SEM Evolution Z-7787 Manuel utilisateur

CONTENTS

IMPORTANT SAFETY & NOTICE

............................................................................................... E-1

SYSTEM BASICS

Location of Controls - Main Unit .......................................... E-2

Location of Controls - Remote .............................................. E-3

Power Supply AC Operation .................................................. E-3

Preparation of Remote Control .............................................. E-3

DIGITAL CLOCK

How to Set Correct Time........................................................ E-4

Automatic Power on/off Timer Function................................ E-5

GENERAL FUNCTION

Snooze Function .................................................................... E-6

Mute Function ........................................................................ E-6

Automatic Power off Sleep Function ..................................... E-6

Electronic Volume Control ..................................................... E-6

Music Equalizer ..................................................................... E-6

Text Display Mode................................................................. E-7

Play Mode Function ............................................................... E-7

Using the Audio Line in Connection ...................................... E-7

RADIO

Operation of Radio ................................................................ E-8

Manual Frequency Adjustment............................................... E-8

Automatic Frequency Adjustment .......................................... E-8

Radio Memory........................................................................ E-8

CD AUDIO

Insertion & Removal of Compact Discs ................................ E-9

Normal CD Operation ............................................................ E-9

Programming the CD-Play ..................................................... E-9

Programming for Regular CD-Audio Discs............................ E-10

CD-MP3

Programming for CD-MP3..................................................... E-11

What is MP3?......................................................................... E-12

How to Play CD-MP3 Discs................................................... E-12

USB & SD CARD

Folders on MP3-CD Discs...................................................... E-13

USB-Drive & SD-Card MP3 Playback................................... E-13

iPod OPERATION

Preparation of iPod Dock ....................................................... E-14

Operation with the iPod.......................................................... E-14

ENCODING FUNCTION

Recording to MP3 File ........................................................... E-15

Encoding from AUX-in .......................................................... E-16

SPECIFICATIONS & SET UP

Speciﬁcations ........................................................................ E-17

Set up Procedure..................................................................... E-17

Connection of Speaker Boxes................................................. E-17

WALL MOUNT SET UP

Wall Mount Set up.................................................................. E-18

E-1

IMPORTANT SAFETY & NOTICE

The lightning ﬂash and arrowhead within the triangle is a warning sign alerting you of “dangerous

voltage” inside the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable

parts inside. Refer servicing to qualiﬁed service personnel.

CAUTION:

The exclamation point within the triangle is a warning sign alerting you of important instructions

accompanying the product.

Grounding or polarization. The precautions should be taken so that the wider blade of the AC plug

must match the slot in receptacle “wall socket”.

Do not expose to dripping or splashing liquids!

Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.

WARNING:

To reduce the risk of ﬁre or electric shock, do not expose this appliance to dripping or splashing liquids.

NOTE:

Caution symbols are printed on rear of unit. Please refer to instruction manual.

PLEASE NOTE:

You will ﬁnd the caution rating label for this product located on the rear of the unit.

To ensure safe use of this product, please follow the advice below:

1. The apparatus and its accessory AC power adaptor should not be exposed to dripping or splashing, liquids

and no objects containers with liquids should be placed on the apparatus.

2. The on/ standby key does not isolate the product from the power supply. To completely disconnect the

product from the mains power supply you must unplug the power cord by pulling out the plug (do not

pull the cord as this may damage it and create a risk of electric shock).

3. The mains plug should not be obstructed and should be easily accessible during use.

4. Under the inﬂuence of electrostatic phenomenon, the product may malfunction and power will need to be

reset.

5. Excessive sound pressure from earphones and headphones can cause hearing loss.

6. Danger of explosion if battery is incorrectly installed. Replace only with the same or equivalent type.

7. When electrostatic discharge (ESD) occurs at the front surface (whether metal or plastic) or near any

part or any button of this unit, or at the USB port and/ or SD-card slots, there may be a possibility that

the product may stop operating and/ or shut down immediately. This is a normal condition and intended

to protect the unit and internal components against damage. In such a case, please reset the unit (by

disconnecting and reconnecting the AC-power source) to revert the unit to normal operation.

E-2

SYSTEM BASICS

LOCATION OF CONTROLS - MAIN UNIT

1. USB / SD COMPARTMENT DOOR

2. USB SOCKET

3. SD CARD SOCKET

4. BLUE BACKLIT DISPLAY

5. CD DOOR

6. STAND (FOR UNIT)

7. PLAY/ PAUSE / FM STEREO KEY

8. STOP / BAND / CLOCK SET KEY

9. VOLUME - DOWN KEY

10. VOLUME + UP KEY

11. FUNCTION KEY

12. MEM. (MEMORY) / PROG. (PROGRAM) /

P-MODE (PLAY MODE)/SLEEP KEY

13. MEM. UP / FOLDER / +10 KEY

14. BACK / TUNE DOWN KEY

15. NEXT / TUNE UP KEY

16. EQUALIZER/REC KEY

17. CD DOOR OPEN / CLOSE KEY

18. REMOTE CONTROL SENSOR

19. ON / STANDBY KEY

20. SPEAKERS (LEFT & RIGHT)

21. AMBIENT LIGHTING (ON SPEAKERS)

22. STANDS (FOR SPEAKERS)

23. HEADPHONES SOCKET

24. SUBWOOFER INPUT SOCKET

25. FM ANTENNA WIRE

26. AM-ANTENNA SOCKET

27. LEFT SPEAKER SOCKET

28. RIGHT SPEAKER SOCKET

29. DC JACK (DC 15V )

30. AUX INPUT SOCKET

31. AM ANTENNA LOOP

32. iPod DOCKING PLATFORM INPUT

SOCKET (UNDERNEATH OF UNIT)

33. POWER AND AUDIO SOURCE

INDICATOR LIGHTING

34. DOCK ADAPTOR FOR iPod

(SEVERAL DIFFERENT ADAPTORS ARE

PROVIDED)

35. STAND (FOR iPod DOCKING PLATFORM)

36. CAVITY FOR DOCK ADAPTOR

37. iPod DOCKING PLATFORM CONNECTOR

789

14 15 16 17

CONTROL KEYS

(ENLARGE SIZE):

18 19

E-3

SYSTEM BASICS

LOCATION OF CONTROLS - REMOTE

1. On/ Standby key

2. Open/ Close key

3. id3 key

4. Display key

5. Time/ Snooze key

6. EQ/ REC key

7. FUNC (Function) key

8. Band Key

9. Sleep key

10. Mem +/ Folder +/ Skip +10 key

11. Mem -/ Folder -/ Skip -10 key

12. Number keys

13. Mute key

14. Mem (Memory)/ Prog. (Program)/

P-mode (Play mode) key

15. Play/ Pause/ Mono/ Stereo key

16. Stop/ Clock set key

17. Back/ Tune down key

18. Next/ Tune Up key

19. Volume down - key

20. Volume up + key

21. Battery compartment

POWER SUPPLY AC OPERATION (EXTERNALAC-DC POWER ADAPTOR)

- This set is equipped with a “DC-Jack” capable of acceptingAC-adaptors

with a rating of DC = 15V, 3A, and with a plug with the following

polarities as shown (center positive) :

- Please use only the supplied AC-adaptor to operate the unit.

Use of other adaptors may damage the unit or cause it to malfunction.

- Plug the tail end of the AC-adaptor into the DC-jack (socket) on the side of the main unit.

- Insert the plug the AC-adaptor into the wall AC socket.

- Press the “ON/ STANDBY” key to switch on the unit.

- This unit is designed to operate without ever being totally powered “OFF”.

It will either be “on” or in “standby mode”.

- In standby mode, the blue back-light of the digital display will be dimmed but the display

will show the current time (clock function).

- Anytime during standby mode, you can switch “on” the unit by pressing the “ON/

STANDBY” key (on remote control or front panel of the main unit).

- Save energy by switching the system to “standby” mode.

PREPARATION OF REMOTE CONTROL

- Remove (gently pull out) the plastic “tab” from the battery compartment at the rear of the

remote control.

- Test the remote control by pressing the (ON/ STANDBY) key to check that the unit

switches on properly using the remote control.

13 14

E-4

DIGITAL CLOCK

HOW TO SET CORRECT TIME

- The set has a built-in digital clock, which is displayed in 2 situations:

(1)When the set is in “standby mode”. (the display will automatically always show the

current time).

(2)When the set is in “on mode” (the blue light of the display is “ON” in this mode, to

indicate that the set is powered “on”). In this situation the LCD display normally does

not automatically show the current time. But you can press the “DISPLAY” key (on

remote control) at any time to see the current time. And press again to switch back the

display to the play information.

Switch unit to “Stand-by” mode (display light = DIMMED)

Press & hold CLOCK SET for 3 seconds

Display shows 12 hour or 24 hour (ﬂashing)

Press (NEXT) or (BACK) to select 12-hour or 24-hour clock

display system & press CLOCK SET to conﬁrm your selection

Press (NEXT) or (BACK) repeatedly to set the correct hour

in the display & press CLOCK SET to conﬁrm

Press (NEXT) or (BACK) repeatedly to set the correct

Minute in the display & press CLOCK SET to conﬁrm

Correct time is now set & will be shown in the display.

*IMPORTANT: During the time setting procedure, whenever any part of the display

is FLASHING (HH or MM) it means that the set is waiting for you to adjust the time.

However if no key is pressed within 5 seconds, the set will return to its normal

(previous) operating mode.

E-5

DIGITAL CLOCK

AUTOMATIC POWER ON/OFF TIMER FUNCTION

- This set has a timer function to enable you to program the unit to automatically switch

“ON” or “OFF” at preset times. This is useful as a morning alarm clock :

Note:

- This timer function only works after the clock has been set.

- The TIMER key is only on the remote control.

HOW TO SET TIMER

1. Press and hold TIMER key for 2 seconds.

The symbol appears in the display.

2. Press next or back to adjust the hour of the desired “on” time

And then press TIMER key to conﬁrm.

3. Press next or back to adjust the minutes of the desired “on” timeAnd then press TIMER

to conﬁrm.

4. Now the wording in the display changes to show .

5. Press next or back to adjust the hour of the desired “off” time And then press TIMER

to conﬁrm.

6. Press next or back to adjust the minutes of the desired “OFF” time

And then press TIMER to conﬁrm.

7. Now the display will indicate the “wake up mode” (TUNER, CD, USB, SD).

Press next to choose the desired mode & press TIMER to conﬁrm.

8. The display then shows the “wake up volume level” (loudness).

Press back or next to decrease or increase the volume level to be Used for the music to

be played when the timer switches on the unit at the Pre-set time.

9. Press TIMER to conﬁrm.

10.Finally the unit will return to the normal display, except that the Symbol will be shown,

to indicate that you have programmed an on/off Alarm setting.

11. In case you wish to disable the timer, press the TIMER key once, & the symbol will

disappear.

NOTE : the automatic On/ Off timer will switch on the unit as if you have manually pressed the “On/ Off”

key. If you have selected “wake to radio”, the exact preset radio band & station will become activated when

power Switches on).

IMPORTANT

If the timer “wake up mode” is set as wake to either CD/ USB or SD , you will need

to connect the device properly as described. Otherwise, the timer will default to wake

as radio at the set time. The timer set-up mode, will time-out if there is no input for 3

seconds and return to “Standby mode”. Should the timer set-up mode time-out, the timer

setting instructions will have to be repeated for the timer To be set.

E-6

SNOOZE FUNCTION

- Whenever the timer comes on, it can be temporarily suspended for a short period of 10

minutes, by pressing the “SNOOZE” key (on remote control) once.

- The timer will then automatically come on again after the 10 minutes “SNOOZE” period

has ended.

- The procedure can be repeated for approximately an hour.

MUTE FUNCTION

- This set has a mute function to enable you to turn off the volume temporarily.

- Press the Mute key (on remote control) once, the volume will turn off and the volume

bar will ﬂash.

- To resume the sound, simply press the Mute key again.

AUTOMATIC POWER OFF SLEEP FUNCTION

- This set has a special sleep timer function which can automatically switch off the unit.

This is useful for sleeping to music at night.

- At any time while the unit is operating, press SLEEP key (on remote control) repeatedly

to choose the automatic off time.

MINS 80

MINS 70

MINS 60

MINS 50

MINS 40

MINS 30

MINS 20

MINS 10

MINS OFF*

(*OFF MEANS SLEEP TIMER IS DEACTIVATED AND DISPLAY RETURNS TO

PLAYBACK INFORMATION)

ELECTRONIC VOLUME CONTROL

- This unit uses an electronic volume control (push button type).

- To increase or decrease the loudness of unit, press the volume up (+) or volume down (-)

keys respectively.

- Release the key when volume level is at the desired loudness.

- Sometimes, especially during listening to the radio, you may notice a

“CLICK-CLICK-CLICK” (repeating) sound when you are increasing or decreasing the

volume. This is a normal condition & the sound will disappear when you release the volume

key (when you reach the desired volume level).

MUSIC EQUALIZER

- Press EQ key repeatedly to choose the desired sound effect according to the music you

are listening to :

EQ OFF CLASSIC ROCK POP JAZZ

GENERAL FUNCTION

E-7

TEXT DISPLAY MODE (id3 display)

- This unit is capable of displaying the “TEXT INFORMATION” (id3 tag) of an MP3 song

on the LCD display.

- To switch on or off this function, simply press and hold the “id3” key (on remote control).

IMPORTANT

MP3 FILE NAME FORMAT

Please take care to use only regular english alphabets (a to z) & numerals (0 to 9) in

the ﬁle names of MP3 songs. Characters such as “ _ ” (underscore) & “ ” (space)

may result in the ﬁles being unreadable or inconsistently unrecognizable by the player.

PLAY MODE (P-MODE) FUNCTION

- At anytime during playback, press “MEM/ PROG/ P-MODE/ SLEEP” key on unit (or

“MEM/ PROG/ P-MODE” key on remote control) repeatedly to select the following

options:

REPEAT = To repeat the current track

REPEAT ALBUM = To repeat all songs from currently selected

folder(directory)

REPEAT ALL = To repeat all tracks (full CD)

INTRO = To “sample” all the music (about ﬁrst 10 secs.

of every song will be played)

RAND = Shufﬂe all songs and play in “random” order.

USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)

- You can connect the audio output of an external device such as a MP3 player to this unit,

to listen to the sound of that device through the high quality ampliﬁer of this music system.

- To connect the external device please use a standard stereo headphone (3.5mm to 3.5mm

plugs) cable to connect the “headphone-out or audio line-out” of the device to the aux-

input socket of this unit.

- Switch the function to “AUX” using the Function key.

- Make sure that the speakers are connected to the main unit.

- Switch on the unit and the external device (eg. MP3-PLAYER).

- Start playback of the external device and adjust the volume control of the main unit to the

desired level.

- Remember to switch off the unit when you are ﬁnished using the external device.

GENERAL FUNCTION

Autres manuels pour Evolution Z-7787

Table des matières

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur