SELT SUNBREAKER 500 Manuel utilisateur

OPERATION AND MAINTENANCE MANUAL

ASSEMBLY

AND SAFE OPERATION MANUAL

5. Steel and aluminium component and tructural et

5.4 Pergola SB500

5.4

DT-E

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 2 / 57

PRODUCT NAME:

ALUMINIUM STRUCTURE

PERGOLA SB500

MARKING OF PRODUCT MANUFACTURER:

•Manufacturer name:

SELT Sp. z o. o.

•Manufacturer regi tered office:

45- 449 Opole, ul. W chodnia 23A

•Contact detail :

Tel: +48 77 553 21 00 ( ecretary’ office)

Fax: +48 77 553 22 00

•web ite

www. elt.com

•Email:

elt@ elt.com

PRODUCT SAFETY MARKING:

The product meet the CE afety requirement .

THIS OPERATION AND MAINTENANCE MANUAL:

•i valid from 15 APRIL 2020

•and i applicable to the above li ted product ver ion .

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 3 / 57

TABLE OF CONTE NTS

Table of content ........................................................................................................................................................................ 3

Introduction ................................................................................................................................................................. 4

1.1

Safety guideline for the product. ........................................................................................................................... 4

1.2

Explanation of ymbol and ign u ed ................................................................................................................... 4

1.3

Term and definition ............................................................................................................................................. 5

1.4

Subject, intended u e and content of the documentation ..................................................................................... 5

Product technical information ..................................................................................................................................... 7

2.1

Technical parameter : ............................................................................................................................................. 7

2.2

Product pecification .............................................................................................................................................. 9

Tran port and torage of the product ...................................................................................................................... 10

3.1

Completene and quality condition of the delivery ............................................................................................ 10

3.2

General condition for tran porting and toring the product. .............................................................................. 10

3.3

De cription , which hould be obligatory placed on the product packaging. ....................................................... 10

Product a embly ....................................................................................................................................................... 11

4.1

General requirement for afe a embly .............................................................................................................. 11

4.2

Requirement for afe a embly of the product at height .................................................................................. 11

4.3

Preparation for a embly ...................................................................................................................................... 12

4.4

General guideline for product a embly ............................................................................................................. 12

4.5

A embly tool ...................................................................................................................................................... 13

4.6

A embly ............................................................................................................................................................... 14

4.6.1

Pergola a embly ............................................................................................................................................. 14

4.6.1.1

Guideline for etting and anchoring the Pergola upport tructure .......................................................... 15

4.6.1.2

Pergola upport tructure in tallation ......................................................................................................... 17

4.6.1.3

Drive a embly ............................................................................................................................................ 40

4.6.2

Wall in tallation ............................................................................................................................................... 43

4.6.2.1

Wall in tallation REAR BEAM (WITHOUT BLADE AXIS) ................................................................................ 45

4.6.2.2

Wall in tallation SIDE BEAM (WITH BLADE AXIS) ........................................................................................ 45

Sy tem operation and product afety ........................................................................................................................ 47

5.1

General requirement for occupational health and afety ................................................................................... 47

5.2

Safety requirement related to pecial condition and product u e location . .................................................... 47

5.3

Operational afety ................................................................................................................................................ 48

5.4

Connection to electrical in tallation ..................................................................................................................... 49

5.5

Control .................................................................................................................................................................. 50

5.6

Start-up and adju tment ....................................................................................................................................... 50

5.7

Sy tem mi u e ...................................................................................................................................................... 51

U e and maintenance of the y tem.......................................................................................................................... 52

6.1

Intended u e of the y tem................................................................................................................................... 52

6.2

In truction for NON-PROFFESIONALS ................................................................................................................... 52

6.3

Technical in pection , maintenance and repair .................................................................................................... 52

6.3.1

Ba ic operation carried out during periodic in pection. ................................................................................. 52

6.3.2

Remark concerning routine maintenance. ..................................................................................................... 53

6.4

Maintenance operation ....................................................................................................................................... 53

General term and condition of warranty ................................................................................................................ 54

7.1

Warranty exclu ion .............................................................................................................................................. 54

Complaint / technical defect .................................................................................................................................... 55

8.1

Complaint ............................................................................................................................................................ 55

8.2

Technical damage ................................................................................................................................................ 55

Di mantling / di po al / liquidation of the product .................................................. Błąd! Nie zde iniowano zakładki.

Marking and labelling of the product with CE mark .................................................................................................. 57

10.1

Conformity of product with the CE tandard ........................................................................................................ 57

10.2

Information accompanying the CE marking .......................................................................................................... 57

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 4 / 57

1INTRODUC TION

1.1 SAFETY GUIDELINES FOR TH E PRODUCT.

The product ha been manufactured in accordance with the late t technical knowledge in the field of con truction and

manufacturing and meet the afety requirement in accordance with the following tandard .

No. Subject European Legal Basis Polish Legal Basis

Execution of teel and aluminum

tructure

Part 1: Requirement for

conformity a e ment of

tructural component

EN 1090-1:2009 +A1:2011 PN-EN 1090-1+A1:2012

Shutter and external venetian

blind . Performance

requirement including afety.

EN 13659:2015 PN-EN 13659:2015

3 Building product (CPR)

Regulation 305/2011 of the

European Parliament and of the

Council

Act of 16 April 2004 on building product

(Journal of Law No. 92 of 2019, item 881

a amended) (Journal of Law of 2016,

1570; Journal of Law of 2015, 1165;

Journal of Law of 2016, 542)

4 E ential requirement for the

machinery

Directive of the European

Parliament and of the Council

2006/42/WE

Regulation of the Mini ter of the

Economy of 21 October 2008. Journal of

Law of 2008, No. 199, item 1228) 1228

a amended (Journal of Law of 2011,

item 124)

Related document : Declaration of performance for compliance with EN 1090-1:2009 +A1:2011,

Declaration of performance for compliance with EN 13659:2015 and in tallation in truction, u er’ manual for motor

and control.

1.2 EXPLANATION OF SYMBOLS AND SIGNS USED

The following ymbol (pictogram ) indicate particularly important hazard and afety information.

Pictogram

Pictogram meaning In ormation

INFORMATION

Read and under tand the u er’ manual before u ing the product.

Ob ervation of the u er’ manual i a condition for:

- failure-free operation of the product,

- enforcing claim for defect .

Keep the manual for afety of the people.

INFORMATION No hazardou or harmful con equence for people or property.

NOTE! Situation, which can cau e product or other damage .

No hazard for people.

WARNING! Ri k of danger.

HAZARD!

Thi ymbol indicate all information concerning afety, which could po e a

hazard for human health or life in ca e of non-ob ervance. Health of life

hazard. Ri k: hazard of eriou per onal injury or death. Hazardou operation

which could cau e injurie or damage of the product.

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 5 / 57

WARNING! Human life or health hazard cau ed by electric hock.

HAZARD! Hand cru hing hazard.

WARNING! Head injury hazard.

ENVIRONMENT Marking of electronic or electric equipment, which hould be collected in the

de ignated point .

1.3 TERMS AND DE FINITIONS

For the purpo e of thi documentation the following term definition hall apply:

Product: PERGOLA SB500

The Pergola SB500 y tem i made of powder-coated aluminum profile and component made of tainle and galvani ed

teel. Roof framework made of movable aluminium blade . Angle of inclination of the blade can be changed. Product

de ign i offered in colour from RAL colour chart after confirmation of their availability by the manufacturer.

Mobile roo :

Part of the product con i ting of blade fixed to cro bearing beam , with option to change inclination angle of the blade ,

which are moved by a control mechani m, which en ure that the product operate a intended.

Blades: Part of the product, made of aluminium extruded profile , intended to coved horizontal or oblique urface being

filling of mobile roof. Blade hape en ure drainage of torm water and ae thetic cover again t un ray .

EXECUTIONS:

Free-standing - elf- upporting tructure containing ingle mobile roof module upported on front and rear column .

Modular - Self- upporting tructure con i ting of common beam and common po t con tituting an interconnected

tructure.

Wall-standing - Structure including a movable roof module, partially upported on po t and fixed by a roof beam to the

load-bearing wall (along the rear or ide edge of the roof) with through anchor (Selt not included) and pecial nut

(included)

1.4 SUBJECT, INTE NDED USE AN D CONTE NT OF THE DO CUMENTATIO N

Thi documentation cover the product manufactured by SELT Sp. z o.o.

Thi documentation applie to all PERGOLA SB500 types.

U er’ manual and in truction for afe u e, with motor manual, hould be handed over to the end u er.

IMPORTANT INSTRUCTION RELATED TO SAFETY

WARNING - IT IS VERY IMPORTANT TO PROCEED ACCORDING TO THIS MANUAL

TO ENSURE PEOPLE'S SAFETY

KEEP THIS MANUAL.

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 6 / 57

Thi documentation i valid only with the information applying to the given product available on the web ite

www. elt.com

The documentation i part of product delivery and hould be permanently kept nearby all the time. WARRANTY for the

product i al o an integral part of thi documentation.

The documentation contain :

•important guideline for a embly, u e and maintenance of the product,

•important recommendation for torage and tran port,

•guideline , which ob ervance would en ure many year of trouble-free operation of the product.

SELT Sp. z o.o. shall not be responsible or damages resulting rom non-observance o the recommendations included in

this documentation.

For further improvement of the product, SELT Sp. z o.o. re erve the right to introduce change , which, while maintaining

ignificant technical parameter , will be con idered appropriate for increa ing the quality of product operation and afety

of u e.

not be u ed, in whole or in part, for competitive purpo e or made available to third partie without permi ion.

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 7 / 57

2PRODUCT TECHNICAL IN FORMATION

Technical pecification of the product i available at www. elt.com after logging in

2.1 TECHNIC AL PAR AMETERS:

Pergola SB500 – Free-standing

Fig. 1. Standalone Pergola SB500 - Dimen ion : B max – maximum width, L max – maximum length, H max – frame

maximum height, H1 max – free clearance of the frame, H2 max – maximum height of po ition of the mechani m intended

to change angle of the blade .

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 8 / 57

Sy tem module dimen ion : width length height height in the

clearance

Supporting tructure to 5000 mm to 7000 mm to 3090 mm to 2800mm

Range of u e / operation

Roof blade pitch 250 mm

The difference of the fa tening blade’

(tran ver e lope - of the blade axi ) 5 mm

Ambient temperature +10 to +40°C (folding/unfolding of mobile roof)

- 30 to +50°C ( upport tructure)

Humidity 90% without conden ation (blade rotation)

in whole range ( upport tructure)

Electric drive of the motor with the following parameter :

- upply voltage 230V/50Hz

- power 126 W

- power con umption 0,55 A

- ingre protection IP 65

- continuou operation time 5 min

- cylinder advance force max. 200 mm, dynamic/ tatic force 1200N

- cylinder retract force 6 mm/

- operating temperature -20 to 80°C

Technical data of electric motor

Drive (drive type ): ELERO Piccolo XL linear drive. Electro-mechanical drive can be tarted manually

with a witch or through external wirele or radio control panel.

Connection to electrical in tallation approx. 2 m power cord

A embly:

Intended u e External

Site in tallation To the upporting ba e or to the wall (pu h-through in tallation with anchor

through the beam)

Detailed data for parameter of the individual motor are available on the web ite of motor manufacturer and on the

web ite:

www. elt.com→ OUR OFFER → AUTOMATION

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 9 / 57

2.2 PRODUCT SPECI FICATION

The product manufactured by SELT Sp. z o.o. have excellent technical and operational parameter .

List o product types:

•Free- tanding ingle module or modular,

•Wall-mounted ingle module or modular

•In talled out ide the building, tarted by a electro-mechanical drive connected to the control y tem,

They have the ollowing eatures:

•Mobile roof open electrically; it i po ible to in tall y tem by Selt Sp. z o.o. on wall

•Dedicated Slide wall y tem with fabric or blade

•Protect again t un and rain

•Waterproof thank to water drainage through an integrated gutter and front column to the extent provided by

the manufacturer.

•Location, method of fini hing, in tallation and eal a well a weather condition have a con iderable impact on

the waterproofne of the product.

•They limit acce of the daylight depending on the demand .

•They protect again t rain and wind impact (to the value limited by a wind rating acc. to EN 13659).

•No protection again t now fall.

•It i forbidden to tart the mobile roof during now fall or ice build-up and out ide the temperature range given in

the manual.

•They protect again t exce ive penetration of un ray .

•They do not limit external vi ibility (out ide the roof area).

•They do not relea e any toxic ub tance during operation.

•Noi e emi ion by the product with electro-mechanical drive (connected with working movement of the mobile

component , generated by electric motor during operation) i not con idered a ignificant hazard and i a matter

of comfort.

