Serato Reloop Ready Manuel utilisateur

Quick-Start Guide

Reloop

Ready

Setup

Overview

Left Side

Right Side

Serato Software

The Reloop Ready is a “Serato DJ Lite hardware unlocked” device, so it works with Serato DJ Lite out of

the box. It is a “paid upgrade to Serato DJ Pro device”, meaning it requires the purchase & activation of a

Serato DJ Pro license, in order to be used with Serato DJ Pro.

You can trial Serato DJ Pro, for up to 14-days.

Click here to nd out more about buying or activating Serato DJ Pro

Please ensure you have the latest version of Serato DJ Pro installed:

Click here to download Serato DJ Pro

Driver Software

The Reloop Ready does not requires manufacturer specic drivers on Mac computers. Windows computers

require a device driver to be installed. This can be downloaded from Reloop’s website here.

#Reloop Ready

CONTROL

FUNCTION

1 KENSINGTON LOCK Connect your 1/4” headphones to this output for cueing

2 PC USB Connect USB cable to this port from computer

3PC/IOS SWITCH Switch between PC (Serato) and IOS device

4 IOS USB Used for IOS connection

51/8” HEADPHONE JACK Connect your 1/8” headphones to this output for cueing

6 CUE VOL Adjust the volume of the headphones

7CUE MIX Adjust the level of cue and master heard in the headphones

8MASTER VOL Adjust the master output volume

9MASTER OUTPUT Use RCA cables to connect this output to a speaker or powered monitors

1 2 3 4

98765

#Ready

CONTROL

FUNCTION Shift

1FX LEVEL Adjust FX depth parameter for FX 1, 2 & 3 -

2FX UNIT Enable FX 1, 2 & 3 FX select

3LOAD CHANNEL 1 Load currently highlighted track to deck 1 -

4 LOOP Scroll to choose size of loop, press to activate loop FX beat select/Tap

5TEMPO SLIDER Adjust playback tempo of current loaded track Ignore tempo slider

6CHANNEL GAIN Adjust channel gain -

7BROWSE Scroll library or crate list/Library back Fast scroll

8CHANNEL EQ Adjust channel EQ -

9LOAD CHANNEL 2 Load currently highlighted track to deck 2 -

10 JOG WHEEL Control the waveform within Serato DJ Pro Platter skip

11 PARAMETER LEFT Adjust the pad mode parameters Parameter 2 Left

12 PARAMETER RIGHT Adjust the pad mode parameters Parameter 2 Right

13 PLAY Play or pause the currently loaded track Censor

14 CUE Set/play from a temporary cue point Jump to start

15 HEADPHONE CUE Enable to monitor the channel through the headphones Adjust Tempo Range

Overview

1 2 4 6 7 108 93 5

24 11

19 151618 17 14 1321 20

Performance Pads

The Reloop Ready comes with 8 performance pads, that can be used across 9 dierent performance pad

modes in Serato DJ Pro. These consist of:

HOT CUE mode: Hold the MODE button and press PAD 1 to select HOT CUE mode. In this mode pads

1-8 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/pad, pressing that pad will

set a Cue point. Holding down the SHIFT button while pressing a pad will delete the Cue point from the

respective pad/slot.

AUTO LOOP mode: Hold the MODE button and press PAD 2 to select AUTO LOOP mode. Pads 1-8

trigger an autoloop of variable sizes. Use the loop selection area in the Serato DJ Pro user interface, to

inuence the 8 available autoloop sizes. This can be adjusted with the PARAMETER buttons.

MANUAL LOOP mode: Hold the MODE button and press PAD 3 to select MANUAL LOOP mode. In this

mode, PAD 1 sets the in point and PAD 2 sets the out point. PAD 3 will Enable/Disable the loop and PAD 4

will trigger Reloop.

SAMPLER mode: Hold the MODE button and press PAD 4 to select SAMPLER mode. Press pads 1-8

in this mode to trigger samples loaded into the Serato DJ Pro Sampler. Use the PARAMETER buttons to

move through banks A to D.

