Seyeon FW3170 Instructions d'utilisation et de sécurité

FW-3170 User’s Manual Part 1

4041-00 1 Seyeon Tech Co., Ltd

FW-3170 User’s Manual

Part 1

(Product Overview)

Version 4.0

2009-3-19

Seyeon Tech Co., Ltd

www.seyeon.co.kr

www.flexwatch.com

FW-3170 User’s Manual Part 1

4041-00 2 Seyeon Tech Co., Ltd

Contents

1. Product Overview ........................................................................................................................4

1.1. FW-3170..............................................................................................................................4

1.2. Key Functions of FW-3170 ..................................................................................................4

1.3. Technical Specification of FW-315......................................................................................5

1.4. FW-3170 Packing List..........................................................................................................7

2. Hardware Description..................................................................................................................8

2.1.FW-3170 Front Panel View..................................................................................................8

2.2. FW-3170 Rear Panel View ..................................................................................................9

3. FW-3170 H/W installation and basic setup .................................................................................9

3.1. Before installation,................................................................................................................9

3.2. Factory Default Condition...................................................................................................10

3.3. FW-3170 H/W Installation..................................................................................................10

FW-3170 User’s Manual Part 1

4041-00 3 Seyeon Tech Co., Ltd

Notice

•The materials in this document are for information use only and are subject to change without notice. While

reasonable efforts have been made in the preparation of this document, to assure its accuracy, Seyeon Tech.

assumes no liability resulting from errors or omissions in this document; or from the use of the information

contained herein.

•Seyeon Tech. reserves the rights to make changes in the product design without reservation and without

notification to its users.

reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording or otherwise, without the prior written consent of Seyeon Tech Co., Ltd.

810-12 Yeok Sam-dong, Kang Nam-gu, SEOUL, 135-081, KOREA

TEL:82230170855 / FAX : 82 2 3017 0843

URL:http://www.flexwatch.com

Warning

To prevent risk of electric shock, do not remove the system-case. Any repair or modifications for the product

will be allowed by qualified service personals only. Do not expose this appliance to water or moisture. Do not

install this product in hazardous areas where highly combustible or explosive products are stored or used.

Important Information

•Beforeinstallation,pleasereadandobserveallinstructionsandwarningscontainedinthismanual.Retain

this manual with the original receipt for future reference and warranty.

•Ifanyitemsaremissingfromthepackagewhenyouopenthebox,PleaseDONOTinstallorOPERATE

the FlexWATCH® server. Contact the local Dealer or Distributor.

•Pleaserecordthefollowinginformation for technical support and the track record in case of any theft or

loss. Serial Number can be found on the underside of FlexWATCH® server.

Warranty

•2 year Limited.

•Product : Network Video Server

•Model Name : FW-3170

•Serial Number : _00-30-6F---_

•Purchase Date : __________________ (yy/mm/dd)

FW-3170 User’s Manual Part 1

4041-00 4 Seyeon Tech Co., Ltd

1. Product Overview

1.1. FW-3170

FW-3170 server is 1ch Network Video Server, which transmits digital images captured by Analog CCD

camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere

using the standard web browser such as MS Internet Explorer or Netscape Communicator. There is no need

other specific software to view real-time live images over the Internet. FW-3170 server is state-of-the art

device and leads new generation of monitoring and security solution.

Picture 1 : FW-3170

1.2. Key Functions of FW-3170

1. Standalone device built-in web server

2. Max 30 fps transmission speed on TCP/IP network

1. 10M/100M Auto Sensing Ethernet

2. Effective Bandwidth & Bit-rate Control by H.264

3. Built-in 2 way Audio transmission (1ch A-in, 1 A-out)

4. Supports Dynamic IP users by www.ipcctvdns.com and www.aoip.co.kr server

5. Supports Sensor Input, Digital Output

6. Supports Transparent mode

7. Encryption function by user authentication

8. Image transmission function via FTP, Email

9. Supports Various PTZ (Pan/Tilt/Zoom) Devices

10. 1CH V-out for displaying on analog monitor

FW-3170 User’s Manual Part 1

4041-00 5 Seyeon Tech Co., Ltd

1.3. Technical Specification of FW-315

Model Name FW-3170

Hardware

32bit Embedded CPU

Flash 8Mbytes /SDRAM: 128Mbytes

Linux version 2.6.14 operating system

Battery backed up real-time clock

Video

compression Motion JPEG

H.264

Resolution NTSC: 704x480,352x240,176x112

PAL: 704x576,352x288,176x144

Frame rate

(each channel)

