SERD Taurus AB Manuel utilisateur

Operating Instructions

DECT Telephone

Model SERD Taurus (Concord II) AB

IMPORTANT!

This device can only work properly with the included

telephone connection cable (TAE cable)

Controls of the telephone and symbols on the LCD

Explanatory note: Design and precision of the illustration may be subject to change.

Handset

<1> LCD

<2> Talk

<3> OK

<4> Page up

<5> Page down

<6> Recall key

<7> Delete

<8> Transfer

<9> Menu

<10> Dial buttons

Base station

<11> 'In use' LED

<12> Power LED

<13> Page

<14> AC power adaptor jack

<15> Telephone line cord jack

123456789000

1514

Chars and symbols on the display

7-segment-char display

for numbers and letters

Caller display (clip)

Microphone symbol

(mute symbol)

Antenna symbol

Phone book symbol

Battery symbol

Talk symbol

10:48

0621

JOHN SMITH

Caution!

You cannot make emergency calls without a main current entry!

Use re-chargeable batteries for the handset!

Only replace the batteries with identical ones

or with others recommended by the manufacturer!

Make sure to dispose of the batteries in an environmentally friendly manner!

Table of Contents

2Version no. 12-03E

Table of Contents

Controls of the telephone and symbols on the LCD

1 Safety instructions ................................................................................................. 5

2 Connection and commissioning ........................................................................... 7

3 Basic functions ....................................................................................................... 9

3.1 Setting date and time........................................................................................... 9

3.2 Changing the handset name.............................................................................. 10

3.3 Setting the language.......................................................................................... 11

3.4 Setting melody and volume ............................................................................... 12

3.5 Setting the handset volume ............................................................................... 12

3.6 Setting the key beep.......................................................................................... 13

3.7 Dialling numbers with display on the LCD.......................................................... 13

3.8 Manual dialling (without display on the LCD) ..................................................... 14

3.9 Saving the last 10 numbers dialled .................................................................... 14

3.10 Accepting a talk ................................................................................................. 14

3.11 Recall (call waiting) ........................................................................................... 15

3.12 Paging (radio paging) ........................................................................................ 15

3.13 Pause ................................................................................................................ 15

3.14 Warning: Battery low ......................................................................................... 16

3.15 Out of range ...................................................................................................... 16

3.16 Memory ............................................................................................................. 17

3.17 BABY CALL ....................................................................................................... 17

3.18 Inband signalling ............................................................................................... 18

4 Phone book ........................................................................................................... 19

4.1 ADD ENTRY...................................................................................................... 19

4.2 EDIT entry ......................................................................................................... 20

4.3 DELETE entry ................................................................................................... 21

4.4 SEARCH entry................................................................................................... 21

Table of Contents

Version no. 12-03E 3

5 CALLER DISPLAY ................................................................................................23

5.1 CALLER LIST.................................................................................................... 23

5.2 CALLER DISPLAY ............................................................................................ 24

5.3 Viewing the caller list ........................................................................................ 25

5.4 Recall from number list ..................................................................................... 26

5.5 Deleting calls from the caller list........................................................................ 26

6 Further functions ..................................................................................................27

6.1 Changing the base station PIN.......................................................................... 27

6.2 Setting a prefix code ......................................................................................... 28

6.3 Barring numbers................................................................................................ 29

7 Accessory functions ............................................................................................31

7.1 Registering handsets at the base station........................................................... 31

7.2 Signing off handsets from the base station........................................................ 33

7.3 Selecting the base station ................................................................................. 34

7.4 Priorities for handset ringing sequence ............................................................. 35

7.5 Internal talks (transfer) ...................................................................................... 37

7.6 Handing over external talks............................................................................... 38

7.7 Teleconference ................................................................................................. 39

8 Answering machine ..............................................................................................40

8.1 Recording and repeating your outgoing message ............................................. 40

8.2 Setting the answer delay ................................................................................... 42

8.3 Setting the answer mode................................................................................... 43

8.4 Setting the message text (outgoing message - OGM) ....................................... 44

8.5 Setting the speaker volume............................................................................... 45

8.6 Call Screening................................................................................................... 46

8.7 Recording the memo ......................................................................................... 47

8.8 Answering calls and recording incoming messages .......................................... 48

Table of Contents

4Version no. 12-03E

8.9 Setting the remote control code ......................................................................... 50

8.10 Message playback............................................................................................. 51

8.11 Deleting messages ............................................................................................ 52

8.12 Remote control .................................................................................................. 53

9 Notes on battery usage ........................................................................................ 54

10 Cleaning ................................................................................................................ 55

11 Problems and solutions ....................................................................................... 56

Accompanying document

Safety instructions

Version no. 12-03E 5

1 Safety instructions

1. Please read all the instructions in this manual prior to commissioning the product.

2. Adhere to all instructions displayed on the product.

3. Install the product on a solid base and make sure no-one can trip over the telephone

cable.

4. Do not fasten the AC-cable to the mounting base with metal devices.

5. This product should only be operated from a power source indicated on the product. If

you are not sure which type of power connection applies to the location of installation,

please contact your local power company.

6. Never use this product in the vicinity of water or with wet hands. Should the product get

in contact with liquid, disconnect it from the mains immediately and contact the repair

service.

7. To avoid electrical shock, please do not expose the product to rain or other sources of

humidity.

8. Prior to cleaning the product, disconnect it from telephone socket and power supply.

Use a soft, damp cloth for cleaning. Do not use cleaning liquids, aerosol cleaners or

abrasives to clean the product.

9. Since electric shock can also be caused by lightning, you should refrain from installing

or using the product during thunderstorms.

10. If the product does not function properly or if it is damaged, do not open the casing and

do not try to repair the device yourself. Noncompliance will void your warranty claim.

Furthermore you expose yourself to dangerous electric shock and other risks. Please

contact the repair service.

11. Do not use metallic objects to connect the loading terminals at the base station, since

that may cause fire through a power source overload.

12. Use only the charging device included in the delivery scope to re-charge the batteries.

13. Never use conventional (i.e. non-rechargeable) batteries. Only use approved (re-

chargeable) batteries of the same kind, since you may otherwise cause battery failures.

Safety instructions

6Version no. 12-03E

14. Dispose of damaged batteries in accordance with existing rules and regulations.

15. Do not touch the insulated telephone wires or -terminals, unless the connections of

telephone cables and power supply lines were disconnected beforehand.

16. Do not overload the wall outlets and extensions cords, since it may lead to electric

shock.

17. The handset may impair proper functionality of medical devices.

Connection and commissioning

Version no. 12-03E 7

2 Connection and commissioning

1. Connect the telephone cable to the TAE-female connectors, the one end to the wall and

the other to the base station (see fig. 2-1).

2. Connect the base station to the mains by plugging the AC-adapter into the base

station's power socket (see fig. 2-1). The base station's power-LED lights up.

Fig. 2-1 Connecting the TAE-connection cable (left) and the mains supply line (right)

3. Open the handset's battery compartment and insert re-chargeable batteries. Pay

attention to the correct polarity (see fig. 2-2). Close the battery compartment again.

Under no circumstances should you use non-rechargeable batteries.

4. After five seconds the handset will emit a greeting tone to confirm the power connection

reset. Place the handset into the base station for a loading period of approximately ten

hours prior to using it for the first time.

The battery symbol starts to indicate.

Connection and commissioning

8Version no. 12-03E

NOTE: If the handset's batteries are entirely empty, the base station will do a quick re-

load for a couple of hours and then change to the slow loading process. The handset

will warm up during quick loading. This warming is normal and in no way dangerous.

The handset will cool down slowly once the batteries are almost fully charged.

5. On delivery, the base station is already registered with the base station. The antenna

symbol should always be active to show that the handset is synchronised with the

base station. If the antenna symbol indicates, operate the -key to activate

synchronisation.

Fig. 2-2 Insert the batteries and close the lid of the compartment

Explanatory notes:

1. This product works on a frequency of 1.89 GHz.

2. Place the base station on a high level to ensure the best possible operating range.

3. Do not install the base station in bathrooms.

4. The range of the DECT-telephone may vary depending on the operating surroundings.

AAA

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SERD Téléphone sans fil

SERD

SERD Taurus AB Bundle Manuel utilisateur

SERD

SERD Taurus Manuel utilisateur

SERD

SERD Taurus Quattro Manuel utilisateur

Manuels Téléphone sans fil populaires d'autres marques

3Com

3Com NBX Manuel utilisateur

Panasonic

Panasonic KX-TGK210HK Manuel utilisateur

Panasonic

Panasonic KX-TCA181EX Manuel utilisateur

BT FREESTYLE 3200 Manuel utilisateur

AT&T

AT&T CL84102 Manuel utilisateur

BREZZICNI

BREZZICNI CL-3622 Manuel utilisateur

Panasonic

Panasonic KX-TG1831NZ Manuel utilisateur

Panasonic

Panasonic KX-TG7301E Manuel utilisateur

Furuno

Furuno FM-4721 Manuel utilisateur

Sanyo

Sanyo CLT-J70 Manuel utilisateur

Amplicomms

Amplicomms BigTel 201 Manuel utilisateur

GE 26992 Manuel utilisateur

AT&T

AT&T E1812B Manuel utilisateur

Sanyo

Sanyo CLT-670 Manuel utilisateur

GE 15432970 Manuel utilisateur

Curtis

Curtis TC595 Manuel utilisateur

Gigaset

Gigaset Gigaset 3000 Micro Manuel utilisateur

Poly

Poly VVX D230 Guide de configuration