIGHT VACUUM.

POLARIZED PLUG:

This appliance has a polarized plug (one blade

is wider than the other). As a safety feature, this

plug will ﬁt into a polarized outlet only one way.

Do not force into the outlet or try to

modify the plug to ﬁt.

GENERAL ELECTRICAL SAFETY:

1. Unplug from electrical outlet when not in use

and before servicing.

2. DO NOT use vacuum with a damaged cord or

plug.

3. DO NOT pull or carry vacuum by the cord.

4. DO NOT unplug by pulling on cord; to unplug,

grasp the plug, not the cord.

5. DO NOT handle plug or vacuum cleaner with

wet hands.

6. DO NOT run the vacuum over the power cord.

7. DO NOT close a door on the cord.

8. DO NOT pull cord around sharp corners.

9. DO NOT leave appliance when plugged in.

10. Keep power cord away from heated surfaces.

11. Turn off all controls before plugging or

unplugging vacuum cleaner.

12. Always turn off this appliance before connecting

or disconnecting the motorized nozzle.

HOSE ATTACHMENTS:

13. DO NOT use if air ﬂow is restricted; if the air

paths, the hose or the extension tube become

blocked, turn the vacuum cleaner off. Remove

all obstructions before you turn on the unit

again.

14. Keep the end of the hose, wands and other

openings away from face and body.

15. Keep rotating brush and suction openings away

from hair, face, ﬁngers, uncovered feet or loose

clothing.

16. Only use manufacturer’s recommended

attachments.

WARNING:

TO REDUCE THE RISK OF ELECTRIC

SHOCK OR INJURY DO NOT USE

OUTDOORS OR ON WET SURFACES.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

NV44_26_IB_E_130124_1.indd 2 13-01-24 11:35 AM

www.sharkclean.com

GENERAL USE:

17. Use only as described in this manual.

18. DO NOT put any objects into openings.

19. Keep your work area well lit.

20. Keep the vacuum moving over the carpet

surface at all times to avoid damaging the

carpet ﬁbers.

21. DO NOT place vacuum on unstable surfaces

such as chairs or tables.

22. DO NOT allow young children to operate the

vacuum or use as a toy.

23. DO NOT use vacuum with a damaged cord

or plug. If appliance is not working as it

should, has been dropped, damaged, left

outdoors, or dropped into water, return it to

EURO-PRO Operating LLC for examination,

repair, or adjustment

CYCLONIC CHAMBER/DUST CUP/FILTERS:

24. Before turning on the vacuum:

 • Makesurethatdustcup,cyclonicchamber

and all ﬁlters are in place after routine

maintenance.

 •Makesurethatallcomponentsandﬁltersare

thoroughly dry after routine cleaning.

 • Onlyuseﬁltersandaccessoriesprovidedby

EURO-PRO Operating LLC [Failure to do so

will void the warranty].

GENERAL CLEANING:

25. DO NOT run the vacuum over large-sized

objects.

26. DO NOT pick up hard or sharp objects such as

glass, nails, screws or coins that could damage

the vacuum cleaner.

27. DO NOT pick up smoking or burning objects

such as hot coals, cigarette butts or matches.

28. DO NOT pick up ﬂammable or combustible

materials such as lighter ﬂuid, gasoline,

kerosene or use in areas where they may be

present.

29. DO NOT pick up toxic solutions such as

chlorine bleach, ammonia or drain cleaner.

30. DO NOT use in an enclosed space where

vapors are present from paint, paint thinner,

moth-prooﬁng substances, ﬂammable dust or

other explosive or toxic materials.

31. DO NOT vacuum up any liquids.

32. DO NOT immerse vacuum cleaner in water or

other liquids.

33. DO NOT use outdoors or on wet surfaces; use

only on dry surfaces.

34. Use extra care when cleaning on stairs.

SAVE THESE

INSTRUCTIONS

NV44_26_IB_E_130124_1.indd 3 13-01-24 11:35 AM

TOLL FREE: 1-800-798-7398

Along with your upright unit, you

will ﬁnd the following components:

aVacuum Body

b MotorizedFloorBrush

cHandle Assembly

dSuper Stretch Hose

eCleaning Wand

fPower Brush

gCleaning Attachments

Getting Started

Your Shark®Navigator®Plus

Upright is easy to assemble:

1Lay your vacuum body on a

level surface.

