Seeley Climate Wizard CW-6S Microcore Manuel utilisateur
OWNER’S MANUAL
Climate Wizard CW-6S Microcore
(English)
Original English Instructions
2 |
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
FOR EUROPE
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
FOR AUSTRALIA, NEW
ZEALAND & OTHER NON-
EUROPEAN COUNTRIES
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
----------------------------------------
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualied persons in
order to avoid a hazard.
New hose sets supplied with
the appliance are to be used
and old hose-sets should not
be re-used.
WARNING – This appliance
is tted with a fuse that may
operate should a fault occur.
Only replace with a fuse of
equivalent rating: T10AH 250V,
size 5 x 20mm
WARNING - TO REDUCE THE
RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO
PERSONS, OBSERVE THE
FOLLOWING:
a) Use this unit only in the
manner intended by the manu-
facturer. If you have questions,
contact the manufacturer.
b) Before servicing or cleaning
unit, switch power o at service
panel and lock the service dis-
connecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot
be locked, securely fasten a
prominent warning device,
such as a tag, to the service
panel.
CW-6S MICROCORE OWNER’S MANUAL |3
Never force parts to t because
all parts are designed to t
together easily without undue
force.
Never drill holes in the cooler’s
water reservoir.
IMPORTANT NOTES!
In areas where temperatures
can cause water supply pipes
to freeze, a drain down facility
should be provided during the
installation. This drain down
facility must be activated prior
to freezing conditions, to avoid
possible damage to the cooler
components.
As with any product that has
moving parts or is subject
to wear and tear, it is VERY
IMPORTANT that you
maintain the product and have
it regularly serviced. It is a
condition of warranty cover for
your product that you comply
with all of the maintenance
and service requirements set
out in the Owner’s Manual.
Compliance with these
requirements will prolong the
life of your product.
IMPORTANT SAFETY
INSTRUCTIONS
1 |
TABLE OF CONTENTS
OPERATING THE SYSTEM 2
GENERAL TIPS 2
QUICK REFERENCE
Rooftop Cooling unit 3
CONTROLLER SETTINGS 4
QUICK START 5
OPERATION
Navigation 8
Manual Mode - Cooling 8
Manual Mode - Heating (if tted) 9
Program Mode 9
SETTINGS MENU
General Menu 13
Cooling Menus 13
Service Menu 14
WARNINGS & SERVICE MESSAGES 15
SLAVE CONTROLLERS 16
POWER OUTAGES 16
CONTROLLER TROUBLE SHOOTING 16
REMOVING SIDE PANELS 17
ACCESS FOR SERVICING AND MAINTENANCE 17
SEASONAL MAINTENANCE
Pre-Season 18
During Season 18
End of Season 18
MAINTENANCE SCHEDULE 19
TROUBLESHOOTING 20
HOW TO REGISTER YOUR WARRANTY (Australia Only) 21
WARRANTY TERMS AND CONDITIONS (Australia Only) 22
CW-6S MICROCORE OWNER’S MANUAL |2
Hello and congratulations on
purchasing a
Seeley International
Climate Wizard CW-6S
Microcore Cooler
At Seeley International we manufacture
Climate Wizard® Air Conditioning systems
from the highest quality materials, and
we have designed the product to provide
many years of economical, trouble-free
air comfort and control.
OPERATING THE SYSTEM
Ensure the air ow to the return air duct is
not impeded or diluted by open windows
or open/closed doors.
There are three main ways that a CW-6S
Cooler can operate to provide comfort.
• The system can be set at a constant
fan speed, without reference to the
current temperature.
• The system can be given a temperature
target, in which case it will vary the fan
speed (in cooling mode) in order to
get as close to the target as possible.
(Note! Humid weather conditions may
limit what cooling temperatures can be
achieved.)
• The system can be set to a fan only
mode, providing air circulation only.
• Mount the MagIQtouch Controller in
a room you want climate controlled.
Ideally it should be positioned 1.5m (5’)
from the oor and away from any other
heating or cooling sources.
• Ensure the MagIQtouch Controller is
not exposed to direct sunlight as this
will impact the temperature reading.
• Avoid blocking or restricting the
vent holes located in the side of the
MagIQtouch Controller, as this is where
the thermostat is located.
• Do not use harsh chemical cleaners to
clean the touch screen. For best results
use distilled water or a touchscreen
specic cleaning agent with a microbre
cloth.
GENERAL TIPS
3 |
QUICK REFERENCE
Here’s a brief visual guide to the main features of your wall controller.
System On/O Time Date
External / Internal “Live” Temperatures
(External Temperature is only available
if an External Sensor is tted to your
System)
Decrease Temp
or Fan Speed
Thermostatic
Mode
Primary Modes
Cooling, Heating
or Fan Only
Set Temp or
Fan Speed
Increase or
Decrease
Temp or Fan
Speed
Select
Thermostatic
or Fan Speed
Control
(Cooling mode
only)
Select
Automated
Times for
Appliances to
Turn On or O
Optimise your
Wall Control
and System
Fan Speed Control
(Overrides
Thermostatic
Control)
CW-6S Microcore Cooler
Rooftop Cooling unit
CW-6S MICROCORE OWNER’S MANUAL |4
Your MagIQtouch Controller contains a
settings menu, which gives you access to
information about your CW-6S Microcore
Cooler and to extra functions including:
About Appliance
Access information about the appliances
installed in your system.
Min/Max Set Temperature
You can change the minimum and
maximum temperature displayed on your
slider, depending on what temperature
range you prefer your system to work
within.
Night Quiet Mode
Restrict fan speed over the night time
period for a quiet night’s sleep.
Manual Drain
This will turn the rooftop unit o and drain
the tank.
Drain and Dry
This option allows you to nominate a time
each day when the rooftop unit will drain
the tank and run the fan for 1 hour.
Autoclean
Select the preferred cleaning interval
(50 / 100 / 200 hrs). At 8.00am after
the selected running hours has been
reached, the rooftop unit will drain the
tank, ll with fresh water and operate the
pump for 5 minutes. When complete,
drains the tank and returns to previous
operation mode.
External Sensor (optional)
Rooftop units can be
tted with an external
air sensor. When switched on, it displays a
live external ambient temperature reading
on the wall controller. Where climate
conditions are close to freezing, an external
temperature set point can be programmed
to auto drain the tank and prevent freezing
conditions damaging the tank.
Note! There are some settings, which
are locked and are only for installers or
service technicians.
CONTROLLER SETTINGS
5 |
ILL1521-C
ILL1522-C
QUICK START
Here’s a brief visual guide to get you
started quickly!
Continue reading for detailed
instructions.
Step 1
Activate screen.
ILL1523-C
Step 2
Select mode from lower taskbar.
ILL1525-A
ILL1525-C
Step 3
Turn on cooling or fan only mode
ILL1544-C
CW-6S MICROCORE OWNER’S MANUAL |6
QUICK START cont
ILL1527-C
ILL1528-C
ILL1528-C
ILL1527-C
Step 4
Set desired temperature.
ILL2413-A
ILL2414-A
Step 5
Switch between thermostatic control to
fan speed control.
Note: When in thermostatic mode the fan
speed automatically adjusts to achieve
set temperature.
7 |
ILL1531-A
ILL1531-C
ILL1563-C
Step 6
Access wall control and system settings
in the SETTINGS menu.
QUICK START cont
Autres manuels pour Climate Wizard CW-6S Microcore
1
Table des matières
