10
USING YOUR MINI FOOD CHOPPER
1. Place the appliance with the non-slip feet base
cover on the base of the bowl on a stable, clean,
dry and level surface.
2. Place the chopping blades into the bowl. Place
the blade with the larger blade stem onto the
central pin inside the bowl first, then followed by
the smaller blade attachment. NEVER TOUCH THE
BLADE - always insert and remove the chopping
blades by using the white blade stem.
3. Always cut the food to be processed into uniform
pieces no larger than 2.5cm.
4. Distribute the food evenly around the chopping
blade for even results.
5. Place the bowl lid onto the bowl. Rotate the lid
anticlockwise until lid will not rotate any further.
6. Plug the motor unit into the mains socket.
7. Press and hold the Operating Switch for 3 to 5
seconds and then release; the motor will stop.
Press and quickly release for a finer consistency. Do
not fill the chopping bowl above the 600ml when
liquid ingredients are being processed.
8. When the desired result is achieved, release the
Operating Switch and the appliance will shut o.
9. Unplug the mains cord from the mains socket.
10. Remove the motor unit up and o the lid.
11. Rotate the bowl lid clockwise to remove the lid and
empty the processed food from the bowl. Use a
spatula to make removing processed food easier
11
TIPS FOR YOUR MINI FOOD CHOPPER
1. For better control, process food by pressing the
Operating Switch briefly. Be careful not to over-
process. Most foods require only 3 to 8 seconds to
process.
2. Regularly check the consistency of processed
ingredients during use and continue if required
until the desired result is achieved.
3. For better results, process only small amounts of
food at a time.
4. To make bread crumbs, tear bread into pieces
before processing. Similarly, break biscuits into
pieces before processing to make crumbs for use in
a cheesecake base.
5. Before processing make sure the bowl, lid and
chopping blades are completely dry.
6. To chop carrots, celery, mushrooms, green peppers,
or onions, cut into 2.5cm chunks before processing
for more uniform consistency.
7. Do not process raw meat.
8. Some ingredients such as coee beans, baking
chocolate, or whole or hard spices may damage
the plastic parts and are not recommended to be
processed by the appliance.
9. For on even chopped result, you should scrape
the sides of the bowl down using a spatula and
continue processing. This should only be done
after the appliance has been switched o and
unplugged.
10. Do not fill the chopping bowl past the 600ml line.
If larger quantities are desired, process in several
small batches.
