3 INSTALLING THE 10R ON YOUR HELMET
To securely install the main unit of the 10R, you can use the velcro pad or double sided adhesive tape. Please follow the
procedure below.
1. Peel off the cover of the adhesive tape of the velcro pad and attach it on the back plate of the main unit.
2. Locate a suitable surface on your helmet to attach the unit, clean the location with a moistened towel, and allow to dry
thoroughly.
3. Peel off the cover of the adhesive tape on the velcro pad and attach the pad on the left side of your helmet.
4. Attach the main unit to the velcro pad of your helmet.
5. You can also use double sided adhesive tape. Peel off the cover of the double sided adhesive tape and attach it to
the back plate of the main unit. Then do the step 2 and peel off the other side cover of the adhesive tape and attach
the main unit on the left side of your helmet.
6. Place the speakers in the helmet along with the velcro pads, centered to your ear, in the ear pockets of the helmet. If
the helmet has deep ear pockets, you can use the speaker pads to place the speakers closer to your ears. Attach the
speaker connector to the 4 pin connector of the main unit cable.
7. There are two types of microphone that can be installed in your helmet. In the case of the attachable boom
microphone, place the velcro end of the boom microphone between the internal helmet cheek pad and the internal
wall of the helmet shell and attach the microphone connector to the 2 pin connector of the main unit cable. The boom
microphone should be mounted so it is positioned close to your mouth when you are wearing the helmet. In the case
of the wired microphone, attach the velcro pad for the wired microphone to the inside of the chin guard for full-face
helmets. Place the wired microphone on the velcro pad and attach the microphone connector to the 2 pin connector
of the main unit cable.
8. Attach the double sided tape to the battery pack holder in the same manner as the main unit. Insert the battery pack
down in the battery pack holder until you feel the click that signals a secure attachment. Attach the battery connector
메모 [2]: 스피커는 좌,우
분리되었음. 변경요
