SGM TLD-612A Manuel utilisateur
TLD-612A
Artnet Pixel Driver
2
TLD-612A dimensions
3
TLD-612A
USER MANUAL REV. 2
© 2014 SGMTM,QIRUPDWLRQ VXEMHFW WR FKDQJH ZLWKRXW QRWLFH SGM DQG DOO DI¿OLDWHG FRP-
panies disclaim liability for any injury, damage, direct or indirect loss, consequential or
economic loss or any other loss occasioned by the use of, inability to use or reliance on
the information contained in this manual. The SGM logo, the SGM name and all other
trademarNs in this document pertaining to serYices or products by SGM or its af¿liates and
subsidiaries are trademarNs oZned or licensed by SGM or its af¿liates or subsidiaries.
English edition
4
5
Contents
Safety information.................................................................................................... 6
Overview.................................................................................................................. 8
Cabling and connections ......................................................................................... 9
Rigging the TLD-612A ............................................................................................11
Connecting AC power............................................................................................ 13
Connecting LED pixels .......................................................................................... 15
Con¿guring the device using an Android telephone via R),D ............................... 16
Service................................................................................................................... 17
Speci¿cations ........................................................................................................ 18
6
Safety information
The TLD-612A is intended for professional use only. It is not suitable for household use.
Review the following safety precautions carefully before installing or operating the device.
Preventing electric shock
• Do not open the device; there are no user-serviceable parts inside.
• Ensure that power is cut off when wiring the device to the AC mains supply.
• Ensure that the device is electrically connected to earth (ground).
• Do not apply power if the device is in any way damaged.
• Do not immerse the ¿xture in water or liquid.
• Use only a source of AC power that complies with local building and electrical codes and has both overload and
earth leakage protection.
• 1ever attempt to bypass the fuse. Always have defective fuses replaced with ones of the speci¿ed type and rating.
• Verify that the power feed cable is rated for the total current draw of all daisy-chained products.
DANGER! Risk of electric shock. Do not open the device.
WARNING! Read the safety precautions in this section before
installing, powering or operating this product.
7
• Install only in a well-ventilated space.
• Do not paint, cover, or modify the device.
• Take precautions to prevent injury due to falls when working at height.
• Ensure that the device is always securely fastened with suitable hardware.
• )or elevated installations, always comply with relevant load dimensioning and safety standards and
requirements.
WARNING! Take measures to prevent personal injury.
8
Overview
The TLD-612A is an Artnet pixel driver that can be used to drive six SGM LT-100s, six SGM LT-200 or six strings of SGM
LED Ball pixel luminaries (each string can contain up to 56 led balls), or any combination of the three product types. Up
to ¿ve TLD-612As can be con¿gured and controlled when daisy-chained together and connected to a computer using
an Ethernet cable, and up to ¿ve TLD-612A¶s per port can be daisy-chained when one or more Ethernet switches are
used. TLD-612As can be con¿gured using the SGM Artnet Con¿gurator (available from httpwww.sgmlight.com) and
controlled using a lighting controller or computer-based Artnet controller.
Unpack the device and inspect it to ensure that it has not been damaged in transport. The ¿xture is I3-65 rated. This
means that it is protected from ingress of dust and lower pressure jets of water from any direction.
A. Mounting bracket left
B. Mounting bracket right
C. Cabinet
D. Connections
E. LED pixel outputs from 1 to 6 rows
(Illustrated by LED Balls)
9
Cabling and connections
10
The following connectors are used on the TLD-612A
• I367-rated R-45 Ethernet connectors, for artnet input and output.
• 3 lead power cable for power input and output with CEE cord caps.
• 6 x R-765 output connectors supply 12V DC power and data to the LED products.
Table des matières
Autres manuels SGM Contrôleurs
