Sewha SI 410 Manuel utilisateur

Digital Weighing Indicator

SI 410

User Manual

Ver 2.0 2017.04.05

- 2 -

Contents

1. BEFORE INSTALLATION .................................................................................................................... - 3 -

2. INTRODUCTION ................................................................................................................................. - 4 -

2-1. Introduction..........................................................................................................................................................- 4 -

2-2. Cautions .................................................................................................................................................................- 4 -

2-3. Features..................................................................................................................................................................- 4 -

3. SPECIFICATION................................................................................................................................... - 5 -

3-1. Specification.........................................................................................................................................................- 5 -

3-2. Option.....................................................................................................................................................................- 6 -

3-3. Front Panel ........................................................................................................................................................... - 6 -

4. Installation ........................................................................................................................................ - 11 -

4-1. External Dimension & Cutting Size.........................................................................................................- 11 -

4-2. Installation Components ..............................................................................................................................- 11 -

4-3. Load cell Installation ......................................................................................................................................- 12 -

5. Set-Up................................................................................................................................................ - 13 -

5-1. Set-up mode......................................................................................................................................................- 13 -

5-2. Test Weight Calibration Mode (Using test weight).........................................................................- 15 -

5-3. Simulation Calibration Mode (Calibrate without Test weight)...................................................- 20 -

5-4. F-FUNCTION Setting......................................................................................................................................- 24 -

5-5. Set Point value input .....................................................................................................................................- 42 -

5-6. Test Mode...........................................................................................................................................................- 43 -

6. INTERFACE ........................................................................................................................................- 48 -

6-1. Serial Interface ..................................................................................................................................................- 48 -

6-2. External input ....................................................................................................................................................- 63 -

6-3. Relay output ......................................................................................................................................................- 63 -

6-4. Current loop.......................................................................................................................................................- 64 -

6-5. Analogue I-Output Interface : 4~20mA................................................................................................- 65 -

6-6 Analog V-Output Interface : 0~10V ........................................................................................................- 66 -

6-7. Analog output selection...............................................................................................................................- 67 -

6-8. Print Interface....................................................................................................................................................- 67 -

6-9. BIN IN card (Changing Product number) ............................................................................................- 68 -

6-10. BCD OUT Card (Weight data out) ........................................................................................................- 69 -

6-11. Ethernet card...................................................................................................................................................- 70 -

6-12. SD Option Card .............................................................................................................................................- 70 -

6-13. Option card combination..........................................................................................................................- 71 -

7. Error & Treatment ........................................................................................................................... - 72 -

7-1. Load Cell Installation .....................................................................................................................................- 72 -

7-2. Calibration Process .........................................................................................................................................- 73 -

7-3. Digital Weighing Indicator ..........................................................................................................................- 74 -

- 3 -

1. BEFORE INSTALLATION

Caution / Warning Marks

This mark warns the possibility to arrive death or serious injury

in case of wrongly used.

This mark cautions the possibility to arrive serious human body

injury or product lose in case of wrongly used.

Copy Rights

1. All Right and Authority for this Manual is belonged to SEWHA CNM CO., LTD.

2. Any kinds of copy or distribution without permission of SEWHA CNM CO., LTD. will be

prohibited.

3. This manual may be changed as the version is upgraded, without previous notice.

Inquiries

If you have any kinds of inquiries for this model, please contact your local agent or Head Office.

1. Head Office : SEWHACNM CO., LTD.

2. Website : http://www.sewhacnm.co.kr

3. Email : sales@sewhacnm.co.kr

4. TEL : +82-32-624-0060

- 4 -

2. INTRODUCTION

2-1. Introduction

Thank you for your choice of this SI 410 Industrial Digital Weighing Indicator.

This SI 410 model is high-performance weighing Indicator.

Please review and learn this instruction Manual and enjoy your process efficiency

with “SI 410”Weighing Indicator.

2-2. Cautions

1. Don’t drop on the ground and avoid serious external damage on item.

2. Don’t install under sunshine or heavy vibrated condition.

3. Don’t install place where high voltage or heavy electric noise condition.

4. When you connect with other devices, please turn off the power of item.

5. Avoid from water damage.

6. For the improvement of function or performance, we can change item specification without

previous notice or permission.

7. Item’s performance will be up-dated continuously base on previous version’s performance.

2-3. Features

1. SI 410 model is standard size indicator which is easy to install on the panel.

2. Front panel is covered with Polycarbonate film, strong against dust and water.

3. RS232 Serial interface is standard installed.

4. User can choose various options; Analog output 4~20mA, 0~10V / RS232C / RS422,

RS485 / ETHERNET CARD / BCD OUT / BIN IN / SD Memory card

- 5 -

3. SPECIFICATION

3-1. Specification

Content

Specification

Analog Part

Display Resolution

1/20,000

Internal Resolution

1/2,000,000 (±1,000,000)

Input Sensitivity

Min 0.1µV/V

Max Signal Input Voltage

Max 3.0mV/V

Load cell Excitation

DC +5V

A/D Conversion Method

Sigma-Delta

Decimal Point

0, 0.0, 0.00, 0.000

Drift

Offset

10PPM/℃

Span

10PPM/℃

Non Linearity

0.001% of Full Scale

Analogue Sampling(sec)

60times / sec(MAX)

Environment

Operating Temperature

Range

-10℃ ~ +40℃ [14℉ ~ 104℉]

Operation Humidity Range

40% ~ 85% RH, Non-condensing

Function

Calibration Mode

Test Weight Calibration Mode

Simulation Calibration Mode

Display

6 digit, 25.4mm(1inch) Red FND for Numbers

7 digit, Red LED for Weight unit

8 digit, Green LED for State alarm

12 digit Greed LED for Arrow

Key Pad

14pcs Standard Key pad

Additional Digital Input

6pcs external input key

Communi-

cation

Serial Port 1

(RS-232)

Data Transference

Command Mode

Serial Printer Mode

Modbus (RTU)

Relay Output

7pcs selectable relay output

Power

AC : 110~240V, Maximum Power Consumption 19W

Size

200mm(W)ⅹ100mm(H)ⅹ126.5mm(D)

Weight : 1250g

- 6 -

3-2. Option

Option1

Serial Port (RS-422)

Option2

Serial Port (RS-485)

Option 3

Serial Port (RS-232)

Option 4

ETHERNET CARD

Option 5

Analog Output(0~20mA)

Option 6

Analog Output(0~10V)

Option 7

BCD OUT

Option 8

BIN IN

Option 9

SD Memory card

3-3. Front Panel

3-3-1. Front Panel (Display / Key Pad)

- 7 -

3-3-2. State LED

LED

State

STEADY

When the weight is stable, ON.

ZERO

When the current weight is near zero, ON.

TARE

When the “TARE”function is set, ON.

HOLD

When the “HOLD”function is set, ON.

TxD

When indicator sends date out through serial communication.

RxD

When indicator receives date out through serial communication.

PRT

When the weighing data is printed, ON.

OUT1

When OUT1 (Relay) is operated, ON.

OUT2

When OUT2 (Relay) is operated, ON.

OUT3

When OUT3 (Relay) is operated, ON.

OUT4

When OUT4 (Relay) is operated, ON.

OUT5

When OUT5 (Relay) is operated, ON.

OUT6

When OUT6 (Relay) is operated, ON.

OUT7

When OUT7 (Relay) is operated, ON.

RUN

When the weighing process is going on.

HIGH

When display test is operated, ON

LOW

When display test is operated, ON

Displayed weight unit under Function 103-00

Displayed weight unit under Function 103-01

Displayed weight unit under Function 103-02

Displayed weight unit under Function 103-03

pcs

Displayed weight unit under Function 103-04

Displayed weight unit under Function 103-05

Displayed weight unit under Function 103-06

- 8 -

3-3-3. Key Operation

- Press 4 times within 3secs, to enter to Function setting mode.

- Press 4 times within 3secs, to enter to “Hidden function”mode.

- Make the weight value to Zero (It doesn’t work under hold state or weight is near

zero.)

- Enter to function mode in SET-UP mode.

- Number 1

- Set the TARE Function

1st input : “TARE”, 2nd input : “TARE Reset”

(When “HOLD”or weight value is ZERO, then this key doesn’t work.)

- Number 2

- Set the “HOLD”Function

1st input : “HOLD”, 2nd input : “HOLD Reset”

- Number 3

- Product number setting

- Number 4

- Print out

- Number 5

- Make Run or stop weight mode

- Number 6

- SP1 set value setting

- Number 7

- SP2 set value setting

- Number 8

- SP3 set value setting

- Number 9

- SP4 set value setting

- Number 0

- Cancel or Move to previous step

- Save and Move to next step

- 9 -

3-3-4. Hot key

Double tare setting

(Once tare is set, Another tare is overlapped.)

Print the Sub-total out

Forced discharge

Display the current weight during 5 secs.

Display the Sub-total weight during 5 secs.

Display the Grand-total weight during 5 secs.

Print the Grand-total out

Input Tare Value(when F530 is set as 01)

Delete the Sub-total weight

Delete the Grand-total weight

Max accumulated weighing count : 999,999times

Over 999,999times return to “0” time

Max accumulated weight display : 999999999 (g, kg, ton)

Over 999,999,999 (g, kg, ton) return to “0” (g, kg, ton)

- 10 -

3-4. Rear Panel

(1) AC Power input terminal

(2) External input terminal: User selectable 6EA (Function 156~161)

(3) Serial Interface terminal

Terminal

RxD

TxD

GND

C/L

RS –232

GND

C/L

(4) Loadcell Input terminal

Terminal

EXC+

EXC-

SIG+

SIG-

SHLD

Loadcell

EXC+

EXC-

SIG+

SIG-

SHEILD

(5) Relay output terminal: User selectable 7EA (Function 141~147, COM is common)

Terminal

Relay

output

RELAY 1

RELAY 2

RELAY 3

RELAY 4

RELAY 5

RELAY 6

RELAY 7

RELAY

COM

(6) Analog output terminal

Terminal

4~20mA

(-)

(+)

Option

0~10V

(-)

(+)

Option

(7) Option serial interface terminal

Terminal

RS –232C

GND

Option

RS - 422

TxD-

TxD+

RxD-

RxD+

Option

RS - 485

Unused

D-

D+

Option

Please check the Comm. and other specification in the label, attached on the cover

plate first, and make connection according to that information.

Autres manuels pour SI 410

Table des matières

Autres manuels Sewha Accessoires

Sewha

Sewha SI 4410 Manuel utilisateur

Sewha

Sewha SI 550 Manuel utilisateur

Sewha

Sewha SI 480E Manuel utilisateur

Sewha

Sewha SI 530 Manuel utilisateur

Sewha

Sewha si 4500 Manuel utilisateur

Sewha

Sewha SI 300 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur