Seating Matters Milano Manuel utilisateur
Instruction Manual
MilanoTM
This Instruction Manual is frequently updated to ensure safe use of your chair.
Visit seatingmatters.com where you can nd a free copy of the most up to date version.
1
Contents
2Technical Specication
5Operating Instructions
5Seat Cushion
6Tilt in Space (Manual Option)
7Back Angle Adjustment (Manual Option)
8Seat Depth Adjustment
9Seat Width Adjustment
10 Leg Elevation (Manual Option)
11 Negative Angle Leg Rest (Manual Option)
12 Footplate Height
13 Footplate Angle
14 Back Height Adjustment
15 Anterior & Posterior Tilt
16 Chair Movement
18 Chair Function (Motorised Option)
19 Charging Your Chair
20 Cleaning Instructions
21 Safety Instructions
22 Maintenance & Servicing
23 Recycling Policy
24 Warranty
25 Intellectual Property
2
MilanoTM
Technical
Specication
3
A
B
C
EF
G
H
L
D
I
Basic Dimensions
AOverall Height
BBack Height
CSeat Height
DOverall Length
1300mm / 51"*
770mm / 30"
540mm / 21"*
930mm / 36.5"
*Height measurements are based on 100mm castors.
Footplate Height Adjustments (From seat)
EHigh
FLow
400mm / 16"
580mm / 23"
Seat Depth (L)
Seat Position 1
Seat Position 2
Seat Position 3
400mm / 16"
450mm / 18"
500mm / 20"
Available Seat and Overall Width
G
400mm / 16"
450mm / 18"
500mm / 20"
H
700mm / 27.5"
750mm / 29.5"
800mm / 31.5"
Clearance Height
I 130mm / 5"*
*Height measurement is based on 100mm castors.
Arm Height
J 750mm
*Height measurement is based on 100mm castors.
Recline and Tilt Angles
ii (Back Angle Recline)
Manual
100° - 140°
40° range
Motorised
100° - 120°
20° range
iii (Leg Rest Angle)
Position 1 90° - 160°
Position 2 (Neg Angle) 75° - 145°
iv (Tilt in Space)
From 5° forward (anterior) tilt
to 35° backward (posterior) tilt
Chair weight unloaded
8 Stone / 52 Kg / 114lb
Patient weight limit
25 Stone / 159 Kg / 364lb
ii
iii
iv
J
4
Terminologies
Patient
The person sitting in the chair.
User
Competent person with responsibility for the persons sitting in the chair as well as the
suitability of the equipment for the Patient. The User is responsible for checking the chair
for faults during the course of its use.
All instructions must be read and understood before the chair may be used.
5
Seat Cushion
Removal and tting of the modular
Seating Matters cushion (g.1).
The underside of the Seating Matters
cushion is upholstered with non-slip
material, which creates a friction contact
when the chair is occupied. To t the
cushion correctly, place the cushion onto
the seat base of the chair, with the non-slip
underside of the cushion facing downwards
(g.1a). The rear, zipped end of the cushion
should be facing towards the back of
the chair (g.1b). See cushion label for
orientation. To remove the cushion, simply
lift it out from the chair.
(g.1)
(g.1a) (g.1b)
Back
Side
Internal
Front
Operating
Instructions
Correct tment of the Seating Matters cushion is important as the structure of the foam
allows good immersion ONLY when tted as instructed above.
6
For motorised option, see page 18.
To adjust the tilt angle of the chair (g.2).
From the back of the chair, place both
hands on the push handle and locate the
left release lever (g.2a) with your
left hand. To tilt the chair, close your left
hand pulling the lever towards you (g.2b).
With the lever engaged, tilt the chair to the
required angle and release the lever again
to lock the tilt in this position.
Back
Side
Internal
Front
Tilt in Space (Manual Option)
(g.2)
(g.2a) (g.2b)
7
For motorised option, see page 18.
To adjust the back recline of the
chair (g.3).
From the back of the chair, place both
hands on the push handle and locate the
right release lever with your right
hand (g.3a). To recline the back of the
chair, push the lever with your right hand
(g.3b), with the lever engaged, recline the
back to the required angle and release the
lever again to lock the back in this position.
Back Angle Adjustment (Manual Option)
(g.3)
(g.3a) (g.3b)
Back
Side
Internal
Front
8
To adjust the seat depth of the chair (g.4).
*Some tools are required to carry out
this adjustment.
Using a 17mm spanner, remove the locking
nut and the safety washer (g4a). Do this
on both sides of the chair. Then move the
back to the desired position by sliding it
backward or forward through the arched
slots. (g.4b) Engage the safety washer and
tighten the locking nut securely.
Seat Depth Adjustment
*There are three options for seat depth.
16" 18" 20"
(g.4)
(g.4a) (g.4b)
X
L
l
17mm
Back Side
Internal
Front
Autres manuels pour Milano
2
Table des matières
Autres manuels Seating Matters Équipement médical