•The motor en ure IP 65 ingre protection of the enclo ure.

•Product and drive de ign allow the blade to be topped in the de ignated po ition in the working range afely

and to tay there when unu ed.

•Rotational motion of the blade can be tarted by manual witch or by remote control.

•Difference of angle of mobile roof’ blade clo ing may differ by 2° and it i a natural feature of the y tem due to

production and proce tolerance of the component .

•Cover of movable component have been de igned and executed in a way en uring afety for the operating

per onnel provided that they are correctly operated.

•Optional LED lighting in horizontal bar along the edge of the gutter

•Maximum drainage capacity remove rain with an inten ity of up to 0.05 l/ /m2 with a maximum duration of 5.3

minute (depending on the configuration of the drainage hole ).

DT-E 5.4: ALUMINUM CONSTRUCTION - PERGOLA SB500 SYSTEM (2020)

Edition5 / APRIL 2020 / EN page 10 / 57

3TRANSPO RT AND STORAGE OF THE P RODUCTS

3.1 COMPLETENESS AND QUALITY CONDIT ION O F THE DELI VERY

SELT Sp. z o.o. make every effort to en ure that the product matche your order. However, checking of product

completene hould be done by the Purcha er and take place when it i received.

The driver/warehou e keeper/a embly crew hould be immediately notified about the non-conformitie and they hould

be marked on the Stock I ue Confirmation on pain of lo of claim ari ing from it.

Checking of quality within the cope of apparent defect hould be done by the Purcha er and hould take place when the

good are received.

Mechanical damage , cratche , crack etc. hould be con idered a apparent defect .

SELT Sp. z o.o. undertake to rectify the non-conformitie in quantitie and po ible replacement of part with apparent

defect in the horte t po ible period of time.

3.2 GENERAL CONDIT IONS FOR TRANSPORTING AND STORING THE PRO DUCT.

List:

•the product i factory packed in cardboard packaging protecting again t damage during torage, during tran port

and during relocation to the final a embly location,

•product for tran port/ torage hould be et in accordance with the arrow indicated on the product packaging,

•do not tack the product in more than two (2) layer becau e the packing material can be cru hed, what in turn

may lead to permanent damage of the product,

•product placed on mean of tran port hould be protected again t relocation and damage during the tran port

(e.g. with di tance piece , protecting belt etc.).

•the product during tran port hould be protected again t rain or now,

•torage location hould be dry, well-ventilated and protected again t harmful impact of the weather ( un, rain,

etc.),

•if the product weight exceed 25 kg, it relocation to the final a embly location hould be carried out by an

adequate number of people o that each per on doe not carry more than 25 kg.

3.3 DESCRIPTIONS, WHICH SHOULD BE OBLIGATORY PLACED ON THE PRODUCT PACK AGING.

Plea e read carefully the operation and maintenance manual available at the following web ite prior to

the a embly and u e of the product: http://www. elt.com/doc-pl

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SELT Tente

SELT

SELT SB400 PRO Manuel utilisateur

SELT

SELT V ZIIIP Manuel utilisateur

Manuels Tente populaires d'autres marques

OZTENT

OZTENT JV SIGNATURE EDITION Manuel utilisateur

GigaTent

GigaTent Summer Chalet Mini Tent Manuel utilisateur

Coleman

Coleman 2000007827 Manuel

ShelterLogic

ShelterLogic 107153 Manuel utilisateur

Outsunny

Outsunny 84C-230 Manuel utilisateur

Napier

Napier SPORTZ COVE 61 Series Manuel utilisateur

EuroTrail

EuroTrail ATLANTIS PRO Manuel utilisateur

Reimo

Reimo Marina Manuel utilisateur

TiiTENT

TiiTENT TB300 Manuel utilisateur

Coleman

Coleman 2000033134 Guide d'installation

Ozark Trail

Ozark Trail W784.1 Guide de démarrage rapide

SlingFin

SlingFin CrossBow 2 Manuel utilisateur

Coleman

Coleman 9600-141 Manuel utilisateur

Palram

Palram Arizona 5000 Wave - WINGS Manuel utilisateur

COVERPRO

COVERPRO 56184 Instructions de montage

Vango

Vango Zenith 100 Manuel utilisateur

Costway

Costway PATIOJOY OP70818 Manuel utilisateur

Clarke

Clarke PUC 88 Manuel utilisateur