Safety Instructions
4
Safety Instructions
Read these instructions before using.
WARNING
Potential re risk if the heater is covered by any ammable materials.
• CAUTION — Some parts of the heater can become very hot and cause burns.
Do NOT touch the appliance during operation to avoid the risk of injury.
• Check that the voltage indicated on the nameplate of the appliance corresponds to
the local mains voltage before the appliance is hardwired.
• The power supply to the appliance should correspond to the relevant regulations of
the power supply companies and the regional construction regulations.
• To avoid overheating do NOT cover the heater.
• The heater must NOT be located immediately below a socket outlet.
• The heater must be installed at least 3m or 3.5m (6kW Vertical ONLY)above
the oor.
• After xing to a wall or ceiling, adjustments to the direction of radiation must only
be made with the appropriate tools.
• It can become a re risk if the heater is covered or positioned incorrectly.
• It’s dangerous to install the heater close to combustible materials.
• Do NOT use in unventilated areas.
• Do NOT use where gas, petrol, paint or other ammable materials are stored.
• Do NOT push any items through, obstruct or cover the grills of the heater head.
• Do NOT move the heater when it is connected to the power supply.
• Always wait till the heater has cooled down completely before putting into storage.
• The heater must be placed with a clearance of 200cm to the wall and 25cm to
the ceiling.
• Improper use of the appliance can result in electric shock or re hazard.
• In case of damage, the heater must only be repaired by a professional electrician.
