SELTECH NC52W33DF8 Manuel utilisateur

SELTECH Loudpspeakers

handling guide instructions

SELTECH –CONFIDENTIAL

AGENDA

1. General rules

2. Transportation

3. Unpacking

4. Handling

5. Disclaimer

General rules

Check arriving pallets on transport damage!

Don’t use transducers from damaged pallets.

Use first in first out!

The transducers always should be stored in the original packaging only!

Don’t touch the membrane.

In case the transducer is mounted into assemblies where an ultrasonic welding process

will be used after the transducer is already in place, the function of the transducer can be

damaged due to the USW!

Keep transducers away from magnetic regions! Avoid humid and hot air! Prevent

transducers from dropping on the floor because of the risk of damage to spring contacts!

Transportation

First off all, beware that the transport unit is fragile and handle it with care.

Check arriving pallets on transport damage and remove the plastic cover carefully.

In each situation keep the delivery unit dry.

Use the delivery units according the first in -first out principle in your warehouse.

If pallets should be stored consider that each transport unit has to stand separate.

To keep the effect of magnetism as low as possible, notice the special form to pile single

boxes on a pallet.

Transportation

Under no circumstances pile one pallet on each other.

Unpacking

Don’t pile up more than 3 boxes to a stack.

Cut carefully the top tape with a knife (green),

Then open boxes on the sides (blue arrows).

Unpacking

Don’t handle or move partial boxes.

The piles of tray finish have one unloaded tray as a cover.

If the top tray is loaded then an additional empty tray should be placed on top for further

transport/carriage from place to another.

Carry only horizontally.

Handling

Manual pick up:

take the transducers on the sides of the frame and move vertically.

We recommend to wear gloves.

Do not touch or push with sharp/edged tools.

Handling

Don’t touch moving part like the membrane area.

Don’t touch or apply force on the contacts.

Do not apply force on the cable add-on if present.

Handling

Keep transducers away from magnetic field.

Prevent using transducers dropped on the floor.

Avoid dust coming on the transducers, keep clean.

Don’t use cleaning with air guns directly on the transducers.

To assembly the speaker into the application be sure to avoid humid & hot air.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SELTECH Intervenants

SELTECH

SELTECH SOD20722X4CVT Mode d’emploi

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur