Serene Sereonic BT-200 Manuel utilisateur
OPERATING GUIDE
MODEL BT-200
Thank you for purchasing this product.
Please read before use.
Keep this manual for future reference.
Thank you for purchasing the SEREONIC TV-SoundBox. Please
read this operating guide very carefully before use and keep it
for future reference. If you have any questions, please free to
contact our Customer Support Department
Please read these instructions carefully before using the SERE-
ONIC TV-SoundBox.
Always keep the system dry. Do not immerse in water.
For your safety, do not attempt to open the unit. Attempt-
ing to open the unit violates your warranty.
SEREONIC TV-SoundBox use a standard 18650 type
Lithium-Ion battery. Please observe the safety and
handling instructions for the lithium-ion batteries. Please
dispose of the unit/used batteries properly, following
local regulations. Do not dispose of the unit/used batter-
ies in the household trash. Do not incinerate. Take the
equipment to a nearby recycle center.
Do not unplug by pulling on power cord. To unplug, grasp
the plug, not the power cord. Unplug from outlet before
servicing or cleaning. Do not operate any device with a
Toll-Free Help Line: 866-376-9271 (8AM-5PM PST; M-F)
IMPORTANT SAFETY INSTRUCTIONS: There are multiple ways to connect your SEREONIC TV-Sound-
Box.
CONNECTING YOUR SEREONIC
TV-SoundBox:
Connect using the Analog Audio out on your TV
(see Fig. 1. If Analog Audio connections are occupied
see Fig. 1A)
Option 1:
Connect using the TV headphone output jack. (See
Fig.2)
Option 2:
Connect using your Satellite/Cable-box Analog Audio
connections. (See Fig. 3. If your Analog Audio connec-
tions are occupied see Fig. 1A).
Option 3:
Connect using the Optical Audio output form your TV
or Satellite/Cable-box. (See Fig 4)
Option 4:
Connect using HDMI output from your Satellite/Ca-
ble-box. (See Fig 5)
Option 5:
Connect to streaming app such as Netflix or other
similar apps. (See Fig. 6)
Option 6:
damaged cord or plug, or after the device malfunctions, or is
dropped or damaged in any manner. Return device to the
nearest authorized service facility for examination, repair or
electrical or mechanical adjustment.
01. www.sereneinnovations.com
Copyright 2020 Serene Group, Inc. All rights reserved. 02.
PACKAGE CONTENT CHECK:
Wireless
Receiver
(Speaker)
Transmitter Base
Operating Guide Analog Audio Cord
AC Adapter RCA Y-Adapter Cables (X2)
Digital Optical Cord*
*(Please remove plastic cap from
Optical cord tips)
Fig. A
03. www.sereneinnovations.com
PRODUCT FEATURES:
Speaker
Base
On/Off & Volume Control
Low Battery/
Charging indicator
Power indicator/
Pairing indicator
Pairing button/
Sleep timer
Headphone
Tone Control AC Adapter
Audio Input
Optical Input USB Power Out
AC Adapter Pairing Button
Audio input
(when used as stand alone Speaker)
Fig. B Fig. C
Copyright 2020 Serene Group, Inc. All rights reserved. 04.
CONNECTIONS & SET UP:
Connect to the RCA Analog Audio out on your TV:
If RCA connections are occupied by another device:
01
Connect the Base to the back of the TV using the RCA to 3.5mm
cable as shown below. Once audio is detected, the green LED on
the Base will stop flashing; a slow blinking LED indicates audio is
NOT detected. Make sure your TV is on and the Audio settings in
your TV is set to output sound to external speakers.
*If RCA audio connection on your TV are occupied by another
device, use the supplied Y Splitters cables as shown in Fig. 1A
If RCA audio connections are occupied by another device, use
the supplied RCA Y Splitters cables as shown below
* See Fig. 1 A if connection is occupied
AC Adapter Base
Audio Cable
Fig. 1
Fig. 1A
Y Splitters
provided
To other device To other device
Audio Cable
AC Adapter
05. www.sereneinnovations.com
Base
Fig. 2
Connect to the TV headphone output jack:02
Connect the Base to the back of the TV using the RCA to 3.5mm
cable as shown below. Once audio is detected, the green LED on
the Base will stop flashing; a slow blinking LED indicates audio is
NOT detected. Make sure your TV is on and the Audio settings in
your TV is set to output sound to external speakers.
Connect to the Satellite/Cable box RCA output:03
Connect the Base to the RCA audio output on the satellite/ca-
ble-box using the supplied RCA to 3.5mm cable as shown below.
*If RCA audio connection on your Satellite/cable-box are
occupied by another device, use the supplied Y Splitters cables
as shown in Fig. 1A.
Headset
Jack Output
AC Adapter
Audio Cable
Fig. 3
TV Cable/Satellite Box,
Set Top Box, DVD Player, Blue-ray
Player and Gaming Console
* See Fig. 1A if connection
is occupied
AC Adapter
Audio Cable
01.
02.
03.
Copyright 2020 Serene Group, Inc. All rights reserved. 06.
Fig. 4
Fig. 5
Connect to Optical Audio output on your TV:04
Connect the Base to the TV Optical audio output using the
supplied optical cable as shown below. Please make sure Digital
Audio setting is set to PCM format. You can change your audio
setting in the audio/sound section of your TV menu.
Connect to HDMI output on your Satellite/Cable box:05
This connection requires HDMI converter (sold separately).
First connect HDMI cable from the HDMI out on your
Satellite/Cable-box to the HDMI input on the converter
Connect another HDMI cable from the converter HDMI
output to the HDMI input on your TV.
Connect the Base to the HDMI converter using the
supplied RCA to 3.5mm cable as shown below.
Cable/Satellite Box or
Set Top Box
HDMI to Analog
Converter HDMI Cable
HDMI Cable Audio
Cable
AC
Adapter
HDMI OUT HDMI IN
HDMI OUT
HDMI IN
Base
Optical Audio Cable*
*(Please remove plastic cap from
Optical cord tips)
AC Adapter
TV Optical Out
07. www.sereneinnovations.com
Fig. 6
Connect to streaming app such as Netflix:06
Some video services stream their program with 5.1Ch. Dolby
Digital Audio. BT-100 is not equipped to decode Dolby digital
audio stream. You can use one of the two methods below to
connect your BT-100 to streaming services such as Netflix or
other similar streaming services.
01.
02.
Change the audio setting on your TV to PCM audio. If your
TV does not support PCM, use method 2 below.
Connect the Base to your TV or console that is streaming
the video service via Optical audio connection using a
Digital to Analog converter (sold separately) as seen in
Fig. 6. On the right.
Optical Audio
Cable* AC Adapter
Audio Cable
*(Please remove plastic
cap from Optical cord tips)
Base
TV Optical Out
Copyright 2020 Serene Group, Inc. All rights reserved. 08.
Newer TVs have the option to set digital audio output to either
Dolby or PCM (you can find what type of output your TV has in
the audio/sound section of your TV menu). The SEREONIC
TV-SoundBox only works with PCM digital audio format. If you
are using the Optical Audio connection as shown in Fig. 4, set
your TV to PCM digital output. If your TV does not support PCM
audio format and can only output Dolby Digital, you will need to
use a Digital to Analog converter as shown in Fig. 5. Please
note that some streaming services such as Netflix or other
similar services will at times stream a program with Dolby
Digital audio format.
DOLBY DIGITAL 5.1 and PCM
(PULSE CODE MODULATION):
It is recommended to place the Base of the SEREONIC
TV-SoundBox on top of your TV stand next to your TV as shown
below.
PLACEMENT OF THE SEREONIC
TV-SoundBox BASE:
Place the Speaker on the Base as shown below for 4+ hours
before first use. During charging, the low battery/charge green
LED indicator blinks. When the Speaker is fully charged, the
green LED will stop blinking and stay steadily lit. A fully charged
battery will provide you about 7.5 hours of listening time at
moderate volume.
When the Speaker is not in use or when the low battery indicator
blinks, place the Speaker back on the Base for recharging.
CHARGING:
09. www.sereneinnovations.com
The SEREONIC TV-SoundBox is designed with a built-in,
one-hour sleep timer to gently reduce the speaker volume
gradually over 1 hour to allow you to fall asleep and will automat-
ically power off after 1 hour.
OPERATIONS:
01.
02.
Rotate the knob to turn Speaker On or Off and to adjust its
volume. The blue ring light will be on.
The SEREONIC speaker volume control works
independently from your TV speakers, you can turn down
your TV speakers to low or off. On some TV's, you may
need to use your remote to go into the TV menu to
achieve an optimal audio/speaker setting. Please refer to
your TV user manual for details.
03. To conserve battery power, the Speaker will turn itself off
if no audio signal is received from the Base for a period of
2 minutes.
04. Set the Tone Control on the back of the Speaker to a
position that enables you to hear and best understand
the audio dialog.
01.
02.
Press the SLEEP button once on the side of the Speaker
to start the timer. The volume knob ring light will slowly
fade in and out.
At certain timer intervals, the speaker volume will be
gradually reduced to help you fall asleep.
Note: The Speaker will not turn itself back on automatically
after auto power off. To turn the speaker on after auto power
off, rotate the volume knob to the off position and turn the
Speaker on again.
Back of Speaker
Tone Adjustment
Sleep Timer
To turn on the 1-hour Timer:
Table des matières
Langues :
Manuels Système de haut-parleurs populaires d'autres marques
Sondpex
Sondpex Active Speaker System and Digital Music... Manuel utilisateur
JVC
JVC NX-PN7 Manuel utilisateur
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuel utilisateur
Yamaha
Yamaha NX-A01 - Speaker Sys Manuel utilisateur
SE Audiotechnik
SE Audiotechnik I-LINE Manuel utilisateur
Gemini
Gemini WRX-843 Series Manuel utilisateur