seeCube Glasses-Free 3D Manuel utilisateur
65” Glasses-Free 3D Display
User Manual
Version: 1.0
ii
Table of Contents
1. Safety Precaution
1.1. Power ...................................................1
1.2. Cleaning .................................................1
1.3. Vent Holes ................................................2
1.4. Temperature & Fire .........................................2
1.5. Lightning .................................................2
1.6. Installation and Important Information ...........................2
Installation of a Pedestal Stand (Optional)................................................2
Installation of a Wall Mounting Bracket.....................................................4
2. Overview
2.1. Packing Checklist ..........................................5
2.2. Display Overview...........................................6
2.3. Remote Control Overview ....................................7
3. Setup
3.1. Setting up the Remote Control ................................9
Changing the Battery ................................................................................9
Install Remote Control USB Receiver.....................................................11
Pairing the Remote Control..................................................................... 11
3.2. Connecting the Display .....................................12
Connecting to HDMI Device....................................................................12
Connecting A USB Device ......................................................................13
Connecting the Audio Device..................................................................15
Connecting to Ethernet ...........................................................................15
3.3. Powering on the Display ....................................16
4. On-Screen Display Menu
4.1. Main Menu...............................................17
4.2. Input Menu ..............................................18
4.3. Conversion Menu .........................................19
Mode Menu.............................................................................................20
4.4. Picture Menu .............................................21
Borders Menu .........................................................................................22
iii
4.5. Preferences Menu .........................................23
Network Mode Menu...............................................................................24
Upgrade Software...................................................................................26
4.6. Device Status Menu .......................................29
4.7. Info Menu ...............................................30
5. Troubleshooting
6. FAQ
............................................35
7.2. Preset Modes ............................................36
7.3. HDMI Timing .............................................36
7.4. Video Input Limitations .....................................36
iv
Copyright
This publication, including all photographs, illustrations and software,
is protected under international copyright laws, with all rights reserved.
Neither this manual, nor any of the material contained herein, may be
reproduced without the express written consent of the manufacturer.
Disclaimer
The information in this document is subject to change without notice.
Furthermore, the manufacture reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation to notify any person of such revision or
changes.
Compliance Information
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
U.S. Responsible Party: ________________________________________________
Address: ____________________________________________________________
Tel. No.: _____________________________________________________________
Type of Product:
Model:
v
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety
Regulations according to CAN/CSA C22.2 No.60065-03.
FCC Information:
monitor so as not to interfere with radio and television reception.
(1) Please use the supplied power cord or equivalent to ensure FCC
compliance.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for
help.
FCC CAUTION
To assure continued compliance and avoid possible undesirable
interference, ferrite cores may be used when connecting this display to
video equipment. Maintain at least 400mm spacing to other peripheral
devices.
vi
FCC warning
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
CAN ICES-3 (B) / NMB-3(B)
Standard Television Receiving Apparatus-Appareil de réception
télévision ordinaire, Canada, BETS-7/NTMR-7
If necessary, the user should contact the dealer or an experienced
radio/television technician for additional suggestions. The user may
Commission, helpful: “How to Identify and Resolve Radio-display
Interference Problems.” This booklet is available from the U.S.
000-00345-4.
Do not throw the battery in municipal waste. The symbol of the crossed out
wheeled bin indicates that the battery should not be placed in municipal
waste.
Limited Warranty
seeCube Glasses-Free 3D makes the following limited warranties
during the warranty period: (a) the Product will function properly under
normal use; (b) the Product will be free from defects in materials or
workmanship.
About this Manual
This document provides information related to functionality of
this seeCube Glasses-Free 3D device. Although it provides basic
information related to equipment connections, this document is not
1
Safety Precaution
1. Safety Precaution
Please read the following recommended safety precautions carefully
for your safety.
1.1. Power
To disconnect your seeCube Glasses-Free 3D from the power source,
cable from the power source.
1.2. Cleaning
Disconnect your seeCube Glasses-Free 3D from the power source
before cleaning.
Do not clean your seeCube Glasses-Free 3D while it is switched on.
Use a soft and damp cloth to clean the surface of product. Do not use
chemical cleaners to clean the screen. Do not apply cleanser directly
on your display.
Do not use the following cleaning products:
Alkaline lye (e.g. pure soap, certain textile detergents),
Lye (e.g. toilet cleaner),
Acids (e.g. hydrochloric acid, vinegar, lemon),
Degreasing Agents (e.g. acetone, methylene chloride),
Ammonia, chlorine or hypochlorite detergents (e.g. toilet cleaner),
Solvents (e.g. Ethyl alcohol, Isopropyl alcohol, alcohol, acetone,
trichloroethylene, benzene, hexane, petrol).
Do not use coarse millinery such as abrasives, steel wool, sponge with
abrasives, cloth with thread made of steel, hard cloth or paper tissue.
2
Safety Precaution
1.3. Vent Holes
Vent holes on the cabinet of your seeCube Glasses-Free 3D product
ensure optimum performance of your display without overheating. Do
not block the openings in any way.
1.4. Temperature & Fire
sources.
1.5. Lightning
Disconnect your product’s power cord during an electrical storm to
prevent a potential electrical shock from lightning.
1.6. Installation and Important Information
Installation of a Pedestal Stand (Optional)
Warning:
To prevent damage to the monitor or personal injury, read all
safety information as provided by the pedestal stand manufacturer
before beginning any installation procedures.
Warning:
To prevent damage to the monitor or personal injury, make sure
the pedestal stand meets all requirements for the size and weight
of the monitor prior to installation.
Warning:
The installation procedure requires no less than four individuals to
move the monitor. To prevent damage to the monitor or personal
injury, do not attempt to move the monitor with fewer individuals
than the recommended number.
1. Unplug and remove all cabling from the bottom of the display.
2. Clear a work surface and prepare it to allow space for the monitor.
3. Place a soft cover over the work surface to prevent scrateches or
other damage to the monitor display.
3
Safety Precaution
4. Carefully place the monitor (front side facing down) over the
work surface and slowly lay it on the work surface. Make sure the
monitor is secure before releasing the monitor.
5. Remove the 4 plastic caps that cover the screw holes (left side x
2, right side x 2) for attaching the stand.
6. Align the holes on the stand with the holes on the rear side of the
seeCube Glasses-Free 3D.
7. Secure the stand with the provided screws.
The following screw type is recommended for use in a pedestal stand
installation: M6 x 9mm.
NOTE:
It is not recommended to insert the screws into the screw holes
4
Safety Precaution
Installation of a Wall Mounting Bracket
Please use a wall bracket appropriate for the size and weight of the
display. The seeCube Glasses-Free 3D is compatible with a standard
VESA mount.
Four people are required for installation
1. Unplug and remove all cabling from the bottom of the display.
2. Clear a work surface and prepare it to allow space for the monitor.
3. Place a soft cover over the work surface to prevent scrateches or
other damage to the monitor display.
4. Follow the instructions provided with your wall bracket. Before
mounting, make sure the appropriate brackets are attached to the
wall and the back of the display as described in the instructions
provided with the wall bracket.
5. Always use the provided screws (M8 x 14mm) by the wall mount
manufacturer.
Ce manuel convient aux modèles suivants
1
Table des matières
