SentexSystems CROWN JEWEL Mode d'emploi

Doc.. 6001141

Doc.. 6001141Doc.. 6001141

Doc.. 6001141

Rev B

Rev BRev B

Rev B

CROWN JEWEL

CROWN JEWELCROWN JEWEL

CROWN JEWEL

ADVANCED FEATURES

ADVANCED FEATURESADVANCED FEATURES

ADVANCED FEATURES

PROGRAMMING GUIDE

PROGRAMMING GUIDEPROGRAMMING GUIDE

PROGRAMMING GUIDE

Rev B Doc. 6001141

TABLE OF CONTENTS

PART 1 PROGRAMMING OVERVIEW .....................................................................................1

A. INTRODUCTION ..........................................................................................................................1

B. PROGRAMMING BASICS ............................................................................................................2

C. SETTING THE DATE AND TIME (STEP 27)................................................................................3

D. SYSTEM RESPONSES................................................................................................................4

PART 2 TIME ZONES AND HOLIDAYS....................................................................................5

A. PROGRAMMING TIME ZONES (STEP 25)..................................................................................5

B. SETTING HOLIDAYS (STEP 28)..................................................................................................5

PART 3 ENTRY CODES............................................................................................................6

A. CREATING AN ENTRY CODE (STEP 03)....................................................................................6

B. DELETING AN ENTRY CODE (STEP 04) ....................................................................................6

C. DELETING ALL ENTRY CODES (STEP 05) ................................................................................6

PART 4 VISITOR CALL FEATURES.........................................................................................7

A. SETTING THE VISITOR CALL DOUBLE RING (STEP 06)..........................................................7

B. SETTING THE MAXIMUM VISITOR CALL RING COUNT (STEP 07)..........................................7

C. SETTING TALK TIME (STEP 08).................................................................................................7

D. ENABLING/DISABLING PULSE DIAL ACTIVATION (STEP 09)...................................................8

E. ENABLING/DISABLING CALL WAITING (STEP 10) ....................................................................8

F. CHANGING THE VISITOR CALL RESPONSE KEYS (STEP 34).................................................8

G. VISITOR CALLS TO GUEST HOUSES........................................................................................8

PART 5 DO NOT DISTURB FEATURE.....................................................................................9

A. ACTIVATING THE DO NOT DISTURB UNTIL FEATURE (STEP 89)...........................................9

B. CANCEL DO NOT DISTURB UNTIL (STEP 89)...........................................................................9

C. SETTING UP A DO NOT DISTURB SCHEDULE (STEP 11)........................................................9

D. DELETING A DO NOT DISTURB SCHEDULE (STEP 11) .........................................................10

E. ENABLING/DISABLING THE DO NOT DISTURB SCHEDULE (STEP 12)................................. 10

PART 6 GATE CONFIGURATION...........................................................................................11

A. SETTING THE MAIN GATE ACTIVATION TIME (STEP 23).......................................................11

B. SETTING AUXILIARY RELAY AND STATUS 2 INPUT CONFIGURATION (STEP 26)..............11

C. SETTING AUXILIARY RELAY ACTIVATION TIME (STEP 24)................................................... 12

PART 7 UNLOCK SCHEDULES .............................................................................................13

A. SETTING AN UNLOCK SCHEDULE FOR THE MAIN GATE (STEP 41)....................................13

B. ERASING AN UNLOCK SCHEDULE FOR THE MAIN GATE (STEP 41)....................................14

C. SETTING AN UNLOCK SCHEDULE FOR THE AUXILIARY RELAY (STEP 42)........................14

D. ERASING AN UNLOCK SCHEDULE FOR THE AUXILIARY RELAY (STEP 42)........................15

E. ENABLING/DISABLING UNLOCK SCHEDULES (STEP 40)...................................................... 15

PART 8 CALL FORWARDING ................................................................................................16

A. SETTING THE CALL FORWARDING NUMBER (STEP 14).......................................................16

B. ENABLING/DISABLING CALL FORWARDING (STEP 13).........................................................16

C. DELETING THE CALL FORWARDING NUMBER (STEP 14) ....................................................16

D. SETTING THE CALL FORWARDING EXTENSION NUMBER (STEP 16 )................................17

E. SETTING THE CALL FORWARDING EXTENSION DELAY (STEP 15).....................................17

F. DISABLE THE CALL FORWARDING EXTENSION DELAY (STEP 15)......................................17

G. MAXIMUM NUMBER OF VOICE MAIL DIGITS VISITOR MAY DIAL (STEP 17)........................17

H. CALL FORWARDING SCHEDULE (STEP 18) ...........................................................................18

Doc. 6001141 Rev B

PART 9 SECURITY FEATURES .............................................................................................19

A. CHANGING THE UNIT PASSWORD (STEP 01)........................................................................19

B. VERIFYING THE UNIT PASSWORD (STEP 02)........................................................................ 19

C. ENABLING/DISABLING ALARM CALL (STEP 21) .....................................................................19

D. ALARM CALL NUMBER (STEP 22)............................................................................................20

E. DELETE ALARM CALL NUMBER (STEP 22).............................................................................20

F. MAXIMUM NUMBER OF KEYPAD ERRORS (STEP 20)............................................................20

G. ENABLING DIRECT COMMANDS (STEP 35)............................................................................20

PART 10 IMMEDIATE CONTROL FUNCTIONS .....................................................................21

A. DO NOT DISTURB UNTIL FEATURE (STEP 89).......................................................................21

B. CANCEL THE DO NOT DISTURB UNTIL FEATURE (STEP 89)................................................21

C. SPEAK THROUGH THE CROWN JEWEL MICROPHONE (STEP 90)......................................21

D. CYCLE MAIN GATE (STEP 91)..................................................................................................21

E. CYCLE AUXILIARY RELAY (STEP 92) ......................................................................................21

F. INITIATING SUSTAINED ACTIVATION OF MAIN RELAY (STEP 93)........................................22

G. INITIATING SUSTAINED ACTIVATION OF AUXILIARY RELAY (STEP 94)..............................22

H. RELEASE MAIN GATE RELAY (STEP 95)................................................................................. 22

I. RELEASE AUXILIARY RELAY (STEP 96)..................................................................................22

J. RELEASE BOTH RELAYS (STEP 97).........................................................................................22

K. LATCH MAIN RELAY UNTIL SPECIFIED TIME (STEP 98)........................................................23

L. LATCH AUXILIARY RELAY UNTIL SPECIFIED TIME (STEP 99)...............................................23

PART 11 OTHER FUNCTIONS ...............................................................................................24

A. SETTING ALTERNATE PREFIXES (STEP 36) .......................................................................... 24

B. RESTORING FACTORY SETTINGS (STEP 31) ........................................................................ 25

C. ENABLING/DISABLING THE NO-TELCO MODE (STEP 33) ..................................................... 25

D. RINGS BEFORE ANSWER (STEP 29).......................................................................................26

E. OVERRIDING TELEPHONE COMPANY ANSWERING SERVICE (STEP 43)...........................26

F. RESETTING THE UNIT (STEP 32).............................................................................................26

PART 12 MULTIPLE UNIT INSTALLATIONS.........................................................................27

A. PROGRAMMING MULTIPLE UNITS ..........................................................................................27

B. SETTING THE UNIT NUMBER (STEP 38).................................................................................27

C. VERIFY UNIT NUMBER (STEP 37)............................................................................................ 28

PART 13 DIRECT COMMANDS FROM THE RESIDENCE PHONE.......................................29

A. DIRECT COMMAND BASICS.....................................................................................................29

B. DO NOT DISTURB UNTIL (STEP 89).........................................................................................29

C. CANCEL DO NOT DISTURB UNTIL (STEP 89)......................................................................... 29

D. INITIATING AUDIO COMMUNICATION THROUGH THE CROWN JEWEL (STEP 90).............29

E. CYCLE MAIN GATE (STEP 91)..................................................................................................30

F. CYCLE AUXILIARY RELAY(STEP 92)........................................................................................30

G. ACTIVATE MAIN RELAY (STEP 93)..........................................................................................30

H. ACTIVATE AUXILIARY RELAY (STEP 94).................................................................................30

I. DEACTIVATING MAIN RELAY (STEP 95)...................................................................................30

J. DEACTIVATING AUXILIARY RELAY (STEP 96).........................................................................30

K. DEACTIVATING BOTH RELAYS (STEP 97).............................................................................. 30

L. ACTIVATING MAIN RELAY UNTIL SPECIFIED TIME (STEP 98)...............................................31

M. ACTIVATING AUXILIARY RELAY UNTIL SPECIFIED TIME (STEP 99)....................................31

N. USING THE IN-HOUSE PAGING FEATURE.............................................................................. 31

APPENDIX A THE PROGRAMMING MENU...........................................................................32

Rev B Doc. 6001141

This document is protected by copyright, and may not be copied or adapted without the prior written

consent of Sentex Systems. This document contains information proprietary to Sentex and such

information may not be distributed without the prior written consent of Sentex. The software and

firmware included in the Sentex Crown Jewel unit as they relate to this documentation are also

protected by copyright and contain information proprietary to Sentex

Sentex Systems

Chatsworth, CA

Visit us at www.sentexsystems.com

Doc. 6001141 Rev B

Rev B Doc. 6001141 Page 1 of 33

PART 1

PROGRAMMING OVERVIEW

A. INTRODUCTION

The Crown Jewel is a single-line telephone entry system that connects directly to your telephone line.

When visitors call you through the Crown Jewel unit, the calls are not routed through the telephone

company. No telephone charges are generated.

The procedures in this manual assume that you have already read the manuals for your Crown Jewel

system (Crown Jewel Installation Guide, Doc. No. 6001145, and Crown Jewel Basic Programming,

Doc. No. 6001146). If not, please read the manuals before continuing.

You can program the following features on your Crown Jewel unit:

Visitor entry: •When the visitor presses the “#” key on your unit’s keypad, the Crown Jewel rings

your telephone.

•You can communicate with the visitor and allow entry at the main gate by dialing 9.

•If the Crown Jewel unit is controlling a second gate, you can dial 5 to allow entry.

Call Waiting: •If your telephone is in use when a visitor calls, the Crown Jewel will notify you. You

can put your current call on hold and speak with the visitor.

•If you are talking with a visitor and you receive a phone call, the Crown Jewel will

notify you. You can put the visitor on hold while you take your new phone call.

•If you forget that a call was on hold and hang up the phone, the Crown Jewel will

ring your telephone. When you pick up the phone, your call will be put through.

Entry Codes: You can grant access through the use of 4-digit entry codes. You can program up

to 75 different entry codes to allow access through the Crown Jewel unit.

Time Zones: You can restrict the use of entry codes by limiting the days and times that a code is

valid.

Call Forwarding: The Crown Jewel unit can be programmed to dial an outside telephone number

(instead of ringing the house) when a visitor presses a “#” key on the front panel of

the unit. This feature allows you to grant access to a visitor from a remote location.

Do Not Disturb The Crown Jewel can block visitor calls during time periods you specify. This

Feature command can either be sent directly to the unit; or you can set up schedules that will

activate and deactivate this feature automatically.

Visitor calling The Crown Jewel can be programmed to have a visitor call placed to a location

directly to a other than the main residence, such as a guest house. The Crown Jewel has the

guest house, etc. capacity for three codes.

Timed control of You can program the Crown Jewel unit to automatically activate, and

gate & auxiliary later deactivate, any device controlled by the unit’s relays. For example, the

relays Crown Jewel can automatically open the main gate up to twice per day and close it

later.

You can also program up to 10 holidays on which these schedules will not operate

unless you want them to.

Direct control of You can activate the controlled gates or accessories can be activated directly

gates from your tone dial telephone.

Off-site remote You can program the Crown Jewel unit from a remote location, such as

programming an outside tone dial telephone, or a personal computer with a modem.

Page 2 of 33 Doc. 6001141 Rev B

Gate monitoring: Your Crown Jewel installer can place sensors on the main gate to detect whether it

is closed. You can program the Crown Jewel to respond in the following ways if the

gate is forced open or is held open 60 seconds after it should have been closed.

1. Place an alarm call: The unit will ring a pre-programmed outside telephone

number and make a continuous “hi-low” sound.

2. Close a relay: If relay 2 is programmed as an alarm relay, the unit will close that

relay to activate the device connected to it. For example, you may have an installer

connect a siren, or Closed Circuit Television Camera.

Free exit through The unit can provide free exit through a controlled entry point.

a monitored gate

Transactions: The Crown Jewel retains a record of the last 250 gate actions and programming

entries, including the time and date of the activity and, in the instance of entry codes

transactions, the person involved. Please ask your installing dealer for details on

how these records may be retrieved via modem.

B. PROGRAMMING BASICS

You can program the Crown Jewel from:

•The keypad mounted on the face plate of the unit

•The residence telephone; you will need a tone-dial telephone

•A remote telephone; you will need to use a tone-dial telephone to call the residence

ENTER PROGRAMMING MODE

Begin by signalling the Crown Jewel unit that you want to enter programming mode.

From The Keypad

1. Press the asterisk key three times (“✱✱✱”).

2. The Crown Jewel is now ready to accept programming instructions.

From the Residence Telephone

1. When you hear the dial tone, press the asterisk key three times (“✱✱✱”).

2. Enter the six digit password. The unit will emit a high-pitched tone.

3. Press the pound key (“#”). The tone will stop.

4. The Crown Jewel is now ready to accept programming isntructions.

From a Remote Telephone

1. Dial the residence telephone number.

2. When the Crown Jewel picks up the call, press the asterisk key three times (“✱✱✱”).

3. Enter the six digit pass word. The unit will emit a high-pitched tone.

4. Press the pound key (“#”). The tone will stop.

5. The Crown Jewel is now ready to accept programming instructions.

Rev B Doc. 6001141 Page 3 of 33

PROGRAMMING THE CROWN JEWEL

Each programming command consists of: the programming prefix (usually “##”); a 2-digit step

number; the required digits of data; ending with the “#”(pound) key to terminate the programming

step. The step number tells the Crown Jewel which setting to change. The data is your new value for

that setting.

If the step and data information are valid, the unit will respond with 2 short beeps. If you do not hear 2

short beeps, the unit did not understand your input.

If you realize in the middle of an entry that you might have made an error, press the “✱” (asterisk) key

to cancel the command. Begin again with the step number.

Example: ##01123456#

Programming prefix: ##

Two-digit step number: 01 – set the unit password

Six-digit data: 123456 – the new password

End step: # - the pound key

EXIT PROGRAMMING MODE

To signal the Crown Jewel that you want to exit programming mode, press “00#” (two zeroes and the

pound key).

Keypad: the unit will disconnect.

Telephone (residence or remote): the unit respond with three short beeps. Hang up the phone.

C. SETTING THE DATE AND TIME (STEP 27)

The Crown Jewel unit contains an internal calendar and clock which is used for:

•Time stamping of transactions

•The Do Not Disturb feature

•Entry codes with time zones

•Gate unlock schedules

•Call Forwarding schedules.

Be sure to set the current date and time before trying to use any of these features.

Format 27 + year + month + date + day of the week + hour + minute + “#”.

•The year, month, date, hour and minute are entered as two digits.

•The hour is entered in twenty-four hour format; for example, the time of 7:20 PM is

entered “1920”; the hour for 7:20 PM is entered “19”; the minutes are entered “20”.

•The days of the week are numbered as follows:

1 = Sunday

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

Example 27 + 94 + 09 + 28 + 4 + 15 + 30 + #

(sets the unit’s clock for 3:30 PM on Wednesday, September 28, 1994).

NOTE: The internal calendar automatically adjusts for leap years, but does not automatically adjust for

daylight savings time.

Page 4 of 33 Doc. 6001141 Rev B

D. SYSTEM RESPONSES

The Crown Jewel emits various audio tones or beeps to respond to input or to indicate certain

conditions. These tones and beeps will tell whether the Crown Jewel has understood your

programming instructions or Direct Commands.

Programming Responses:

•2 short beeps - a programming step was valid

•3 short beeps - the programming mode was exited

•1 long beep - an input was not valid

•2 long beeps - a duplicate entry code was entered

•3 long beeps - the code memory is full

•4 long beeps - the unit has reset or is powering up

•busy signal - the line is busy or Do Not Disturb feature is in effect

Direct Command Responses:

•5 short beeps - a gate is closing by command

•10 short beeps - a gate is opening by command

Other Responses

•1 short beep - a key was pressed on the main keypad

•10 beeps (1 per second) - the talk time for a visitor call is lapsing and the unit will beep once per

second for the last 10 seconds unless the talk time is extended.

•ring back - the unit is ringing the house

•continuous hi-low tones - an alarm condition has been activated

silence the keypad has struck out; the unit is being programmed from another source; or an alarm

condition exists

Autres manuels pour CROWN JEWEL

Table des matières

Autres manuels SentexSystems Système d'interphone

SentexSystems

SentexSystems HORIZON Manuel utilisateur

SentexSystems

SentexSystems CROWN JEWEL Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur