Server Express 07392 Manuel utilisateur

Server Express®

Pumps

for purchasing our Server Express®Pump.

Express™ pouched condiment systems are sealed and

sanitary, achieve excellent evacuation and have only a

few parts for easy clean-up.

SIMPLIFY CONDIMENT MANAGEMENT— GO POUCHED

Thank You

MODELS:

07392

07398

Used with pouches up to

1½ gallons with 16mm tments.

Page 2

ASSEMBLY WASH ALL PARTS

PROPERLY BEFORE USE. See page 3.

Wrap loop

around lower

opening to

secure dome.

Lubricate with a small amount of clean water.

Rotate and position until both pegs on

housing t into holes on tube.

INSTALL TUBE

INSTALL DOME

Fittings are marked small,

medium or large on bottom.

SELECT DISCHARGE FITTING

into pump housing discharge tube.

Place loop of tting around peg on end of

discharge tube to secure.

INSERT DISCHARGE FITTING

Lubricate with a small amount of clean water.

Rotate and position until both pegs on

connector t into holes on tube.

Connector must point away from end of

discharge tube.

INSERT CONNECTOR

INSERT PINCH VALVE

into pump housing.

Press dome into

housing fully.

Ensure valve ap

covers bottom

opening.

TIP: Squeeze the pinch valve

open before installation to

ensure it isn’t stuck shut.

if applicable. Page 4 lists discharge tting

size(s) included with each pump model.

THIN (hot sauce)

THICK (ketchup or mustard)

THICKER (relish or tartar sauce)

CONSISTENCY OF

WHAT YOU DISPENSE SUGGESTED

FITTING SIZE

SMALL

MEDIUM

LARGE

Page 3

CLEANING

RINSE fully with clear water.

SANITIZE

all parts according to local sanitization

requirements. All parts in contact with food

must be sanitized.

AIR DRY all parts fully.

Use dishwashing soap,

hot water

and nylon brush

YES!

• Dishwasher safe

• Do not use abrasive, caustic or ammonia

based cleansers.

• Do not use cleansing agents with high

concentrations of acid, alkaline or chlorine.

• Do not use metal scrapers or cleaning

pads that could scratch surfaces.

DISASSEMBLE & CLEAN

all washable parts with soap and hot water.

Use brush to clean any conned areas.

FLUSH & RINSE

all pump surfaces with hot water.

Place lower end of pump into container

of hot water and operate pump until all

remaining product is expelled and only hot

water is discharged.

SAFETY DISASSEMBLY

According to food and safety regulations, most foods

must be stored and/or served at certain temperatures

or they could become hazardous. Check with local food

and safety regulators for specic guidelines. Server

Products, Inc. cannot be responsible for the serving of

potentially hazardous product.

IMPORTANT

Clean, rinse, sanitize, and dry parts daily or regularly to

comply with local sanitization requirements.

NSF International lists this pump as:

“Not acceptable for dispensing

potentially hazardous foods.”

TIP: Squeeze the pinch valve

open before installation to

ensure it isn’t stuck shut.

TROUBLESHOOTING

• Ensure pinch valve is inserted in housing.

• Ensure connector is snapped fully in place to

tment in pouch.

• Ensure pump is properly installed in unit.

• Clean pump thoroughly.

PRODUCT DOESN’T PUMP?

• Wet parts with clean water to help t.

DIFFICULT TO ATTACH PARTS?

• Clean thoroughly. Food residue could prevent

a tight seal between dome and housing.

• Ensure dome edges are ush with housing.

DOME POPS OFF?

Page 4 Manual #EM_01758_RevD 020822

PART QTY DESCRIPTION

07089 1 7" TUBE

07798 1 LARGE PINCH VALVE

07381 1 CONNECTOR, 16MM

07388 1 PUMP HOUSING

DOME

PINCH VALVE

07798

PUMP HOUSING

07388

TUBE

07089

CONNECTOR

07381

DISCHARGE

FITTING

PUMP COMPONENT PART NUMBERS

DOME FOR MODELS 07392, 07398

07383 1

PUMP DOME, BLACK

DISCHARGE FITTINGS (VARIOUS SIZES)

07795 DISCHARGE FITTING, .156, SMALL

07796 DISCHARGE FITTING, .256, MEDIUM

07797 DISCHARGE FITTING, .394, LARGE

PUMP INCLUDED

MODEL DISCHARGE FITTING(S)

07392 MEDIUM & LARGE FITTINGS

07398 MEDIUM FITTING

SERVER PRODUCTS

LIMITED WARRANTY

This Server product is backed by a two-year

limited warranty against defects in materials and

workmanship. See Server-Products.com for details.

GENERAL SERVICE,

REPAIR OR RETURNS

Before sending an item to Server Products, contact

Customer Care to request a Return Authorization

Number. The RA Number ensures proper processing

and a prompt turnaround. Repaired units are typically

shipped out within 48 hours of receipt.

Merchandise returned for credit will incur a 20%

restocking charge, must be less than 90 days old, and in

unused (new) condition. Electrical parts (thermostats,

heating elements, etc.) are not returnable.

NEED HELP?

Please be prepared with the Part Numbers for your

items. Individual part numbers are listed above.

Chat with us!

[email protected]

262.628.5600 | 800.558.8722

Server Products Inc.

3601 Pleasant Hill Road

Richfield, WI 53076 USA

Ce manuel convient aux modèles suivants

Autres manuels Server Pompe à eau

Server

Server BP-1 Manuel utilisateur

Server

Server 85820 Manuel utilisateur

Server

Server CP-3L Manuel utilisateur

Server

Server SOLUTION Manuel utilisateur

Server

Server CP-MEC3 Manuel utilisateur

Server

Server Express 07745 Manuel utilisateur

Server

Server 100239 Manuel utilisateur

Server

Server 88521 Manuel utilisateur

Server

Server TABASCO 88521 Guide de configuration

Server

Server SERVE BETTER CP-1/2 Manuel utilisateur

Server

Server 100239 Manuel utilisateur

Server

Server CP-200 Manuel utilisateur

Server

Server 07794 Manuel utilisateur

Server

Server Eco Pump BP-1/4 Manuel utilisateur

Server

Server TPV-L Manuel utilisateur

Server

Server Serve Better CP-RP Manuel utilisateur

Server

Server SP-3 Manuel utilisateur

Server

Server SP Manuel utilisateur

Server

Server SOLUTION PUMP 81910 Manuel utilisateur

Server

Server BP-1/4 Manuel utilisateur

Server

Server FP-1/9 Manuel utilisateur

Server

Server EXTREME 07518 Manuel utilisateur

Server

Server BP-1 Manuel utilisateur

Server

Server Express 07737 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur