Senco FramePro 751XP Manuel utilisateur

Applications:

For framing, truss building, subﬂooring , sheathing, decking,

wood-to-concrete block, siding, fencing, pallets and crate assembly

Features and Beneﬁts:

Tool Speciﬁcations:

Power 1034 in/lbs

Item# 2J0103N Sequential

Weight: 8.4 lbs (3.8 kg)

Height: 14¼"(361.95 mm)

Length: 15" (381 mm)

Nail Capacity: 56-80, depending on gauge

Reg. Operating Pressure: 70 –120 psig

Mode of Operation: Available with either Restrictive Trigger or

Dual Action activating mechanisms.

Fastener Speciﬁcations:

FramePro 751XP nailer drives 2" to 3 1⁄2" smooth shank

nails (Sencote ®or plain); 2" to 3" ring-shank nails; 3" screw-shank

and clipped“D” head nails. Shank diameters include .113", .120"

and .131".

FramePro®751XP

XtremePro™ 3½" Framing/Sheathing Nailer

The FramePro®751XP nailers are designed with the Pro in mind.

XtremePro models have improved internal and external features for

improved durability and comfort. These compact framers are easy to

handle, and easy on the arm. The 30˚ short, in-line magazine, provides

excellent maneuverability and line of sight. These powerful framers drive

a wide range of fasteners in four gauges (.113 – .148) from 2" to 3½" to

handle virtually any job.

• Upgraded XtremePro internal features include: anodized sleeve for

additional strength and durability; urethane sleeve cap protects

sleeve from wear; fixed firing valve improves tool life and speed;

and positive stop guide body aligns nail and driver for consistent

drive

• Comfort and convenience features include: overmold grip and

trigger, 360° adjustable exhaust, rafter hanger and construction

ruler

• Aggressive sawtooth safety that really digs in for toenailing

• Straight-line 30° magazine for better line of sight and simple

two-step loading

• Last nail lock out – prevents dry firing

360° Adjustable Exhaust

Ergonomic Design –

Superb balance for use all day

Aggressive Toenail Safety –

Teeth grip studs with real bite for precise

positioning

Dry Fire Lockout –

Prevents dry ﬁring,

missed operations and

signals when to reload

In-line Magazine –

Better line of sight for

right and left handers

improves balance and

reduces fatigue

Overmold Trigger –

Construction Ruler –

For quick measurements

Full Comfort Overmold Grip –

Resilient grip reduces fatigue

Rear Two-Step

Loading –

Quick and easy for

right or left handers

FramePro 751XP provides 15% more

power than the FramePro 701XP

Rafter Hanger

EZ-Clear Mechanism –

Minimizes time freeing

jammed nails

No-Mar Pad –

Protects work surface

FramePro®751XP

XtremePro™ 3½" Framing/Sheathing Nailer

Always read the Operators Manual and Safety Instructions with all tools to ensure

proper use and safety precautions. For additional information on trigger systems and

how SENCO will save you time, reduce costs, and increase quality, call our toll-free

Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor

or visit our web site at: www.senco.com

5-Year Limited

Warranty –

XP Durability

Thumb Wheel Adjustable

Depth-of-Drive –

Drives nails to a consistent

and controllable depth

Choose the right trigger system for your specific needs!

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in

the following a sequence - depress the safety element at the nose of tool against the work

surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool

off the work surface before starting the sequence again. This trigger is recommended and

acceptable for most applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire) operates in

the following sequence- pull the trigger first and keep the trigger pulled while moving the

tool along the work surface with a bouncing motion, depressing the safety element at the

nose of the tool against the work surface where the fastener is to be driven. This trigger is

recommended for use by trained professionals only in high production or volume

applications.

Autres manuels Senco Cloueuse

Senco

Senco SFN40 Manuel utilisateur

Senco

Senco LS Manuel utilisateur

Senco

Senco 100mm nailer SN70 Manuel

Senco

Senco FramePro 752XP Manuel utilisateur

Senco

Senco XtremePro SCN60XP Manuel utilisateur

Senco

Senco SKSXP Manuel utilisateur

Senco

Senco SLS20XP Manuel utilisateur

Senco

Senco A900FN Manuel utilisateur

Senco

Senco SN1302 Manuel utilisateur

Senco

Senco FinishPro 32 Manuel utilisateur

Senco

Senco AirFree 25 Manuel utilisateur

Senco

Senco SCN40DW Manuel utilisateur

Senco

Senco FramePro 701E-XP / Manuel utilisateur

Senco

Senco FramePro 750XL Manuel utilisateur

Senco

Senco SCN125 Guide d'application

Senco

Senco DFP Manuel utilisateur

Senco

Senco SN60 Manuel utilisateur

Senco

Senco FINISHPRO 10 Manuel utilisateur

Senco

Senco Nailer SLP20XP Manuel utilisateur

Senco

Senco 41 Manuel utilisateur

Senco

Senco RoofPro 445XP Manuel utilisateur

Senco

Senco PalletPro57 Manuel utilisateur

Senco

Senco FramePro 601 Manuel utilisateur

Senco

Senco FinishPro 32 Manuel utilisateur

Manuels Cloueuse populaires d'autres marques

Performance Tool

Performance Tool M643 Manuel utilisateur

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Manuel utilisateur

Parkside

Parkside PET 25 B1 Manuel utilisateur

Grizzly

Grizzly G1847 Manuel utilisateur

Ryobi

Ryobi R18N18G Manuel utilisateur

Black & Decker

Black & Decker 492848-00 Manuel utilisateur

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Manuel utilisateur

Metabo HPT

Metabo HPT NR 3690DC Mode d’emploi

Surtek

Surtek CN650 Dimensions et guide d'installation

Makita

Makita GF600 Manuel utilisateur

Parkside

Parkside PET 25 B1 Manuel utilisateur

Freeman

Freeman P50LSLW Manuel utilisateur

Aicon PRO

Aicon PRO DAC4507 Manuel utilisateur

DAJ

DAJ XR150A Manuel utilisateur

Makita

Makita AN923 Manuel utilisateur

Grizzly

Grizzly T20644 Manuel utilisateur

Black & Decker

Black & Decker 90514937 Manuel utilisateur

Alfamacchine

Alfamacchine Minigraf 4 Manuel