4
www.sensocon.com
LIMITED WARRANTY
SENSOCON warrants its products to be free from defects in materials and workmanship for a period of
one (1) year from the date of shipment, subject to the following terms and conditions: Without charge,
SENSOCON will repair, replace, or refund the purchase price at SENSOCON’s option products found to
be defective in materials or workmanship within the warranty period; provided that:
i. the product has not been subjected to abuse, neglect, accident, incorrect wiring not our own, improp-
er installation or servicing, or use in violation of labels or instructions provided by SENSOCON;
ii. the product has not been repaired or altered by anyone except SENSOCON;
iii. the maximum ratings label and serial number or date code have not been removed, defaced, or
otherwise changed;
iv. examination discloses, in the judgment of SENSOCON, the defect in materials or workmanship
developed under normal installation, use and service; and
v. SENSOCON is notified in advance of and the product is returned to SENSOCON transportation
prepaid before expiration of the warranty period.
THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER REPRESENTA-
TIONS MADE BY ADVERTISEMENTS OR BY AGENTS AND ALL OTHER WARRANTIES, BOTH
EXPRESS AND IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABLILTY OR OF
FITNESS FOR A PARTICULAR PURPOSE FOR GOODS COVERED HEREUNDER.
Mounting Options
1. With hooks facing upwards, use 3/8” hex self-drilling screws provided to mount the bracket to the
preferred location.
2. Place the holes located in the back of the unit over the bracket hooks. The interlocking strips will
not interfere with the mounting, as they fit within the groove of the bracket.
3. Gently pull the unit down onto the hooks until it clicks into place.
Bracket Mounting
Interlocking Strip Mounting
1. Remove the plastic backing of both interlocking strips so that the adhesive sides are exposed. (Do
not detach the interlocking strips)
2. With the interlocking strips still attached to the SiREn™, press the adhesive sides firmly to the
prefered mounting surface.
3. Should the SiREn™ need to be temporarily removed, detach one side of the strips from the other
and later reattach in a similar fashion.
ON
l2 3
ON
l2 3
