Sennco Solutions 150001 Manuel utilisateur
Prepared by KM 11/2015 1 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
Instrucons for Wireless Security System
Power & Alarm Soluon
(Code 120-001) Rev 4
Prepared by KM 11/2015 2 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
Nocaons
Any changes/modicaons to this equipment not approved by Sennco Soluons Inc. could void the user’s
authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS standard(s). Operaon is subject to the
following two condions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitaon est autorisée aux deux condions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est suscepble d'en compromere le fonconnement.
Patents:
Patent No.: US 8,279,077 B1
Patent No.: US 8,558,714 B1
Sennco Soluons, Inc. is not held liable for any rmware or soware changes implemented by the displayed
product’s manufacturer, distributor, or reseller.
Component Model FCC ID IC ID
Main alarm/Snier Model: 150001 COI-150001 20574-150001
Sensor head Model: 150003 COI-150003 20574-150003
Bubble maker Model: 150005 COI-150005 20574-150005
Prepared by KM 11/2015 3 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
Table of Contents
I. Parts List (What does it come with?)
A. Main alarm……………………………………………………………………………..……. Page 4
B. Bubble maker……………………………………………………………………………….. Page 4
C. Sensor head…………………………………………………………………….……………. Page 4
D. Snier……………………………………………………………………………..……………. Page 4
E. Cradle………………………………………………………………………..…………………. Page 5
F. Gateway…………………………………………………………………………………..…… Page 5
II. Descripon of Alarm (What is this part?)
A. Main alarm…………………………………………………………………………..………. Page 6
B. Bubble maker……………………………………………………………………………..… Page 7
C. Sensor head…………………………………………………………………………….……. Page 7
D. Snier……………………………………………………………………………..……………. Page 8
E. Cradle…………………………………………………………………………….…………….. Page 8
F. Gateway………………………………………………………………………………….……. Page 9
III. Set Up (Where do I put these?)
A. Cradles………………………………………………………………..……………………… Page 10
B. Main alarm………………………………………………………………………...………. Page 12
C. Snier……………………………………………..………………………………….………. Page 12
D. Gateway………………………………………………………………………………..……. Page 12
E. Bubble makers…………………………………………………….……………………… Page 13
F. Sensor heads……………………………………..……………………………………….. Page 14
G. Connecng sensor heads to cordwinder cables.…………………………. Page 15
H. Disconnecng sensor heads from cordwinder cables……………….... Page 15
IV. Teaching DaKeys (How do I program the DaKey?)
A. Teaching the rst DaKey………………………………………………….………….. Page 16
B. Teaching addional DaKeys……………………………………………….….……. Page 16
V. Conguring the System (How do I program the alarm?)……………..…………..…. Page 17
VI. Sensor Head Alarm…………………………………………………………………………………….. Page 18
VII. Silencing the Main Alarm (How do I make it stop?)…………………………………….. Page 18
VIII. Points of Sensing
A. Micro USB power cable……………………………………………………..……….. Page 19
B. Sensor head plunger…………………………………..………………………………. Page 19
C. Sensor head proximity………………………………………………………………… Page 19
IX. Hard Reset (How do I reset it?)…………………………………………………………………... Page 19
Prepared by KM 11/2015 4 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
I. Parts List
DaKeyMain alarm unit AC power cable for main alarm
A. Main alarm
Bubble maker AC power cable for bubbler maker
B. Bubble maker
Snier AC power cable for Snier
D. Snier
C. Sensor head
Sensor head shieldingSensor head Sensor head adhesive WPWR cable
Key
Prepared by KM 11/2015 5 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
E. Cradle
Cordwinder 7 Adhesive for Cordwinder 7
F. Gateway
Cradle mounng plateCradle AC power cableBolts with T nuts
Gateway AC power cableGateway antennas
WLAN
3G/GPRS
Prepared by KM 11/2015 6 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
II. Descripon of Alarm
Buon
LCD
DIP switches
Antenna
AC power port
DaKey port
A. Main alarm
Prepared by KM 11/2015 7 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
Antenna
AC ower port
Plunger switch
B. Bubble maker
DIP switches
Antenna (internal)
Arrow (all bubble makers must
face the same direcon)
C. Sensor head
Micro USB
charging port
Cordwinder cable end
port
Charging
contacts
Prepared by KM 11/2015 8 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
Antenna
AC ower port
Plunger switch
D. Snier
Antenna
AC power port
E. Cradle
Charging
contacts
AC power port
USBA cable
Prepared by KM 11/2015 9 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
F. Gateway
USB port
WLAN antenna
port (taller)
3G/GPRS antenna
port (shorter)
AC power port
Prepared by KM 11/2015 10 Patent pending
14407 Coil Plus Dr, Unit A | Plaineld, IL 60544
www.sennco.com | techsupport@sennco.com
815.577.3400 | Toll free 866.736.6261
Mon - Fri 9AM - 5PM CST
III. Set Up
1. Insert bolts through holes in cradle mounng plate. Thread a T nut onto each bolt.
2. Place cradle mounng plate into posion on the xture. The T nuts should be turned to allow them to t through the track. Make sure that
the large opening in the cradle mounng plate is at the top le.
3. From underneath the xture, turn the T nuts perpendicular to the track so they will no longer pass through it.
4. While holding the T nuts in place, use a screwdriver to turn the bolts clockwise unl ghtened down.
5. The slot in the center post of the cradle mounng plate should be open at the top and the large opening in the cradle mounng plate should
be at the top le.
6. Find the cordwinder. Clean the top of the cordwinder box where the cable exits using an alcohol wipe. Dry it with a clean cloth.
7. Peel the backing o of the cordwinder mounng adhesive and secure the adhesive to the cordwinder. Press rmly for about 15 seconds for
a strong adhesive bond.
8. Using an alcohol wipe, clean the area underneath the xture where the cordwinder will be placed. Dry with a clean cloth.
9. Peel the backing o of the top of the adhesive and secure the cordwinder to the underside of the xture so that the cable is centered in the
cradle mounng plate. Press rmly for about 15 seconds for a strong adhesive bond.
A. Cradles
Ce manuel convient aux modèles suivants
2
Table des matières
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur