SECOP 101N08 Series Manuel utilisateur
CONTROLLER FOR
BD COMPRESSORS
Flexible control settings
TOOL COOL
4
OPERATING INSTRUCTIONS
101N08xx Series, 12-24 V DC
WE HAVE MORE THAN 30
YEARS OF EXPERIENCE,
DEVELOPING DIRECT
CURRENT COMPRESSORS
AND HELPING CUSTOMERS
BENEFIT FROM THE
OPPORTUNITIES OF
MOBILE REFRIGERATION
TECHNOLOGY.
WITH A DEEP INSIGHT OF
THE USAGE ACROSS VARIOUS
APPLICATIONS WE HAVE
EARNED A POSITION AS
MARKET LEADER, WORKING
WITH OEM-CUSTOMERS .
www.secop.com SETTING THE STANDARD
2
Operating
Instructions
TABLE OF CONTENTS
1. Introduction ..............................................................................................3
1.1 Applications ...............................................................................................3
1.2 Capability ...................................................................................................3
1.3 Functions ...................................................................................................3
1.4 Programming Interface .............................................................................3
2. Installation ..............................................................................................4
2.1 Checklist ....................................................................................................4
2.2 Connect Cables .........................................................................................5
2.3 Install and Configure Software ...............................................................11
3. TOOL4COOL® Software Interface ............................................................. 27
3.1 User Interface ..........................................................................................27
3.2 Operation .................................................................................................27
4. Parameters ............................................................................................ 28
4.1 Parameter Overview ................................................................................28
4.2 Description of Parameters ......................................................................36
4.3 Error and Event Logs ..............................................................................46
5. Ordering ............................................................................................ 47
3
Operating
Instructions
The Secop BD compressors with 101N08xx Series 12-24V DC are designed for use in:
• Comfort cooling in parking anti-idle applications
• Spot and comfort cooling in buses, golf carts, smaller boats, forklifts, campers etc
• Cooling of switchboards and batteries in radio stations for cellular phones
• Mobile refrigeration applications
• Air cargo cooling
• Mobile cooling boxes of volume up to 1000L
• Mobile refrigeration applications
For R134a compressor variants:
One application module can control either single or twin compressor configurations.
The cooling capacity of the single compressor configuration is approx. 900 Watt @ Pe/Pc
~+15/+55°C
The cooling capacity of the twin compressor configuration is approx. 1800 Watt @ Pe/Pc
~+15/+55°C
The system is able to operate in ambient temperatures up to +55 ºC.
The operating conditions are High Back Pressure (HBP).
For R404A/R507 compressor variants:
The cooling capacity of the compressor is approx. 380 Watt @ Pe/Pc ~-5/+55°C
The system is able to operate in ambient temperatures up to +55 ºC.
The operating conditions are Low Back Pressure (LBP).
The main functions of the controllers are:
• Operation using either 12 V DC or 24 V DC
• Simultaneous and independent control of two compressors in twin configuration
• ECO function to optimize compressor speed for minimum power consumption
• Detailed error log
• Event log
• Motor / Compressor speed control
• Thermostat control (ON / OFF or electronic via NTC temperature sensor)
• Condenser fan control
• Evaporator fan control
• Communication interface
• Monitoring function
• Battery protection functions
• Main Switch
• Log of specific parameters
• Optimization of specific parameters via PC software before commencing mass production
The controller can be accessed using either
• The Secop software tool Tool4Cool® LabEdition, or
• A custom interface. Please contact Secop for further information regarding custom interfaces
1.
INTRODUCTION
1.1
Applications
1.2
Capability
1.3
Functions
1.4
Programming
Interface
4
Operating
Instructions
Installation involves the following steps:
• Checklist
• Cable connection
• Software installation and configuration
Ordering: See section 5.0
BD Controller 101N08xx Series 12-24 V DC
(modules and cables)
Image shows compressor/application
modules 101N08xx-series in twin
compressor configuration with
communication cable asembly
Tool4Cool® LabEdition software download:
www.secop.com/tool4cool.html
NTC temperature sensor
(alternative: mechanical thermostat)
Product key for BD compressor controller - on request -
Alternative gateways
Secop Bluetooth® gateway with
USB power supply
• Gateway
• USB power supply
• Bluetooth® connection cable
(must be ordered separately)
Secop One Wire/LIN gateway with
connection cables
• Gateway
• One Wire/LIN gateway
communication cable
• USB 2.0 A/B cable
Check that you have the following:
2.1
Checklist
2.
INSTALLATION
5
Operating
Instructions
Legend for 2.1 & 2.2
A. Application module 101N0820
B. Compressor module 101N0800, 12 V DC / compressor module 101N0810, 24 V DC
C. Line cords
D. Single or twin compressor communication cable assembly
1. Mounting screws
2. Battery
3. Fuse
4. Main switch
5. Evaporator fan
6. Condenser fan
7. Mechanical thermostat
8. NTC temperature sensor (electrical thermostat), alternative: mechanical thermostat
9. NTC auxiliary temperature sensor
10. Compressor(s)
11. Secop One Wire/LIN gateway communication interface
12. Modbus-compatible device
13. Secop Bluetooth® gateway communication interface
See Intructions DES.I.100.H_.02 for details.
2.2
Connect Cables
6
Operating
Instructions
2.2.1 Single compressor configuration, 12 V DC or 24 V DC, connect cables as shown:
With Display Module
With One Wire Gateway
7
Operating
Instructions
Wiring diagram
With Bluetooth® Gateway
8
Operating
Instructions
2.2.2 Twin compressor configuration, 12 V DC or 24 V DC, connect cables as shown:
With Display Module
With One Wire Gateway
9
Operating
Instructions
Wiring diagram
With Bluetooth® Gateway
10
Operating
Instructions
2.2.3 Connection between PC, one-wire gateway, and application module
Connect cables as shown:
Table des matières
Autres manuels SECOP Contrôleurs
