Seicane S126005 Mode d’emploi

Table des matières

Autres manuels Seicane Récepteur de voiture

Seicane

Seicane S128007 Mode d’emploi

Seicane

Seicane S121013 Mode d’emploi

Seicane

Seicane S126011 Manuel utilisateur

Seicane

Seicane S127668 Mode d’emploi

Seicane

Seicane S085991 Mode d’emploi

Seicane

Seicane S127027 Mode d’emploi

Seicane

Seicane S127305 Mode d’emploi

Seicane

Seicane S126008 Mode d’emploi

Seicane

Seicane S126001 Mode d’emploi

Seicane

Seicane S12753 Mode d’emploi

Seicane

Seicane H201 Manuel utilisateur

Seicane

Seicane S085993 Mode d’emploi

Seicane

Seicane S018817 Mode d’emploi

Seicane

Seicane S168069 Mode d’emploi

Seicane

Seicane S168027 Mode d’emploi

Manuels Récepteur de voiture populaires d'autres marques

Motorola

Motorola VWA63 Manuel utilisateur

Nextar

Nextar D3201 Manuel utilisateur

Alpine

Alpine CDE-163BT Manuel utilisateur

Pioneer

Pioneer DEH-P645R Manuel utilisateur

Axxera

Axxera XDMA7600 Mode d'emploi

XM

XM OnyX Manuel utilisateur

Sound Storm

Sound Storm STM93R Manuel utilisateur

Soundstream

Soundstream VIR-5000 Manuel utilisateur

Avson

Avson MKT Platform Manuel utilisateur

Sony

Sony MEX-1HD - Audio Library System Manuel utilisateur

Pioneer

Pioneer DVH-P500UB Manuel utilisateur

JVC

JVC KD-AHD69 Manuel utilisateur

Blaupunkt

Blaupunkt SANTIAGO CR 87 Manuel utilisateur

Sony

Sony CDX-4160 - Cd Receiver Manuel utilisateur

XFIRE AUDIO

XFIRE AUDIO BMW42S Manuel utilisateur

VDO

VDO CD 2253 Manuel utilisateur

Volvo

Volvo 13 84 580 Manuel utilisateur

ZENEC

ZENEC ZE-160DVD Manuel utilisateur

www.seicane.com

Seicane S126005 Universal aftermarket car radio upgrade

installation replacement instruction

Seicane S126005 Universal car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2. nsure connect the yellow and red power cable at last.

3. nsure that all loose wires are isolated with electrical tape

4. nsure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. nsure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult

the professional.

7. For your convenience, here’s the recommended tools for removal and installation from

Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-

srd-400

www.seicane.com

Universal car stereo installation guide

Step 1:

Use a screwdriver to remove two screws above the original car radio.

Step 2: Remove the trim panel.

Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim

panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying

up on the trim panel.

Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver.

Then gently take the factory radio off the panel.

www.seicane.com

Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical

plugs running to the back of the radio.

Step 5: Check all the accessories for the new Seicane car radio.

Step 6. Connect the harnesses to the back of the new Seicane car radio.

www.seicane.com

Step 7. Connect the Seicane car radio to your original car radio 's plugs.

Step 8: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If

it doesn’t, please check whether all the cables are connected correctly.

Step 9: After the test, please put the new Seicane car stereo into the dash.

Step 10: Install all the screws and the trim panel into their original place.

lease note:

We suggest you arrange a professional to install it. If you have any questions about installation,

please send us photos about your original car's plugs, we can make a wiring diagram for your car.