Motion JPEG: Up to

30/25 fps at D1 (Secondary Stream at QCIF)

H.264: Up to

30/25 fps at D1 (Secondary Stream at QCIF)

Video Streaming Motion JPEG and H.264 Dual Streaming (Simultaneously)

Controllable frame rate and bandwidth

Image setting Compression levels: 6 (Motion JPEG) / 6 (H.264)

Color: color, black & white

Audio 8 bit PCM(G.711-u-low), Sampling rates 8KHz, Mono Audio

1ch in & 1ch out

LAN interface 10/100BaseT Ethernet auto sensing

Alarm I/O Interface 1 Photo-coupled inputs and 1 Relay output

Video Input 1 Channel Composite Video Input

Video Output 1 loop through analog video outputs

Serial Interface

Two serial ports for console, modem(PSTN & GSM), serial input/output

device, PTZ

COM Port is RS-232,

AUX port can be configured as RS-485

Max Baudrate: 115200 bit/s

Security features Multi user level protection for camera access,

PTZ,AlarmI/O

Advanced Service

Up to 15.5M memory for Pre/Post alarm buffer

e-mail, FTP, alarm Buffer byevent or schedule

IP notification, Alarm Notification to e-mail,

CGI Call by event or schedule

Built-in Motion detections Accuracy: 12x12=144 blocks

Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive

PTZ & UART Control

Support

PTZ and UART device control through serial interface Up to 35 PTZ

protocols from Pelco “P”& “D”protocol,ViconV1311RB,

Samsung, Honeywell and Etc., X10 device control

Dial in/out via PSTN or GSM modem

Others Transmit Serial input data transfer with Video

IP notification by e-mail

Management Configurable by serial, web or telnet

Remote system update via telnet, FTP OR web browser.

Developer support Provides HTTP CGI API

ActiveX control development kit

PWR Supply SMPS input: 100~240VAC, 300mA

Output: DC 12 Volt, 800mA

FW-3170 User’s Manual Part 1

4041-00 6 Seyeon Tech Co., Ltd

PWR Consumption DC 12Volt 500 mA

Operating Environment Temperature: 32°~122°F (0°~50°C)

Humidity: 20 ~ 80% RH(non-condensing)

Accessories

Console cable for system set up

Test LAN cable

CD for User Guide, Installation wizard

Quick Installation guide

Miscellaneous

Freely downloadable NDVR Software

AVI conversion tool support by FW-voyager.

Work with FW-Manager( NDVR S/W)

Dynamic IP support through AOIP

Users 16 simultaneous users

Installation, management

and maintenance

Installation CD and web-based configuration

Firmware upgrades over HTTP or FTP , firmware available at

www.flexwatch.com

Video access from Web

browser Video access from Web browser

Minimum Web browsing

requirements

Pentium III CPU 500 MHz or higher

Windows XP, 2000, NT4.0*,

Internet Explorer 6.x or later

System integration support

Powerful API for software integration available at

http://www.flexwatch.com, including Simple Viewer API, FlexWATCH

Control SDK, event trigger data in video stream, embedded scripting

and access to serial port peripherals over HTTP/TCP

User can be installed user program daemon for event notification or

sending image.

Embedded operating system: Linux 2.6

Supported protocols HTTP, TCP/IP, FTP, Telnet, RARP, PPP, PAP, CHAP, DHCP, SMTP

client(e- mail), NTP, Java, RTP/RTSP, UPnP

Applications FlexWATCH Manager 16/32/128/256 (not included)

Approvals FCC : Class A

CE : Class A

RoHS

Dimensions (HxWxD) and

weight

Size :110 mm(L) x 84 mm(W)X 35 mm(H)

4.3 ”(L) x 3.3 ”(W)X 1.37”(H)

Weight : 310 g (0.47 lbs) without power supply.

