SELTZAHUB
on/off
420gram
Existing CO2
Connect 5/16” tube in the back of the
SeltzaHub to CO2 inlet.
5/16”
Assemble the pressure reducer to the CO2 cylinder.
Ensure regulator is off. Turn counter-clockwise till it stops.
7
6
Plug in and turn on power. Let the cooling
system inside the SeltzaHub cool and carbonate
for 20 minutes. You should hear the pump feed
water into the machine and the compressor start up.
810 minutes after turning power on adjust the CO2
pressure regulator to 75 psi. Ensure no CO2 leaks
9
5
5, 10, or 20lbs
Existing CO2
Regulator adapter
CGA-320
Take the 5/16” gas tubing, cut as needed and assemble
the tubing to the pressure reducer.
Any CO2 bottles should always
be upright during use, storage and
transit. If the bottle has been left
horizontal, place upright and let it
stand for 60+ minutes to allow
content to settle before initialising.
mins.
mins.
20 minutes after operation
open the faucet valve and let
500ml (16 oz) of sparkling water.
10 Wait 20 minutes to let the system re-cool
and then tap 500cc of sparkling water.
11 Let system cool for 20 minutes.
Enjoy your Seltza water.
12
Water coming out
of second nozzle.
500ml/
(16oz)
mins.
mins.
Water coming out
of second nozzle.
500ml/
(16oz)
mins.
mins.
Left hand lever Left hand lever
to Seltza
regulator
5/16’
Installation, Operation,
and Maintenance Guide 8