#Ready

CONTROL

FUNCTION SHIFT

16 SHIFT Used with other controls that have shift modier functions -

17 CROSSFADER Fade audio between the channels -

18 CHANNEL FADER Adjust channel volume Fader Start

19 CHANNEL FILTER High and Low pass channel lter -

20 SYNC Turn Sync on for the respective deck Turn o Sync

21 MODE Hold and press in combination with a pad to select a pad mode User Mode

22 PERFORMANCE

PADS

SEE PERFORMANCE PAD SECTION BELOW FOR MORE

INFORMATION

23 VINYL Turn vinyl mode on/o for the respective plater Turn Slip on/o

24 KEYLOCK Enable and disable Key Lock for deck Key Sync (Requires

Pitch N Time)

Overview

PITCH PLAY mode: Hold the MODE button and press PAD 5 to select PITCH PLAY mode. This requires

the Serato Pitch ‘n Time DJ expansion pack activated, see the PITCH PLAY section for more

Information.

SCRATCH BANK mode: Hold the MODE button and press PAD 6 to select SCRATCH BANK mode.

Scratch Bank Mode allows you at assign les in your Serato DJ Pro library to a pad. When a pad is

triggered, the le corresponding le will be loaded to deck. See the SCRATCH BANK section for more

information.

LOOP ROLL mode: Hold the MODE button and press PAD 7 to select LOOP ROLL mode. Holding pads

1-8 activates a loop roll of varying sizes. Release the pad to exit the Loop Roll. Use the PARAMETER

buttons to shift the roll position to the left or right. Hold Shift and press the PARAMETER buttons to change

the 8 selected loop size options.

BEAT GRID mode: Hold the MODE button and press PAD 8 to select BEAT GRID mode. In this mode,

PAD 1 is Large Adjust Left, PAD 2 is Small Adjust Left, PAD 3 is Small Adjust Right and PAD 4 is Large

Adjust Right. PAD 5 is Large Slip Left, PAD 6 is Small Slip Left, PAD 7 is Small Slip Right and PAD 8 is

Large Slip Right.

USER mode: Hold the SHIFT button and press the MODE button to select USER mode. In this mode the

pads are blank and available to be user mapped. See the MIDI section for more information.

Performance Pads

Scratch Banks

Holding the MODE button and pressing PAD 6 on the Reloop Ready will enable SCRATCH BANKS. This

mode allows you at assign les in your Serato DJ Pro library to a pad. When a pad is triggered, the le

corresponding le will be loaded to deck. The left set of pads will load to deck 1 where as the right will load

to deck 2.

Click the Scratch Bank button in the top tool bar of Serato DJ Pro to reveal the Scratch Bank Panel.

In this panel you can load and eject les from the Scratch Banks, as well as chose the preferences you wish

to load to the deck upon triggering the pad. These preference include the start point of the le, Key Lock

on/o and Repeat on/o. Clicking the button in the top left corner of the panel will change between

Advanced and Simple View.

Use the PARAMETER buttons to move through SCRATCH BANKS A to D.

Holding SHIFT and clicking on any Scratch Bank pad will unload the currently loaded Scratch Bank le and

re-load the last track to be loaded to that deck.

Hold the and press PAD 5 to select PITCH PLAY mode Holding the MODE button and pressing PAD 5

on the Reloop Ready will enable Pitch Play mode. In this mode you an play Cue Points over variable pitch

ranges.

There are 3 key ranges to choose from. The following tables show pitched key ranges (in Semitones) while

using the 8 performance pads in Pitch Play mode. To toggle between key ranges press the Parameter left &

right buttons.

The root key pad (0) is always lit white, which will play the cue point at it’s regular pitch.

Pressing Parameter left & right while holding SHIFT will shift up or down a single semitone. In Pitch Play

mode, pressing a pad will pitch the currently selected cue point up or down the following ranges:

Up Range: (Up 7 Semitones)

+4 +5 +6 +7

0 +1 +2 +3

Middle Range: (Up 3/Down 4 Semitones

0 +1 +2 +3

-4 -3 -2 -1

Down Range: (Down 7 Semitones)

-3 -2 -1 0

-7 -6 -5 -4

When Pitch Play mode is rst enabled, the middle range is selected. If a new track is loaded, key mode will

default to middle range.

PITCH PLAY can only pitch one Cue point at a time. To change the selected Cue, hold the SHIFT button

and press a performance pad where the cue point you want to select would be (as shown in the CUES

performance pad mode). While holding SHIFT, press the corresponding performance pad for:

Cue 1 Cue 2 Cue 3 Cue 4

Cue 5 Cue 6 Cue 7 Cue 8

The selected cue point defaults to Cue Point 1 on track load, even if instant doubled. If a pad with no cue

point is selected, then a new cue point will be created. Deleting a cue point however, is not possible in

PITCH PLAY mode. Range is remembered if you choose another pad mode, then go back. If a new track is

loaded, the mode will default to middle range.

NOTE: Pitch Play mode is available once the Pitch ‘n Time DJ Expansion Pack has been

activated in the MY SERATO window. Make sure “Enable Pitch ‘n Time DJ” is checked in the

Expansion Pack tab of the SETUP screen.

Pitch Play

Help

Show Tooltips

Click on the button in the upper right-hand corner of Serato DJ Pro, then to enable

tooltips. Tool tips provide a handy way to learn the various features of Serato DJ Pro.

Move the mouse over a section of the screen to bring up a context sensitive tool tip.

Watch Tutorials

Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch

your default internet browser and watch tutorials, to help you get familiar with Serato DJ Pro.

Get Support

Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch your

default internet browser and navigate to the Serato DJ Pro knowledge base, where you can nd helpful

articles and guides on Serato DJ Pro. Alternatively, type in the box, with keywords, to

search the Serato DJ Pro knowledge base for specic, related topics.

MIDI

The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your

primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to

further enhance your performance.

For more information on MIDI mapping with Serato DJ Pro click here

To remap your supported Serato device, open the SETUP screen and click the MIDI tab. If your Serato

device supports hardware remapping, it will show up in the MIDI Devices list at the top.

Select your connected device from the MIDI Devices list and make sure the “Allow Serato Hardware

Remapping” option is checked.

Once checked, the MIDI assign button at the top of the screen will become available for you to start

remapping.

You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking ‘Restore Defaults’

will erase any custom mappings for all connected devices and revert their functions back to default.

Table des matières

Autres manuels Serato Matériel de DJ

Serato

Serato Numark Mixstream Pro + Manuel utilisateur

Serato

Serato Mixars Duo MKII Manuel utilisateur

Serato

Serato RANE SEVENTY-TWO Manuel utilisateur

Serato

Serato Hercules DJControl Starlight Manuel utilisateur

Serato

Serato Rane SEVENTY Manuel utilisateur

Serato

Serato DJ LITE Numark NS4FX Manuel utilisateur

Serato

Serato RANE SEVENTY-TWO mkII Manuel utilisateur

Serato

Serato RELOOP TERMINAL MIX 2 Manuel utilisateur

Serato

Serato DJ Lite Hercules DJ Control Inpulse 500 Manuel utilisateur

Serato

Serato DJ Lite Manuel utilisateur

Serato

Serato Reloop RP-8000 Manuel utilisateur

Serato

Serato Numark Manuel utilisateur

Serato

Serato DJ Pro Pioneer DJ DJM-S5 Manuel utilisateur

Serato

Serato Pioneer DJ DDJ-FLX4 Manuel utilisateur

Serato

Serato Rane ONE Manuel utilisateur

Serato

Serato Reloop Elite Manuel utilisateur

Serato

Serato Reloop Beatmix 2 Manuel utilisateur

Serato

Serato DJ NUMARK NVII Manuel utilisateur

Serato

Serato NUMARK MIXTRACK PRO Manuel utilisateur

Serato

Serato Vestax VCI-380 Manuel utilisateur

Serato

Serato SL2 Manuel utilisateur

Serato

Serato NUMARK MIXTRACK PRO Manuel utilisateur

Serato

Serato VESTAX VCI-400 Manuel utilisateur

Serato

Serato Numark NS4FX Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur