Security Solutions, Inc. VPTZ-100 Manuel utilisateur
0
Notes on Safety
◎Please read the instructions & quick setting guide thoroughly
before installing or operating the unit.
◎Please do not mount the machine on an unstable surface or
bracket.
◎Please prevent liquids or other material from entering the
dome housing.
◎When connecting the power source, please follow all
electrical safety standards and procedures. Use only the power
supply designed for this device. The speed dome’s RS-485 and
video signal uses TVS technology to protect it from strong
electrical surges. This technology prevents damage to the
device resulting from impulse signals such as lightning strikes
or surges of power. Allow for enough distance between the
RS-485 and video signals and high-voltage equipment or
cables during the transmission process. Please do not power
the unit until all connections are secure and installation is
complete.
◎Avoid shooting very bright objects directly into the camera’s
CCD (such as the sun or light fittings).
◎When the machine is not operating properly, please refer to
the instructions for information about how to service or repair
your speed dome.
◎Please protect the unit against extremes of vibration,
pressure or dampness while transporting unit. Damage can
occur from improperly packaging the unit while shipping.
◎The outdoor dome camera system is designed to be installed
in outdoor environments only.
INDEX
Ⅰ. INTRODUCTION………………………………………………………….…..1
Ⅱ.TECHNICAL DATA…………………………………………………………...1
Ⅲ. SETTINGS……………………………………………………………….…….2
3.1 XTS-SO10XDN-WP DOME ADDRESS,TRANSMISSION SPEED,PROTOCOL
SETTING .................................................................................................................3
3.1.1 SPEED DOME CAMERA COMMUNICATION ADDRESS SETTING ....................4
3.1.2 SPEED DOME CAMERA COMMUNICATION PROTOCOL SETTING..................4
3.1.3 SPEED DOME CAMERA TRANSMISSION SPEED SETTING (BAUD RATE
SETTING)................................................................................................................5
3.1.4 RS-485 BUS MATCHING RESISTANCE ......................................................6
3.2 XTS-SO10XDN-IND DOME ADDRESS,TRANSMISSION SPEED,
PROTOCOL SETTING ..............................................................................................6
3.2.1 SPEED DOME CAMERA COMMUNICATION ADDRESS SETTING ....................7
3.2.2 SPEED DOME CAMERA COMMUNICATION PROTOCOL SETTING..................8
3.2.3 SPEED DOME CAMERA TRANSMISSION SPEED SETTING (BAUD RATE
SETTING)................................................................................................................8
3.2.4 RS-485 BUS MATCHING RESISTANCE ......................................................9
IV. BASIC FUNCTION OF DOME CAMERA…………………………………10
4.1 OBJECTIVE TRACKING ...................................................................................10
4.2 PRESET POSITION SETTING /ADJUSTING *...................................................10
4.3 DOME PATTERN TOURS *...............................................................................10
4.3.1 Preset Position Parameter Setting....................................................10
4.3.2 Pattern Tours Setting.......................................................................... 11
4.4 AUTO SCANNING............................................................................................11
4.4.1 Point A to B Scanning...................................................................... 11
4.4.2 360° Scanning *................................................................................ 11
4.5 AUTO-FLIP .....................................................................................................11
4.6.1 Focus Change...................................................................................... 11
4.6.2 Focus Control....................................................................................... 11
4.6.3 Iris Control............................................................................................12
4.7 MEMORY FUNCTION AS POWER OFF ............................................................12
4.8 AUTO-REPOSITION .........................................................................................12
V. CAMERA MENU (OSD MENU) SETTING…………………………………13
5.1 SYSTEM INFORMATION ..................................................................................13
5.2 SPEED DOME OSD SETTING WITH CONTROL KEYBOARD ...........................14
VI. CAMERA OPTIONAL FUNCTIONS……………………………………….24
6.1 ALARM LINKAGE FUNCTION ...........................................................................24
6.2 PRESENT POSITION CHAR OVERLAP FUNCTION ..........................................24
VII. PROTOCOL ORDER……………………………………………………….24
VIII. ADDRESS-BINARY CODE CHART……………………………………..27
IX. EXCEPTION HANDLING……………………………………………….....36
------------------------------------------------------------------------------------------------
* indicates the functions with default protocol, it might not function
by using other protocols.
