Senco FinishPro 35 Manuel utilisateur

Fastening Solutions™

The only way to work.®

Safety First.

FinishPro®

15 Gauge Angled Finish Nailer

The FinishPro 35 angled ﬁnish nailer’s lightweight, well-balanced

construction enables the users to work all day by reducing fatigue and

increasing productivity. The FinishPro 35 drives 1-1/4" to 2-1/2" ﬁnish

nails for maximum versatility.

Applications:

Cabinets, interior trim, bookshelves, door casements, crown molding,

chair rails, exterior trim

Features and Beneﬁts:

• Adjustable depth-of-drive

• Adjustable exhaust

• Easy-clear latch to clear jams fast

• Full soft grip – for comfort and control

• No-mar pad – to protect work materials

• Available in dual action or restrictive ﬁre

• One-year warranty

• Includes case, ﬁtting, oil, and fastener rebate

Tool Speciﬁcations:

Tool Weight: 4.7 lbs (2.1 kg)

Height: 11.9" (302 mm)

Length: 13.4" (340 mm)

Nail Capacity: 110

Reg. Operating Pressure: 70-120 psig

Mode of Operation: Available with either Dual Action or

Restrictive Trigger activating mechanisms

Fastener Speciﬁcations:

Gauge: 15

Fastener Range: 1-1/4" – 2-1/2"

Finish: Bright Basic/Galvanized

The only way to work.®

Safety First.

Fastening Solutions™

FinishPro®

15 Gauge Angled Finish Nailer

Adjustable

Depth-of-Drive

Drives nails to a

consistent and

controllable depth

No-Mar Pad

Protects woodwork

Angled Magazine

For tight spaces

Easy-Clear Guide Body

To clear jams fast

Soft Grip

Reduces fatigue,

increases productivity

Adjustable Exhaust

Quiet design No-Mar Bumper

Protects work surface

Always read the Operators Manual and Safety Instructions with all tools to ensure

proper use and safety precautions or contact SENCO for more information on our

trigger systems. Choose the right trigger system for your specific needs!

For additional information on how SENCO Fastening Solutions will save you time,

reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to

find your nearest Authorized Senco Dealer or Distributor.

Visit our web site at: www.senco.com

Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates

in the following a sequence - depress the safety element at the nose of tool against the

work surface then pull the trigger. After each fastener is driven, release the trigger and

lift the tool off the work surface before starting the sequence again. This trigger is

recommended and acceptable for most applications.

Contact Actuation Trigger (also known as dual action, bounce or bottom fire)

operates in the following sequence- pull the trigger first and keep the trigger pulled

while moving the tool along the work surface with a bouncing motion, depressing the

safety element at the nose of the tool against the work surface where the fastener is to

be driven. This trigger is recommended for use by trained professionals only in high

production or volume applications.

Autres manuels Senco Cloueuse

Senco

Senco SFN40 Manuel utilisateur

Senco

Senco SCN40DW Manuel utilisateur

Senco

Senco FinishPro XtremePro 25 XP Manuel utilisateur

Senco

Senco GT90CH Manuel utilisateur

Senco

Senco FramePro 652 Manuel utilisateur

Senco

Senco Nailer SLP20XP Manuel utilisateur

Senco

Senco SPBN18XP Manuel utilisateur

Senco

Senco GT90FRH Manuel utilisateur

Senco

Senco Frame Pro 0961 Manuel utilisateur

Senco

Senco SN325+ Manuel utilisateur

Senco

Senco AirFree 32 Manuel utilisateur

Senco

Senco FramePro 651 Manuel utilisateur

Senco

Senco 100mm nailer SN70 Manuel utilisateur

Senco

Senco SFN30 Manuel utilisateur

Senco

Senco XtremePro SCN60XP Manuel utilisateur

Senco

Senco 100mm nailer SN70 Manuel

Senco

Senco F-16A Manuel utilisateur

Senco

Senco SFN2 Manuel utilisateur

Senco

Senco JoistPro 150MXP Manuel utilisateur

Senco

Senco FramePro 701E-XP / Manuel utilisateur

Senco

Senco Brad Nailer SLP20 Manuel utilisateur

Senco

Senco Cordless Finish 25 Manuel utilisateur

Senco

Senco FinishPro 32 Manuel utilisateur

Senco

Senco RoofPro 450 Manuel utilisateur

Manuels Cloueuse populaires d'autres marques

Performance Tool

Performance Tool M643 Manuel utilisateur

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Manuel utilisateur

Parkside

Parkside PET 25 B1 Manuel utilisateur

Grizzly

Grizzly G1847 Manuel utilisateur

Ryobi

Ryobi R18N18G Manuel utilisateur

Black & Decker

Black & Decker 492848-00 Manuel utilisateur

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Manuel utilisateur

Metabo HPT

Metabo HPT NR 3690DC Mode d’emploi

Surtek

Surtek CN650 Dimensions et guide d'installation

Makita

Makita GF600 Manuel utilisateur

Parkside

Parkside PET 25 B1 Manuel utilisateur

Freeman

Freeman P50LSLW Manuel utilisateur

Aicon PRO

Aicon PRO DAC4507 Manuel utilisateur

DAJ

DAJ XR150A Manuel utilisateur

Makita

Makita AN923 Manuel utilisateur

Grizzly

Grizzly T20644 Manuel utilisateur

Black & Decker

Black & Decker 90514937 Manuel utilisateur

Alfamacchine

Alfamacchine Minigraf 4 Manuel