SFF time N-ATX V2 Manuel utilisateur

SFF time N-ATX V2 manual

Dear customer,

Thank you for purchasing SFF time N-ATX V2 case. Please read the full compatibility list before assembling your PC. You can find the list on

our website at sfftime.com.

If you have any doubts about choosing your components, or steps in this manual, please contact us via email on [email protected], and we will

be glad to assist you.

Important notes:

- always use the correct screwdriver tip for corresponding bolts (PH1 or PH2)

- always use the correct bolt type

- do not overtight the bolts

- do not force the components in, each component should be installed without using excessive force

SFF time N-ATX V2 manual

SFF time N-ATX V2 specifications:

15 L volume with 405.5 x 367 x 101 mm outer dimensions

Console/"pizza box" style case with CPU and GPU fans in the same orientation

ATX power supply up to 180 mm

Vertically mounted GPU with multiple riser cable options

Support for following motherboard sizes: mini-ITX, mini-DTX, micro-ATX, ATX

Support for 380mm long triple slot graphic card, or 4 slot if using ITX sized motherboard

Support for 360mm radiators

CPU coolers up to 79 mm in height

Support for a 3.5" drive and up to eleven 2.5" drives

Back of motherboard accessible for cooler installation

Front USB-C gen3.2 port

Sturdy powder-coated aluminum construction

Narrow footprint - 120 mm wide with included stand

Inverted layout option

1.95 kg weight

SFF time N-ATX V2 manual

1. Case assembly (part 1)

- your case will come with

separated chassis panels and

you will need to assemble them

before installing your parts in it

- start by attaching the rear

panel to the top panel with two

5mm countersunk bolts

- beware of parts orientation

- be careful not to over torque

the bolts as you are screwing

into aluminum

SFF time N-ATX V2 manual

2. Case assembly (part 2)

- continue by attaching the MBO tray

to the rear and top panel

- use two 5mm countersunk bolts for

top panel, and 4mm countersunk

bolt for the rear panel (silver finish)

SFF time N-ATX V2 manual

3. Case assembly (part 3)

- now attach the bottom panel to the

MBO tray and to the rear panel with

five 5mm countersunk bolts

SFF time N-ATX V2 manual

4. Case assembly (part 4)

- next step is to attach the front

panel to top and bottom panels

with four 5mm countersunk bolts

SFF time N-ATX V2 manual

5. Case assembly (part 5)

- before attaching the mask, you first need

to install the USB-C cable

- use two 5mm countersunk bolts to secure

it to the front panel

-if you want to install more than two

2.5” drives you need to do it now,

before attaching the mask. Please see

step 26 for further instructions

SFF time N-ATX V2 manual

6. Case assembly (part 6)

- now you can attach the mask to the front panel

using four M3 flanged nuts with provided hex tool

SFF time N-ATX V2 manual

7. Installing the motherboard – preparing standoffs (part 1)

- to install standoffs, you

need a standoff and a

bolt that holds it

- screw the standoff to

the bolt with your hands

- to tighten the standoff,

use screwdriver and

provided hex tool, as

shown in the picture

SFF time N-ATX V2 manual

8. Installing the motherboard – preparing standoffs (part 2)

- following pictures show standoff

configurations for different motherboard sizes

- always install correct standoffs, otherwise you

could damage the motherboard

Manuels Accessoires informatiques populaires d'autres marques

Motorola

Motorola ATRIX Manuel utilisateur

HP USB Media Docking Station Manuel utilisateur

Cherry

Cherry B.UNLIMITED 3.0 Manuel utilisateur

Logitech

Logitech IO2 Manuel utilisateur

ARM

ARM DSTREAM-ST Manuel utilisateur

Bartec

Bartec TC 7 Series Manuel utilisateur

Philips

Philips SPC3540 Manuel utilisateur

Logitech

Logitech mk220 Manuel utilisateur

SilverStone

SilverStone LC02 Manuel utilisateur

Flexispot

Flexispot ML2B Manuel utilisateur

Hamlet

Hamlet UNIVERSAL COVER 101 KBT2 Manuel utilisateur

Adam Equipment

Adam Equipment RS-485 Manuel utilisateur

Vivo

Vivo MOUNT-KB05-4DW Manuel utilisateur

Kvaser

Kvaser Memorator Professional Manuel utilisateur

DRC

DRC D-Imaging Manuel utilisateur

Sven

Sven Base 305 сombo Manuel utilisateur

Hama

Hama 108310 Manuel utilisateur

SpeechWare

SpeechWare FlexyMike FMK03 Manuel utilisateur