DT-E 11.8.1 TERRACE AWNING CASABLANCA
Edition: March 2016 / Issue 1
English
page 8 / 19
3Product installation
The following part covers general requirements of the product installation. Proper installation is
necessary for efficient operation of the product. SELT SP. Z O.O. recommends to use services of
skilled installation crews what guarantees the Purchaser proper installation.
3.1 General requirements for safe installation
it is necessary to follow general rules of construction art
it is necessary to follow health and safety regulations, especially concerning work with
electricity and at heights,
product should be installed on even and dry wall surfaces that at the same time ensure
proper strength and are completed according to general rules of building art,
before starting the installation remove all unnecessary elements from the installation area.
3.2 Requirements for safe installation at heights
Installation of the product, because it requires performing work at heights, is
particularly dangerous because it poses a high risk of danger to human health and
safety and in particular fall from height.
Opracowanie planu bezpieczeństwa i ochrony zdrowia podczas montażu należy do obowiązków
Nabywcy.
Preparation of a plan on health and safety during installation is the responsibility of the Purchaser.
Purchaser should determine specific requirements of health and safety when working at height, and
especially to ensure:
direct supervision of work execution by the designated person (e.g. the foreman),
adequate safeguards measures, in particular protective equipment against falls from height,
detailed instruction of employees performing work at heights.
Work at heights above 2 meters, requiring using personal protective equipment against falls from
height, must be performed by at least 2 people.
Work at heights should be organized and carried out in a way that does not force employees to lean
out of the railings or outline of a device on which they stand. The buyer has an obligation to ensure
that areas of work at heights can be accessed only by authorized and informed personnel. Health and
safety professionals should inform employees residing or staying at the conduct of such works or in
the vicinity of the site about conducted operations at heights and the necessary safety measures to
be applied during this work.
3.3 Preparation to installation
unpack product and check if it contains all necessary elements for installation,
make sure that the base where product will be mounted provides sufficient bearing capacity
for safe installation and operation of the product,
prepare set of tools necessary for installation.
