Seuic HS200 Manuel utilisateur
SEUIC Technologies Co,. Ltd.
Features of wireless scanner
Definition of indicators
Green LED: Successful decoding indicator
Red LED: Failed decoding indicator (off by default)
Yellow LED: Failed communication
SEUIC Technologies Co,. Ltd.
Battery replacement
Notes:
1. It is recommended to fully charge the battery before use.
2. When the battery power is low, please charge or replace the battery in time.
SEUIC Technologies Co,. Ltd.
Loading direction of scanner onto cradle
Connection of the cradle to external power supply
Connected to external power supply
Note: When it is connected with the USB cable to the power supply, the scanner can be charged; if fast charging is
required, it is recommended to connect it with an external power supply.
SEUIC Technologies Co,. Ltd.
Cable connection of the cradle
Notes:
1. The USB keyboard transmission mode (HID) is set by default in factory. If the default value (*) is not the
SEUIC Technologies Co,. Ltd.
desirable value, you can scan the corresponding setting code in "3) Communication interface settings" in the
"Quick Setting Code of the Wireless Scanner" below to change it.
2. If it is connected via the RS232 cable, please scan the RS232 serial port setting code.
Quick setting code of wireless scanner
1) Restoring the factory settings (The USB keyboard mode (HID) is set for communication by default in factory)
Scanner factory setting Cradle factory setting
2) Displaying the product information
SN information of the scanner Software version of the scanner
SN information of the cradle Software version of the cradle
3) Communication interface settings
* USB keyboard (HID) RS232 串口 RS232 serial port
4) Baud rate of RS232 serial port
9600 19200 38400 57600 *115200
5) Adding enter/line feed suffix
No enter *Enter suffix Enter+line feed suffix
6) Barcode reading setting
SEUIC Technologies Co,. Ltd.
Disable all 1D code system Enable all 1D code system
Disable all 2D code system Enable all 2D code system
Disable all compatible code system Enable all compatible code system
7) Inverse color barcode reading mode
*Disable the inverse color code reading Enable the inverse color code reading
8) Trigger working mode (When the wireless scanner is always on or in auto-sensing mode, the power will be
consumed fast, so such modes shall be triggered with caution)
*Manual trigger Always on for reading Auto-sensing reading
9) Multiple barcode reading mode
*Disable multiple barcodes mode Enable multiple barcodes mode
10) Centering setting
*Disable centering setting Enable centering setting
11) Lighting system setting
*Smart switching mode Locked in white lighting Locked in red lighting
SEUIC Technologies Co,. Ltd.
12) Pre-aim mode setting
After this mode is enabled, if the scanner is in the standby state after being turned on, the aiming light will be
always on. It is convenient for users to align the barcode in advance to complete fast and accurate scanning.
Disable pre-aiming *Aiming light on for 5s Aiming light on for 10s Aiming light on for 30s
13) Vibrator setting
*Disable the vibrator Enable the vibrator
14) Bluetooth pairing connection mode setting
*1V1 communication Multi-point V1 communication
Unlock communication Force pairing
15) Transmission mode setting
*Synchronous mode Asynchronous mode Batch mode
Transmit FLASH barcode Clear FLASH barcode
16) Other settings
Read battery information Power off the scanner
SEUIC Technologies Co,. Ltd.
Description of buzzer status
Indication Prompt sequence of buzzer
Power on Low/medium-/medium+/high beep
Barcode decoded Medium beep
Transmission error detected; data ignored 4 long and low beeps
Parameters set successfully High/low/high/low beep
Correct programming sequence executed High/low beep
Incorrect programming sequence Long and low/long and high beeps
Battery/PowerCap low battery 4 short and high beeps
Status of LED indicators
LED indicator Description
Power indicator
Power indicator in green 51-100% power
Power indicator in yellow 21-50% power
Power indicator in red, indicating low battery
power
0-20% power
Flash in blue (fast/fast/slow) Paging status
Press and hold the scan button for 3 seconds, and the indicator will show the battery power; it will
automatically go off within 5 seconds;
Scan indicator
Off The barcode scanner is turned on and ready to
scan, but the scanner is not powered
Flashing in green The barcode has been successfully decoded
Red Transmission error (off by default)
Yellow Communication failure
Troubleshooting
The wireless scanner does not work
The scanner is not powered Check if the battery power is low
The wireless scanner successfully decodes the barcode, but fails to upload the data to the
host
The host interface is incorrectly configured Scan the appropriate host interface setting code
The cable is loose Make sure that all cable are securely connected
The wireless scanner is not paired with the
cradle
Scan the cradle pairing setting code to ensure
they are paired and connected properly
SEUIC Technologies Co,. Ltd.
The wireless scanner cannot read the barcode
Corresponding code system is not enabled Enable the corresponding code system
The barcode is not readable Make sure the barcode is intact; try to scan the
same type of barcode for test
The distance between the scanner and the
barcode is incorrect
Adjust the reading distance of the scanner
Precautions for safety
·Do not look directly at the laser scanning head during scanning to avoid accidental injury.
·Please use the battery and power adapter specified by Jiangsu Seuic Technology Co., Ltd. to prevent explosion or
damage to the equipment.
·Do not short-circuit the battery and the power adapter, or touch the battery with metal or other conductive objects.
·Do not immerse the battery in or contact with water or other liquids; do not expose the battery to open flames,
sources of explosion, or other hazardous sources such as microwave ovens and dryers.
·Do not immerse the USB cable in water, and keep it away from fire.
·If you suspect that the device or battery is damaged, please contact your supplier for help.
Technical Support
Please log onto the official website of the product www.chinaautoid.com to learn about the detailed user manual of
this product and download the supporting software and development kits of related functions to help you make
better use of this machine.
2021 SEUIC Company. All rights reserved.
Without consent of SEUIC, it is strictly prohibited to copy, spread, distribute and store any information in this
document in any form.
SEUIC Technologies Co,. Ltd.
Add.: NO.15 Xinghuo Road, Nanjing New & High Technology Industry Development Zone Nanjing, 210061
P.O.: 210061
Tel.: 86-25-52261298
Fax: 86-25-52268995
Enterprise website: www.Seuic.com
Product website: www.ChinaAUTOID.com
Service hotline: 400-677-0876
Table des matières
Autres manuels Seuic Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