# indicates the optional functions, only with certain models
1
. IntroductionⅠ
Congratulations on purchasing our speed dome, an intelligent,
high-speed dome with a high-performance DSP camera and
sophisticated zoom lens. It is an advanced technological
surveillance product combining an all-direction variable speed
dome and digital decoder all in one unit. It can aim quickly and
scan continuously, making omni-directional and non-blind-spot
monitoring into reality. Additionally, it can quickly adapt to changing
environments with its 18x optical and 12x digital zoom with precise
stepping motors. The advanced stepping motor technologies
enable the dome to rotate smoothly, respond sensitively and aim
precisely. The speed dome camera has a memory function so
when the power cuts off it can auto resume to previous working
status. Use our high-performance speed dome “When it Counts.”
All of the features make the intelligent high-speed dome camera fit
for a wide range of applications such as intelligent building, bank,
street of city, airport, station etc..
.ⅡTechnical Data
Technical Parameters of the Intelligent High-speed
Dome
2
----------------------------------------------------------------------------------------------
* indicates the functions with default protocol, it might not function
by using other protocols.
# indicates the optional functions, only with certain models.
Ⅲ. Settings
The setting of XTS-SO10XDN-WP and XTS-SO10XDN-IND is partly
different, 3.1 corresponds to the setting of VT-SP100W, 3.2 corresponds to the
Model Outdoor
Day/Night Speed Dome
Indoor
Speed Dome
Power Supply AC24V±4V
Operating temperature - 40 ~+60℃℃ 0~+40℃℃
Operating moisture ≤95%
Power consumption ≤20W
Communication RS-485 bus
Communication transmission speed 1200bps / 2400bps / 4800bps / 9600bps
Horizontal rotation speed 0.1° - 280°/s (1-64 grade shift gears)
Horizontal rotation range 360°
Tilt rotation range 90°
Auto flip 2 grades (Horizontal 180° for 1st grade, Vertical 90° for 2nd grade)
Auto zoom speed control Control speed auto-adjusted according to zoom length changing
A-B points scan * Can set freely
A-B points scan speed * 1- 64 grade available
Dwell time at preset position * 1 - 60s available
Preset Positions * 128 pcs
Running to preset speed * 1 - 64 grade available
Cruise Tour * 8 group
Cruise Points Qty per cruise group * 16 preset positions
Pattern * 1 pc
Pattern Memory Time * 88 Seconds
Privacy Zone * 2
Fan & Heater # Temperature auto-controlled
3
setting of VT-100K.
3.1 XTS-SO10XDN-WP Dome Address, Transmission
Speed, Protocol Setting
Before the dome is installed, the communication protocol, baud
rate and dome address, should be confirmed. Set the code switch,
keeping the setting consistent with the control system. The relative
code switch site and connecting wires are diagramed below for
reference.
4
3.1.1 Speed Dome Camera Communication Address
Setting
The communication address code for the speed dome should be
properly set before use to ensure accurate addressing of the dome
at the control center and to control several dome cameras. The
address code is made up of SW3 (8 bits) on PCB board. The 8 bit
switch uses the 8421 binary coded decimal system. The largest
value is 256. 1 means ON status and 0 means OFF status.
3.1.2 Speed Dome Camera Communication Protocol
Setting
The 1st, 2nd and 3rd bits in SW2 are used to set
communication protocol (see following figure)
5
3.1.3 Speed Dome Camera Transmission Speed Setting
(Baud Rate Setting)
The 4th and 5th bits of SW2 on the PCB board are used to set the
baud rate (see following figure). The default baud rate setting is
9600 bps.
Baud Rate Options: 1200bps 、2400bps 、4800bps、9600bps
Please refer to the controlling device and protocol for baud rate
requirement.
6
3.1.4 RS-485 Bus Matching Resistance
For better centralized control, a matching resistance should be
connected in a parallel way at the connecting port where the
RS-485 is connected into the device which is the furthest away
from the center controller. By doing this, reflection and interference
from the RS-485 signal and the like can be cleared up. There is a
switcher for controlling of the matching resistance in SW2. And the
matching resistance is connected to the RS-485 cable when the
“No. 8” switcher is set to “ON” status (see following figure).
3.2 XTS-SO10XDN-IND Dome Address, Transmission
Speed, Protocol Setting
Before the dome is installed, the communication protocol, baud
rate and dome address, should be confirmed. Set the code switch,
keeping the setting consistent with the control system. The relative
code switch site and connecting wires are diagramed below for
reference.
Table des matières