Table 1 : FW-3170 Specification

FW-3170 User’s Manual Part 1

4041-00 7 Seyeon Tech Co., Ltd

1.4. FW-3170 Packing List

FW-3170’s packing box includes the following items.

FW-3170 1ea

Power Supply Unit

(Power Cable & SMPS DC12V 0.8A Adapter) 1ea

Direct Cable 1ea

CD (User’s Manual, Installation wizard, Picture, etc) 1ea

Table 2 : FW-3170 Packing List

FPlease check all the listed items are included in your package. For any missing items, please contact

your local distributor.

FW-3170 User’s Manual Part 1

4041-00 8 Seyeon Tech Co., Ltd

2. Hardware Description

2.1. FW-3170 Front Panel View

Picture 2 : FW-3170 Front Panel

A B C D E F G

Name Description

A Power Power input ports for DC 12V 0.8A [SMPS].

Ensure to use the original power supply unit from the package.

B Grounding Connector

Grounding Connector

C Factory Default

Button

This button can reset the factory default settings at the system.

Especially when a user lost his/her admin-password, or when it got any

uncertain faulty operation.

- After reboot the system, wait until hearing two times of beep sound.

- Keep pressing FD button for 5~10 seconds until hearing three times

short beep sound. ACT LED blinks during the process. The system will

reboot automatically when it’s completed.

D LAN LAN Port for 10/100M Base T Auto sensing.

E COM RS-232 ports for Serial input device, Modem or

Console (HyperTerminal connection).

F POWER LED

(RED/GREEN) RED light – It blinks RED when power on.

GREEN light – It blinks GREEN when IP setup is done.

G LAN(Tx/Rx) LED

(RED/GREEN)

RED light – It blinks RED when data is being transmitted on the

connected LAN port

GREEN light – It blinks GREEN only when LAN port is connected

without data transmission.

Table 3 : FW-3170 Front Panel Description

FW-3170 User’s Manual Part 1

4041-00 9 Seyeon Tech Co., Ltd

2.2. FW-3170 Rear Panel View

Picture 3 : FW-3150 Rear Panel View

A B C D E F

Name Description

A Video In BNC cable port for 1ch Video input.

B Video Out 1ch Video Output port displaying on Analog Monitor.

C MIC, SPK 1ch Audio Output and Input

D RS485 RS-485 Ports for PTZ

E DI (SENSOR) Signal input ports for sensor and contact.

F DO (ALARM) Signal output ports for alarm and light.

Table 4 : FW-3170 Rear Panel Description

3. FW-3170 H/W installation and basic setup

3.1. Before installation,

1. Read carefully User’s Manual

2. Check-out if the power source is stable or not at the environment.

FW-3170 User’s Manual Part 1

4041-00 10 Seyeon Tech Co., Ltd

3.2. Factory Default Condition

The following table shows the factory default condition. Please refer to this when you need to change

the values on admin menu.

Factory Default Condition

Admin ID root

Admin password root

IP address 10.20.30.40

Network mask 255.255.255.0

Gateway 10.20.30.1

Table 5 : Factory Default Condition

FFactory default Admin ID and Password are all lower case letters. You can change the password

with Capital letters.

3.3. FW-3170 H/W Installation

Following steps show the physical installation process for FW-3170.

1. Install CCTV cameras at each required position.

2. Connect BNC cable between CCTV camera’s V-out and FW-3170’s V-in.

3. Connect a LAN cable at FW-3170 in your local network.

4. Connect the power cable at FW-3170.

After that, you need to follow the steps below.

5. First, Network Configuration by FW-installer.

6. Second, Camera Configuration by FW-installer or admin-menu.

7. Third, Service Configuration by FW-installer or admin-menu.

FFor IP setup, refer to “Chapter 2.Network Configuration” on User’s Manual Part2.

Table des matières

Autres manuels Seyeon Serveur

Seyeon

Seyeon FW3150 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur