Senovo D100 Manuel utilisateur
The Senovo D100 alerts cyclist about rear
vehicle moving at closing speed aboveapproaching .predefined threshold
move your eyes awayneed tono,intuitiveD100 isThe
from the road, no screens and no interpretations, just seat
vibration and beep.
Power switch modes:
Right - Vibration + Beep
Middle –Off
Left - Vibration only
Properties:
Detects vehicles up to 120m
LCO algorithm for reducing false alarms
Seat vibration warning
Optional beeping warning
Fast flashing warning
Rechargeable battery - micro B USB port
Input: DC 5V
Installation:
1. Take the seat adapter and mount it to your bicycle
seat using the supplied Allen bolts.
2. Insert the D100 ears into the seat adapter and
tighten the hinge screw *, confirm D-100 is vertical
oriented.
*The hinge screw can be easily replaced by a standard M5 screw .
Our adapter fits most bicycle seats, in the unlikely event that adapter do
not fit, don’t worry there are many adapters in the market .
In case you did not find a solution, please contact us at
The D100 should be vertical oriented, do not tilt it up or down .
Rear wheel must not block D100 line of sight, at least 15cm gap above
rear wheel.
The battery charged by a standard USB (micro B type) and standard
transformer (not provided in the kit). During charging, a green light turns
on in front of the product, at the end of charging the green light turns off.
R & D and production by Senovo Ltd.
5 Hapardes St, Beer Tuvia. ISRAEL
www.senovos.com
Warning:
SENOVO D100 alerts are recommendation only, do not trust D100 and use it only
to improve your situational awareness. D100 can miss true dangerous situations
and create false alarms. Always maintain awareness of your surroundings and
operate the bicycle in a safe manner. Failure to do so could result in serious injury
or death.
Table des matières
