Sealey MIG/N315 Manuel utilisateur

INSTRUCTIONS FOR:

MIG TORCH EURO CONNECTOR

PART Nos: MIG/N315, MIG/N325, MIG/N336,

MIG/N415, MIG/N425, MIG/N436

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you

years of trouble performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

3. TIP & SHROUD REMOVAL

■ BEFORE USE, ALWAYS ENSURE THAT YOU ARE FAMILIAR WITH THE SAFETY WARNINGS AND INSTRUCTIONS FOR THE

WELDER TO WHICH THIS TORCH IS TO BE FITTED.

DO NOT exceed the rated current of the torch.

DO NOT use if any part of the torch, cable or connector is damaged in any way. Use only genuine Sealey replacement parts to effect

repairs.

DO NOT allow the cable to come into contact with any sharp or hot items.

 Alwaysusethecorrectpersonalprotectiveequipmentasspeciedinthewelderinstructions.

MIG/N315, MIG/N415 MIG/N336, MIG/N436

Professional MIG welding torches with contoured grip, hanging hook and heat-proof cable. Fitted with Euro connection enabling a quick and simple

plug connection to welder. No wiring means torch can be disconnected and stored safely when not being used.

Model No: .......MIG/N315........MIG/N325 ........MIG/N336.......MIG/N415 ...... MIG/N425 ....... MIG/N436

Rated Current: ....180A............230A............250A...........290A........... 340A ............350A

Wire Diameter:....0.6-1mm .........0.8-1.2mm .......0.8-1.2mm ......0.8-1.2mm ...... 0.8-1.6mm........1-2.4mm

Length:..........3mtr ............3mtr ............3mtr ...........4mtr ........... 4mtr.............4mtr

Torch Type: ......MB15 ...........MB25 ...........MB36 ..........MB15 .......... MB25 ...........MB36

MIG/N325, MIG/N425

ENSURE THAT THE TORCH IS COOL AND THAT THE WELDER IS DISCONNECTED FROM THE POWER SUPPLY.

3.1. MIG/N315, MIG/N415, MIG/N325, MIG/N425 (g.1)

3.1.1. To remove the shroud: turn the shroud clockwise and pull away.

3.1.2. To remove the tip: unscrew the tip in an anticlockwise direction.

3.1.3. To replace the tip: screw back in and tighten.

3.1.4. To replace the shroud: simply push the shroud back over the spring.

3.2. MIG/N336, MIG436 (g.2)

3.2.1. To remove the shroud: pull the shroud forward to release.

3.2.2. To remove the tip: unscrew the tip in an anticlockwise direction.

3.2.3. To replace the tip: screw back in and tighten.

3.2.4. To replace the shroud: push back over the torch head.

g.1

g.2

Original Language Version MIG/N315,MIG/N325,MIG/N336, Issue: 1- 28/02/14

MIG/N415,MIG/N425,MIG/N436

Jack Sealey Limited

WEEE Regulations.

Dispose of this product at the end of its working life in compliance

with the EU Directive on Waste Electrical and Electronic Equipment.

When the product is no longer required, it must be disposed of in an

environmentally protective way. Contact your local solid waste

authority for recycling information.

Environmental Protection.

Recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycling centre and disposed of in a manner which

is compatible with the environment.

Ensure that the welder is disconnected from the power supply before connecting the torch.

4.1. Linethemaleandfemaleconnectorupcarefullyandinsertthetorchconnections.(g.3)

4.2. Screwtheoutercollararoundthetorchontotheweldertorchconnectortoxinplace.(g.4)

4.3. See the welder instructions for wire feed details.

4. COUPLING THE EURO CONNECTOR

g.3

g.4

NOTE: I

t is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business

Park, Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version MIG/N315,MIG/N325,MIG/N336, Issue: 1- 28/02/14

MIG/N415,MIG/N425,MIG/N436

Jack Sealey Limited

Ce manuel convient aux modèles suivants

Autres manuels Sealey Accessoires de soudage

Sealey

Sealey SGA3.V2 Manuel utilisateur

Sealey

Sealey SWH189 Manuel utilisateur

Sealey

Sealey GCSC219 Manuel utilisateur

Sealey

Sealey SWT1120 Manuel utilisateur

Sealey

Sealey MIG/LITE Manuel utilisateur

Sealey

Sealey SSP6 Manuel utilisateur

Sealey

Sealey PWH599 Manuel utilisateur

Sealey

Sealey Siegen Tools S01001.V2 Manuel utilisateur

Sealey

Sealey PWH599 Manuel utilisateur

Sealey

Sealey SGA1.V4 Manuel utilisateur

Sealey

Sealey PWH620 Manuel utilisateur

Sealey

Sealey SGA1.v3 Manuel utilisateur

Sealey

Sealey PWH601 Manuel utilisateur

Sealey

Sealey PWH599 Manuel utilisateur

Sealey

Sealey BTR4.V3 Manuel utilisateur

Sealey

Sealey Siegen Tools S01000.V2 Manuel utilisateur

Sealey

Sealey VSAC135 Manuel utilisateur

Sealey

Sealey SHADE 10 Manuel utilisateur

Sealey

Sealey PWH399 Manuel utilisateur

Sealey

Sealey PWH616 Manuel utilisateur

Sealey

Sealey WFS94X Manuel utilisateur

Sealey

Sealey SGA3 Manuel utilisateur

Sealey

Sealey PWH620.V2 Manuel utilisateur

Sealey

Sealey PWH610 Manuel utilisateur

Manuels Accessoires de soudage populaires d'autres marques

Lincoln Electric

Lincoln Electric LT-7 Tractor Manuel utilisateur

Weco

Weco Trolley R Manuel utilisateur

Cornwell Tools

Cornwell Tools MMWC1 Manuel utilisateur

Dohle

Dohle ExOn2A Manuel utilisateur

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Manuel utilisateur

3M Speedglas 9100 Series Manuel utilisateur

Miller Electric

Miller Electric OM-842 Manuel utilisateur

Miller

Miller A-200 Series Manuel utilisateur

Abicor Binzel

Abicor Binzel ABIMIG WT Series Manuel utilisateur

optrel

optrel lifeflip autopilot Manuel utilisateur

Miller

Miller MIGmatic M-25 Manuel utilisateur

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Manuel utilisateur

Abicor Binzel

Abicor Binzel xFUME PRO Manuel utilisateur

iWeld

iWeld NORED EYE Manuel utilisateur

Sthor

Sthor 74483 Manuel utilisateur

Leister

Leister TWINNY T7 Manuel utilisateur

Miller

Miller I-22 CE Manuel utilisateur

LAHTI PRO

LAHTI PRO L1540400 Manuel utilisateur