2Slide the electrical connection

from the motorized ﬂoor brush

into the main body to click into

place.

3Connect the hose from the

main body to the motorized

ﬂoor brush; push with a slight

turning motion to create a snug

ﬁt.

4Slide the handle assembly

into the upright unit aligning

the hose hook on the handle

assembly with the power cord

hooks on the back of the unit.

5Secure the handle assembly in

place with included nut/bolt

(shipped attached to handle

assembly).

6Place the vacuum in the upright

position.

7Store the Crevice Tool, Dusting

Brush and Cleaning Wand on

the unit.

a c e*

NV44_26_IB_E_130124_1.indd 4 13-01-24 11:35 AM

www.sharkclean.com

10 To carry the vacuum:

With the unit in the standing

position, lift by the Dust Cup

Assembly Handle (carry handle).

CAUTION: When lifting or

carrying, DO NOT press Dust

Cup Assembly release button.

8Attach the Super Stretch Hose:

a) Snap hose into swivel

connector

b) Route under anti-tip hook

c) Route over upper hose

holder

d) Press securely onto cleaning

wand

IMPORTANT:

To prevent vacuum from

tipping, secure hose under the

anti-tip hose hook.

9When storing your vacuum,

wind cord around the two cord

holders and secure with cord

clip:

 •QuickCordreleaseatthe

top of the unit – place in the

upright position.

 •Secondholdernearthe

base – turn until it is pointing

down.

 Toreleasethecord,turntheQuick

Cord release to the left or right.

IMPORTANT:

For suction to reach the

MotorizedFloorBrush,the

Cleaning Wand and Super

Stretch Hose must be attached

securely on the vacuum body.

8 9

NV44_26_IB_E_130124_1.indd 5 13-01-24 11:36 AM

TOLL FREE: 1-800-798-7398

OFF

Bare Floors /

Tools

Carpets

Using the Vacuum

Your Shark®Navigator®Plus

Upright Vacuum is a versatile tool

that can be used to clean bare ﬂoor

surfaces or carpets – with the click

of a switch.

Stand the vacuum into the upright

position.

Plug in the vacuum.

1Start with the Power Switch in

the “O Off” position.

2Place your foot on the motorized

ﬂoor brush and pull handle

towards you.

3Set the Power Switch to desired

cleaning setting.

4When cleaning bare ﬂoors:

Select the “I On” position for

suction only cleaning to avoid

scattering dirt while cleaning.

When cleaning carpets:

Ensure you have pulled the

handle towards you and select

the “II Brush Roll On” position

to agitate the carpet ﬁbers for

deeper cleaning performance.

IMPORTANT:

To protect your carpets, the

Brush Roll will only turn on when

you have pulled the handle back

towards you and released the

MotorizedFloorBrush.

IMPORTANT:

Your Brush Roll Indicator Light

will illuminate solid green when

brush roll is on, or solid red if

there is a blockage. This feature

is designed to protect your

Lifetime Belt that powers your

Brush Roll. See Checking for

Blockages on page 11.

NOTE: The height of your

MotorizedFloorBrushhasbeen

optimized for easy pushing and

superior cleaning on all ﬂoor

types, so there is no need to

make any height adjustments as

you transition to different ﬂoor &

carpet types.

NV44_26_IB_E_130124_1.indd 6 13-01-24 11:36 AM

www.sharkclean.com

Cleaning with the Vacuum Accessories

Before cleaning with your

accessories:

Stand vacuum into upright position.

Secure Super

Stretch Hose in

the anti-tip hose

hook to prevent

tipping.

Select the “I On” position for

suction only cleaning.

DO NOT pull vacuum cleaner

around by the hose.

DO NOT overextend the hose.

Vacuum Accessories

Your vacuum comes with a Super

Stretch Hose and Cleaning Wand.

Use one or the other to attach your

cleaning accessories.

1Using the Super Stretch Hose:

Stand the vacuum into upright

position.

Remove the hose from the

Cleaning Wand.

Push the selected tool into the

hose connector.

2Using the Cleaning Wand:

Stand the vacuum into upright

position.

Remove the Cleaning Wand

(with hose attached) from the

unit.

Push the selected tool into the

end of the Cleaning Wand.

3Power Brush

4Dusting Brush

5Crevice Tool

To order additional parts and accessories,

go to www.sharkclean.com or call

1-800-798-7398.

NV44_26_IB_E_130124_1.indd 7 13-01-24 11:36 AM

TOLL FREE: 1-800-798-7398

Emptying the Dust Cup Assembly

For best results empty the Dust Cup

Assembly after each use; empty

several times during prolonged

usage.

Or empty the Dust Cup Assembly

when it reaches the MAX ﬁll line;

NEVER OVER-FILL THE DUST

CUP.

Stand vacuum into upright position.

Turn vacuum off.

For proper care, consult the table

to the right for the maintenance

schedule of your Cyclonic Chamber

and Filters.

Lock vacuum into upright position.

Turn vacuum off.

Remove Dust Cup Assembly.

To empty the Dust Cup Assembly:

1Grip carry handle and press

the Dust Cup release button to

remove Dust Cup Assembly

2Option A:forQuickEmpty:

Insert Dust Cup Assembly deep

inside trash receptacle to contain

dust and debris.

Press the Dust Cup Door release

button; tap container gently to

dislodge and release dust and

debris.

Snap door in place.

Important: If the Dust Cup

Door does not swing open after

pressing the release button,

push the door open using the

bottom door tabs.

CAUTION:

Unplug the vacuum;

failure to do so might

result in electric

shock.

3Option B: For Allergy Sufferers:

Wrap a trash bag around the

Dust Cup Assembly leaving

space at the bottom for the door

to swing open.

Locate the Dust Cup Door

release button within the trash

bag and press to release as you

shake the dust cup to empty

dust and debris.

Snap the bottom door in place.

Note: Option B can also be

performed outside of the home

to further minimize releasing

dust back into the air. Carry just

the Dust Cup Assembly and trash

bag outside.

Note: Some dust and debris

may remain in the top of your

dust cup assembly on or near

the metal screen. It is not

necessary to completely remove

this material before continuing

to vacuum; Shark®advanced

cyclonic action will sweep the

metal screen clean once you

begin to reﬁll your dust cup.

1 2 3

NV44_26_IB_E_130124_1.indd 8 13-01-24 11:36 AM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Shark Aspirateur

Shark

Shark NV340 Series Manuel utilisateur

Shark

Shark IQRobot Self-Empty XL AV1002AE Series Manuel utilisateur

Shark

Shark Rocket HV380EU2 Manuel utilisateur

Shark

Shark ROCKET PowerFins UZ360 Series Manuel utilisateur

Shark

Shark Shark ION RV700_N series Manuel utilisateur

Shark

Shark Navigator DLX Manuel utilisateur

Shark

Shark CORDLESS PRO IZ500 Series Manuel utilisateur

Shark

Shark Rocket DuoClean Manuel utilisateur

Shark

Shark IQ ROBOT SALE-EMPTY XL Manuel utilisateur

Shark

Shark NV350UKC Manuel utilisateur

Shark

Shark UV700 Manuel utilisateur

Shark

Shark LIFT-AWAY SPEED NV770 Manuel utilisateur

Shark

Shark UV490CCO Manuel utilisateur

Shark

Shark Navigator Lift-Away Zero-M Speed R-ZU560 Manuel utilisateur

Shark

Shark DUOCLEAN HZ400UKT Manuel utilisateur

Shark

Shark NINJA STRATOS IZ400UK Series Manuel utilisateur

Shark

Shark Navigator LIFT-AWAY ZERO-M ZU571 Series Manuel utilisateur

Shark

Shark HYDROVAC WD100 Series Manuel utilisateur

Shark

Shark Rotator Lift-Away ADV LA500 Series Manuel utilisateur

Shark

Shark CV100 Series Manuel utilisateur

Shark

Shark HV300BR Manuel utilisateur

Shark

Shark NV22 Manuel utilisateur

Shark

Shark NV300NZ Manuel utilisateur

Shark

Shark Rocket HV343AMZ Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur

Nobles

Nobles 608669 Manuel du produit