Shadowspec SS-1 Manuel utilisateur
SS-1 Smart Controller
www.shadowspec.com/smart-baery
Funcon Buon/ Baery Status Light
Locking Hooks for mounng
LED Light / Charger Socket
Dual Funcon
Version - 003
What’s in the box?
SS-1 Smart ControllerSS-1 Smart Controller
Shadowspec Charger AdapterShadowspec Charger Adapter
AC Power LeadAC Power Lead
AU / EU / US AvailableAU / EU / US Available
Install Your Smart Controller
Operate your Light
The Shadowspec App
Important Things to Remember
Step 1: Slide the SS-1 Smart Controller inStep 1: Slide the SS-1 Smart Controller in Step 2: Plug the LED light into the SS-1Step 2: Plug the LED light into the SS-1
1. Slide the SS-1 onto the Main Spar of your umbrella at the LED light End
2. Plug the LED light Cable into SS-1
3.
Shadowspec app on your smart device to control the SS-1 Smart Controller.
the Shadowspec App on your smartphone.
Buon funcon:
Push once Light on - 100% full power (brightness).
Push again Light on - 50% full power (brightness).
Push again Light (stand-by mode to accept Bluetooth commands).
Baery status light funcon:
Red Light on Unit Charging
Green Light on Unit Charged
Baery requires charging
Download the Shadowspec App to
your smart device to get full control
over your SS-1 Smart Controller. Visit
our website for links or search for
Shadowspec on Google Play or the
App Store.
1. Only use the supplied Shadowspec Charger Adaptor to charge the
2.
3.
4.
5.
Shadowspec LED-Light
(Unity and Serenity Models)
Input Voltage: 9V DC
Power Consupon: 900mA
Socket Polarity:
Shadowspec Charger
Input Voltage: 100V-240V AC
Output Voltage: 24V @ 1000mA
Plug Polarity:
Tip: the default password for the
controller is 12345678
www.shadowspec.com/smart-baery
SS-1 Controller Care
FCC Statement
The LED Light won’t come
on:
Charge your baery using the provided Shadowspec Charger.
Please note that the SS-1 will shut down if the baery
discharges below a minimum threshold; this protects the
baery from permanent damage. Please charge the baery.
The Baery is charged but
Light is no longer working:
1. Check the baery plug is aached to the SS-1 Baery.
2. Hold the buon for 10 seconds to reset the SS-1 Baery.
Mobile Applicaon won’t
detect the device:
Unit is fully discharged and not in Stand-by mode.
• Please remember to charge your SS-1 Smart Controller before it is used.
•
•
•
• Do not dispose o the SS-1 Controller via normal trash disposal. Please recycle responsibly.
(1) This device may not cause harmful interference.
user’s authority to operate the equipment.
NOTE:
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiaon Exposure Statement
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Autres manuels Shadowspec Contrôleurs
