Secotech ST-031M Piranha Manuel utilisateur

ST-031M Piranha

Multi-purpose Search Device

USER MANUAL

TABLE OF CONTENTS

1. INTRODUCTION ...................................................................................................................................................................... 2

2. GENERAL CHARACTERISTICS OF THE DEVICE ........................................................................................................................3

2.1. PURPOSE AND MAIN FEATURES ..............................................................................................................................3

2.2. PACKING AND DELIVERY SET ...................................................................................................................................4

2.2.1. Packing ...................................................................................................................................................... 4

2.2.2. Delivery set ................................................................................................................................................5

2.3. DESIGN OF THE MAIN CONTROL, PROCESSING AND DISPLAY UNIT.........................................................................6

3. ST-031M OPERATION MODES................................................................................................................................................ 7

3.1. SWITCHING ON ST-031M.......................................................................................................................................... 7

3.2. MODE "CHANNEL SELECTION" .................................................................................................................................7

3.2.1. "Settings" mode..........................................................................................................................................8

3.3. "CHANNEL 1" MODE ...............................................................................................................................................9

3.3.1. "Panorama" mode ..................................................................................................................................... 9

3.3.2. "Differential" mode ...................................................................................................................................10

3.3.3. "Fixed Frequency" mode ............................................................................................................................11

3.3.4. "SEARCH" Mode .........................................................................................................................................12

3.3.5. "Analysis" mode ........................................................................................................................................ 13

3.3.6. "Wireless communications" mode .............................................................................................................14

3.3.7. Recommendations for the use ST-031M in selective RF detector mode ("Channel 1") .............................16

3.3.7.1. Search using automated signal detection mode ..................................................................................17

3.3.7.2. Search in manual mode ....................................................................................................................18

3.3.7.3. Search in “Wireless Networks” mode ................................................................................................ 20

3.4. "CHANNEL 2" MODE. SCANNING RECEIVER ............................................................................................................23

3.4.1. "Panorama" mode ..................................................................................................................................... 23

3.4.2. "Differential" mode ....................................................................................................................................24

3.4.3. "Fixed Frequency" mode ............................................................................................................................25

3.4.4. "SEARCH" mode..........................................................................................................................................26

3.4.5. "Analysis" mode ........................................................................................................................................ 27

3.4.6. Recommendations for the use of ST-031M in scanning receiver (Channel 2) mode ................................. 28

3.4.6.1. Search using automated signal detection mode ..................................................................................30

3.4.6.2. Search using manual signal detection mode .......................................................................................32

3.5. "CHANNEL 3" MODE. LOW-FREQUENCY AMPLIFIER ...............................................................................................34

3.5.1. Mode enabling/disabling ...........................................................................................................................34

3.5.2. Selecting the type of the adapter .............................................................................................................. 34

3.5.3. Sub-mode “Oscilloscope” ........................................................................................................................... 34

3.5.4. Sub-mode “Linear spectrum” .....................................................................................................................35

3.5.5. Sub-mode “Octave spectrum” ....................................................................................................................35

3.5.6. Recommendations for the use of ST-031M in “Channel 3”-Low-frequency amplifier ................................36

3.5.7. Multipurpose adapter for checking wire lines (BWLC031M) in the mode Low- frequency amplifier ........36

3.5.8.1. Conductive wire lines differential generator .......................................................................................37

3.5.8.2. Induction converter (Magnetic field sensor) .......................................................................................38

3.5.8.3. Ultrahigh frequency sensor (UWBD031M) .........................................................................................39

4. OPERATING ST-031M WITH A PERSONAL COMPUTER ........................................................................................................ 40

4.1. THE PROGRAM ST031M-PIRANHA .......................................................................................................................... 40

4.2. “CHANNEL 1” MODE ................................................................................................................................................41

4.2.1. “Search” mode ...........................................................................................................................................42

4.2.2. “Wireless Networks” mode ........................................................................................................................42

4.2.2.1. Mobile devices ................................................................................................................................ 43

4.2.2.2. Base stations ................................................................................................................................... 43

4.2.2.3. User list...........................................................................................................................................43

4.2.3. “Fixed frequency” mode ............................................................................................................................44

4.2.4. “Oscilloscope” mode ..................................................................................................................................45

4.3. “CHANNEL 2” MODE ................................................................................................................................................46

4.3.1. “Search” mode ...........................................................................................................................................46

4.4. “CHANNEL 3” MODE ................................................................................................................................................47

4.4.1. “Settings” menu ......................................................................................................................................... 48

4.4.2. “Help” menu ..............................................................................................................................................48

5. TEST SOUND EMITTING DEVICE ............................................................................................................................................50

6. ST-031M POWER SUPPLY ......................................................................................................................................................51

7. TECHNICAL CHARACTERISTICS OF ST-031M .........................................................................................................................52

1. Introduction

ST-031M is a new generation multifunction counter surveillance device for detection and localization Special

Technical Means of Obtaining Secret Information (STMOSI) and for solving other information protection tasks

related to information protection technical measures effectiveness evaluation. ST031M is logic continuation of

the well-known multipurpose devices series „Piranha".

All features of previous models are incorporated into ST-031M:

ST-031M construction, delivery set, technical features and characteristics allow detection of wide range of

mostly dangerous STMOSI devices.

Technical possibilities of the device as whole and additional devices allow finding almost all of the most

dangerous physical fields used by STMOSI.

Independence from external power supplies allow autonomous operation and removes limitation of

device use.

Connection to PC allows controlling and information logging directly from computer screen.

ST-031M main differences from previous models ST-031 and ST-031P:

Selective wide band detector of electromagnetic field detector with adjustable bandwidth from 1 to 40

MHz is used for detection of STMOSI.

Selective HF detector bandwidth is wider than in previous models and is from 140 to 4420 MHz.

Wider band of wire lines scanning receiver 0,05-140 MHz.

ST-031M uses colour graphics display which increases informativeness of displayed information.

ST-031M user interface is intuitively understandable.

ST-031M comes in waterproof case, made of impact resistant plastic. Compact and comfortable styling

ensures safety of the device and its components during storage and transportation.

3 | P a g e

2. General characteristics of the device

2.1. Purpose and main features

Multifunctional searching device ST-031M is designed for the detection and localization of technical surveillance

measures and to identify the natural channels of information leakage, as well as for quality control of data

protection.

ST-031M maintains performance standards and compliance with the parameters of the technical conditions when

the supply voltage is not lower than 4.8V, the atmospheric pressure from 630 to 820 mm Hg, ambient

temperature of -5 to +350 ° C and humidity not exceeding 95%.

ST-031M allows us to perform following search tasks:

Discovery of the facts and determining the location of the radio-emitting devices, which creates a potentially

dangerous information leakage radiation. These means primarily include the following:

Radio microphones;

Telephone transmitters;

Radio-stethoscopes;

Concealed video cameras equipped with a radio channel for transmission of information;

Technical means or systems for spatial radio frequency radiation;

Beacons of the systems used for moving objects monitoring (e.g. people, transportation means, goods

etc.);

Unauthorized radio stations, radio handsets, and also telephones with radio-extension;

Radio modems and digital wireless access systems.

Identification of digital protocols used in the detected radio signals. Device is able to distinguish between signals

from the base station and signals from cellular phones.

Detection and localization of STM means which use conductive lines of various intended application, for

transmission of information, as well as the technical means of information processing, creating informative

crosstalk signals on the cable wires. Such means may include:

Devices transmitting intercepted information by AC 220V mains lines and capable of operating at

frequencies up to 30 MHz;

Technical means of imposing a linear high-frequency signals operating at frequencies above 150 kHz;

Devices transmitting intercepted information by subscriber telephone lines, the lines of fire and burglar

alarm systems with a carrier frequency above 20 kHz

Computers and other technical means of production, reproduction and transmission of information.

4 | P a g e

2.2. Packing and delivery set

Device ST-031M set is subject-oriented solution to the above search

tasks, to ensure versatility and autonomy of the work, as well as to

provide convenience and reliability of transportation and storage.

2.2.1. Packing

The device is made in a portable version. High-impact, waterproof

plastic carrying case NANUK-915 (Fig. 1) is used for transportation

and storage of the device. External dimensions of the case are

presented in Figure 2.

Safety during transportation and storage, as well as the convenience

of working with the device is provided by the original laying, which

consists of two parts: the upper (extracted from the case) and lower

(non-removable).

Layout of ST-031M accessories is presented in Figure 3.

Each component, supplied with ST-031M, has its own individual place.

To avoid mechanical damage, the device and its components must be

placed in accordance with the standard laying scheme.

Figure 1

Figure 2

Figure 3

5 | P a g e

2.2.2. Delivery set

ST-031M delivery set includes:

1. Ultrahigh frequency sensor (UWBD031M).

2. Conductive wire lines differential generator

3. Battery (for conductive wire lines differential generator) .

4. Attenuator.

5. Test sound emitting device.

6. Connecting cable of sound emitting device.

7. Induction converter (Magnetic field sensor).

8. Main controlling, processing and displaying unit.

9. "Crocodile" type clamps (2 pcs).

10. Multipurpose adapter for checking wire lines - BWLC031M.

11. Cable to connect BWLC031M adapter to telephone lines.

12. Multipurpose cable to connect BWLC031M adapter to wire lines.

13. High-frequency telescopic antenna.

14. Cable to connect BWLC031M adapter to electricity sockets for scanning receiver CH2.

15. Flash drive with software.

16. Cable to connect to a PC.

17. Adapter to connect BWLC031M adapter to the multi-wire cables.

18. Telephone adapters (2 pieces).

19. Cable connectors type RG45: 8х4; 8х6; 8х8.

20. Headphones.

21. Charger.

22. Carrying case.

23. User manual and warranty certificate.

Figure 4 shows the main components of ST-031M (numbering corresponds to the numbering of the figure 3).

Figure 4

6 | P a g e

2.3. Design of the main control, processing and display unit

The main unit is the main part of ST-031M. Figure 5 shows the

appearance of the front, top and bottom panels of the main unit.

At the top of the main unit are:

RF connector for antenna «CH 1"

jack for connecting scanning receiver adapter «CH 2"

jack for connecting sensors and adapters «CH 3"

handle power on / off and volume control «ON / OFF VOL»

The front of the main unit includes:

a. color graphic LCD display (320x240 pixels)

b. power indicator «PWR»

c. two windows of infrared transmitters for wireless

headphones;

d. 12 keys membrane keyboard.

Keys assignment:

F1 F2

F3 F4

Group function buttons. Their function varies

depending on the mode ST-031M and indicated

on the display directly above the button.

Buttons to change settings.

ENTER

Confirm the selected option button / mode.

ESC

Button to return to the previous mode, or

cancel the command.

FUNC

Additional functional button. Provides access to

additional features.

HELP

Contexts tips.

More detail button assignments will be presented in the description

of controls and indicators in Section 2.

Bottom panel has:

Headphone jack «PHONE»

Digital port for connection of external digital devices «EXT»

Socket for connecting to a PC «USB»

Socket to connect power supply / charger «DC5V»

In a bottom panel you can find a shield with serial number and

manufacturer name indicated.

Figure 5

7 | P a g e

3. ST-031M operation modes

Systemotechnical and software foundation, incorporated in the design and operation of the device algorithms

make it possible to apply it in the following modes:

selective high-frequency electromagnetic field detector (in the frequency range 140-4420 Mhz);

Scanning Analyser for wire lines (in the frequency range of 0.05-140 MHz);

Low-frequency signal amplifier (in the frequency range 0.02-100 kHz).

When connecting one or another external device, you must manually choose appropriate mode of operation.

3.1. Switching on ST-031M

Switching the device On/Off is made by rotating volume knob «ON / OFF VOL», located on the top panel (Fig. 5).

To access the "Select Channel" mode, press any button on a ST-031M keyboard.

3.2. Mode "Channel selection"

"Channel selection" is primary menu where user can

chose operating mode or set the system configuration.

The screen in the "Channel selection" is shown in

Figure 7.

The numbers indicated in the figure:

1. system information text

2. the name of the current mode

3. Battery charge indicator

4. time display (hh: mm)

5. menu “Chose mode”

6. the menu item "Channel 1"

7. the menu item "Channel 2"

8. the menu item "Channel 3"

9. the menu item "Settings"

10. currently selected menu item

11. function keys assignment

12. function name assigned to button F1

13. function name assigned to button F2

14. function name assigned to button F3

15. function name assigned to button F4

Figure 6

Figure 7

SELECT CHANNEL 00:00

Channel1 Channel 2 Channel 3

2 3 4

Setting

12 13 14 15

Channel Hz 1 (140...4 4 2 0 М )

Channel Hz 3 (0,0 2 ...100К )

Setting

Channel Hz 2 (0,0 5 ...30М )

Figure 7

8 | P a g e

Available functions

Key

Menu item selection



Activating selected mode

ENTER

Available modes

"Channel 1" high frequency selective detector

(140- 4200 MHz)

F1 or menu button pos.6 Fig.7

"Channel 2" scanning receiver (0.05 ... 30 MHz)

F2 or menu button pos. 7 Fig.7

"Channel 3" low frequency amplifier

F3 or menu button pos. 8 Fig.7

"Settings" (time, date, language, infrared headset)

F4 or menu button pos. 9 Fig.7

3.2.1. "Settings" mode

In the "Settings" menu user can set following system parameters:

Time

Date

Language menu

Enable / disable the IR headset.

Setting system time

Press button F4 or chose appropriate menu item in the "Channel

Selection" mode.

To adjust the time select menu item in the box that says „Time“ and

presses ENTER.

In the window that appears, chose between hours or minutes (Fig. 9)

using the buttons LEFT or RIGHT. Use buttons UP or DOWN to set the

desired value. Confirm set time by pressing button ENTER.

If you press the ESC button, the unit exit without saving your changes.

New settings will be stored in memory even when power is turned

off.

Setting system date

To adjust the time select menu item in the box which says "Date" and

press ENTER.

In the window that appears, set the required parameters (similar to

how setting time)

Confirm set values by pressing ENTER. Tto return to the Mode menu

"Settings" press button ESC.

Figure 8

Figure 9

Figure 10

SETTINGS 00:00

Date

Язы к/ Language ENG

IR-headset

Time

Table des matières

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur