Direct Programming Manual Edge Smart Keypads and Card Readers
If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390.
Add Latch Code(s) to Relay A on Both Wiegand Inputs_________________________________________ 32
Add Latch Code(s) to Relay A on Wiegand Input 1 _____________________________________________ 35
Add Latch Code(s) to Relay A on Wiegand Input 2 _____________________________________________ 37
Add Access Code(s) to Relay B on Both Wiegand Inputs _______________________________________ 39
Add Access Code(s) to Relay B on Wiegand Input 1 ____________________________________________ 41
Add Access Code(s) to Relay B on Wiegand Input 2 ____________________________________________ 44
Add Latch Code(s) to Relay B on Both Wiegand Inputs_________________________________________ 46
Add Latch Code(s) to Relay B on Wiegand Input 1 _____________________________________________ 48
Add Latch Code(s) to Relay B on Wiegand Input 2 _____________________________________________ 50
Change Default Facility Code __________________________________________________________________ 53
Add Split-Relay Access Code on Wiegand Inputs _______________________________________________ 53
Add Split-Relay Latch Code on Wiegand Inputs ________________________________________________ 55
Delete Code(s) on Both Wiegand Inputs _______________________________________________________ 57
Delete Code(s) on Wiegand Input 1 ____________________________________________________________ 59
Delete Code(s) on Wiegand Input 2 ____________________________________________________________ 61
Set Unit Clock Time ____________________________________________________________________________ 64
Set Unit Clock Date ____________________________________________________________________________ 64
Configure Split-Relay Function _________________________________________________________________ 64
Toggle Silent Mode ____________________________________________________________________________ 66
Configure Anti-Passback _______________________________________________________________________ 66
Configure Wiegand Inputs _____________________________________________________________________ 69
Configure Wiegand Bit Format_________________________________________________________________ 70
Configure Wiegand Code Scheme _____________________________________________________________ 71
Configure Wiegand Validation Method ________________________________________________________ 72
Change Wiegand Code Length _________________________________________________________________ 72
Add Access Code(s) to Relay B _________________________________________________________________ 73
Add Limited-Use Code _________________________________________________________________________ 73
Enter Pairing Mode ____________________________________________________________________________ 74
Delete All Codes and Timers ___________________________________________________________________ 74
Master Code Reset_____________________________________________________________________________ 74
Unit Reset______________________________________________________________________________________ 75
Technical Support _____________________________________________________________________ 75
