setro miniK10m Manuel utilisateur
CABINETS | LOCKERS | BOXES
Operating
manual
The easy lock
in every aspect
Index
Operating manual
Introduction
Description
Usage
Initial setup
Assign Master card
Selecting Operation option of the miniK10
Assign/Delete Service card / cards
Assign User card / cards
Deleting User card
Operating instructions
Personal operation with card (if selected)
To Unlock
To Lock
Locker mode operation with card (if selected)
To Lock
To Unlock
Cardless personal operation (if selected)
Change Password
To Unlock with Password
To Unlock with Cards
To Lock with Password
To Lock with Card
Cardless locker mode operation (if selected)
To Lock with Password
To Lock with Card
To Unlock with Password
To Unlock with Cards
Locker Mode Operation with Card
or Password to Lock/Unlock (if selected)
To Lock with Password
To Unlock with Password
To Lock with any card
To Unlock with any card
4
4
5
5
5
5
6
6
6
7
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
10
10
11
11
11
12
12
Index
Programming instructions
Restore Default Settings: Press 0 - 1
Default Settings are
Mute Operation: Press 2 - 0
Audible Operation: Press 2 - 1
Penalty Operation: Press 3 - 1
Delete All Uvser Cards: Press 4 - 0
Reset User Password: Press 4 - 1
Locking with password / card: (1) Press 6 - 0
Automatic Locking (without password/card): (1) Press 6 - 1
Warning of open door : (1) Press 7 - 1
Resetting User Password with Service card usage: (1), (2) Press 8 - 1
Blocking the lock : (2) Press 9 - 1
Light and audio warning
Maintenance
General warnings
Cams
Other
Limited warranty
Liability limits
Technical specications
K10p card specications
K10m Appropriate card
Thank you
Quick info
Installation
Installation Overview
Mounting on Left & Right Door
Mounting Template
Joint erect lock assembly measurements
Recessed cover assembly measurements
Overlapping / external cover assembly measurements
Replacing existing lock
New Install
Warnings for mounting
13
13
13
13
13
13
13
13
14
14
14
14
14
14
16
16
16
16
17
17
17
18
18
18
19
21
22
23
26
27
28
29
30
30
31
1. Red LED
2. Green LED
3. Keypad
4. Lock Body
5. Closing Position
6. Knob Indicator
7. Opening Position
8. Knob
9. Mounting Screw
10. Lock Body
11. Battery Cover
12. Battery Cover Screw
13. ID Label
14. Hand Knob Frame
15. Cam
16. Cam Screw
17. Cylinder Nut, R/L Stop Cam
Front Back
Introduction
19
10
11
12
13
14
15
16
17
2
3
4
5
15
6
77
8
Besides the stylish and enriching design of the miniK10m / miniK10p cabinet lock, there
are various features that make the lock dierent from others, such as allowing to use
with wet hands, easy and quick installation at wood and steel cabinets, easy application
at existing cabinets, easy application at right/left cabinet doors, higher battery life with
very low energy consumption, high reliability and operating with a contactless card.
Description:
4
Contactless card lock can be used with three types of cards:“User Card,
Service Card and Master Card”. Also, the lock can be used with a password
by selecting the user card free operation. Service card is passive by default.
You should center the card when holding over the keypad to enable accurate
reading. Since the device enters the sleep mode to oer low
energy consumption, you need to wake the lock
up by pressing any button before each operation.
Assign Master card:
1- Press , two tone beep is heard.
2- And then present the master card to the keypad until one tone beep
is heard and green led blinks.
Selecting Operation option of the miniK10:
1- Press , present the master card to the keypad and press ,
green and red leds blink.
2- Press 1 for selecting operation options. And then
Press 0 for personal operation with card.
Press 1 for locker mode operation with card.
Press 2 for cardless personal operation.
Press 3 for cardless locker mode operation.
Press 4 for locker mode operation card or password.
Usage:
Initial setup:
This step is valid if
there is no assigned
Master Card before.
5
Assign/Delete Service card / cards:
(If you don’t need to use any service card, skip this step)
1- Press , present the master card to the keypad and press ,
green and red leds blink.
2- Press 5 for selecting service card assign / delete option. And then
Press 0 for all service cards are deleted.
Press 1 for assignment of 1. service card.
Press 2 for assignment of 2. service card.
Press 3 for assignment of 3. service card.
3- Present that service card to lock.
Assign User card / cards:
(If you don’t need to use any user card, skip this step, when personal operation
with card option is selected)
1- Press and then present master card to the keypad, press again.
2- Then enter the sequence number of user card
3- Present that card to lock.
Deleting User card:
(If you don’t need to use any user
card, skip this step, when personal
operation with card option is selected)
1- Press and then present master
card to the keypad, press .
2- Then enter the sequence number of user card.
Sequence
Number
Sequence
Number
6
Personal operation with card (if selected)
To Unlock:
1- Press any number button for wake the lock up.
2- Present any assigned user card / master card /
service card to the keypad in 3 seconds.
3- turn the handle to the unlocked position.
To Lock:
1- Press any number button for wake the lock up.
2- Present any assigned user card / master card to the keypad in 3 seconds.
3- Turn the handle to the locked position.
Locker mode operation with card (if selected)
To Lock:
1- Press any number button for wake the lock up.
2- Present any card / master card to the keypad in 3 seconds.
3- Turn the handle to the locked position.
Operating instructions:
7
To Unlock:
1- Press any number button for wake the lock up.
2- Present any card / master card / service card to the keypad in 3 sec.
3- Turn the handle to the unlocked position.
Cardless personal operation (if selected)
Change Password: (default “1010”)
1- Press and then enter the old password by pressing number
buttons, press again.
2- And then enter the new password by pressing number button, press
To Unlock with Password: (default “1010”)
1- Enter the user password. 2- Turn the handle to the unlocked position.
To Unlock with Cards:
1- Press button for wake the lock up.
2- Present master card / service card to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
USER PASSWORD
OLD PASSWORD NEW PASSWORD
8
To Lock with Password: (default “1010”)
1- Enter the user password. 2- Turn the handle to the locked position.
To Lock with Card:
1- Press button for wake the lock up.
2- Present master card to the keypad in 3 seconds
3- Turn the handle to the locked position.
To Lock with Card:
1- Press button for wake the lock up.
2- Present master card to the keypad in 3 seconds
3- Turn the handle to the locked position.
Cardless locker mode operation (if selected)
To Lock with Password: (default “1010”)
1- Enter the new password. 2- Turn the keypad to the locked position.
USER PASSWORD
LOCKER MODE PASSWORD
9
To Unlock with Password:
1- Enter the same password with locking operation.
2- Turn the handle to the unlocked position.
To Unlock with Cards:
1- Press button for wake the lock up.
2- Present master card / service card to the keypad in 3 seconds
3- Turn the handle to the unlocked position.
LOCKER MODE PASSWORD
The unlocking direction depends on the type of door where miniK10 is
used. All locking and unlocking illustrations depict right handed door
installation.
10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels setro Verrouillage
