Sealey VS0033 Manuel utilisateur

5PC COOLING SYSTEM PRESSURE TEST KIT

MODEL NO: VS0033

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this

equipment.

9Read instructions thoroughly to ensure safe and effective use.

IMPORTANT! Read instructions in conjunction with vehicle or equipment manufacturer’s workshop manual.

9Maintain the apparatus in good condition (use an authorised service agent). Before each use check condition of each component. If any

component is damaged, replace immediately. Use genuine parts only. Unauthorised parts may not function correctly and will invalidate

the warranty.

9Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.

WARNING! Always wear approved eye (or face) and hand protection when pressure testing.

9Keep children and unauthorised persons away from the working area.

8DO NOT operate the pressure tester when you are tired or under the influence of alcohol, drugs or intoxicating medication.

8DO NOT clean the equipment with solvents or other harsh chemicals.

8DO NOT use the pressure tester for any purpose other than that for which it is designed.

9When not in use return parts to the case, and store it in a safe, dry, childproof location.

2. INTRODUCTION

Capless tester uses cone adaptor system to seal and pressurise the cooling system. Adaptors may be used to replace both screw and bayonet

type cap ttings. Kit includes pump with gauge and four system adaptors for use on a wide range of vehicle applications.

3. SPECIFICATION

Model No:...........................................................................................VS0033

Nett Weight: ........................................................................................ 2.84Kg

4. CONTENTS

Part Description

VS0033.01 Cone adaptor 17-24mm

VS0033.02 Cone adaptor 28-31.5mm

VS0033.03 Cone adaptor 37-39.5mm

VS0033.04 Cone adaptor 47-48.5mm

VS001.V3-P Pressure hand pump

VS0033 Issue 2 (HF) 29/04/19

Original Language Version

Refer to

instructions

Wear eye

protection

Wear protective

gloves

5. OPERATION

5.1. Follow the manufacturer’s instructions for removal of filler cap, use a thick cloth or gloves

and arm protection if the system is known to be hot and or under pressure.

5.2. Select the correct adaptor by first measuring or gauging by eye the filler neck diameter.

5.3. Ensure the sealing conical nozzle is in its “relaxed” condition by visually inspecting the

hand wheel incremental cam lobes. The gap between handwheels will be at their closest.

5.4. Insert the conical nozzle end of adaptor and ensure a partial seal.

5.5. Adjust seal compression integrity by gripping the handwheel nearest the nozzle and

rotating the top handwheel clockwise until an adequate seal is obtained. Resistance will

increase with seal compression via the incremental cam lobes.

5.6. Attach the quick coupler of the pump hose on to the conical adaptor (fig.1).

NOTE! Due to the design of the internal pump seal, a vigorous pumping action is required to

activate the seal and pressurise the system. A light or slow pumping action will prove

ineffective. The larger the air space within the cooling system being tested, the

more vigorous the initial pumping should be. By filling the cooling system and therefore

reducing the airspace within, less effort will be needed to pressurise it.

5.7. Pump the system until the pressure gauge indicates approximately 15 psi.

5.8. If gauge pointer remains stationary for one minute it will indicate that the cooling system is

in good working order.

5.9. If the pointer falls, it indicates that the system has a leak resulting in loss of pressure.

5.10. Check the system for water leaks and, if located, repair accordingly.

5.11. If there is pressure loss but no external water leakage check condition of the head gasket.

5.12. Re-test to ensure the repaired system is in good working order.

5.13. Once the test is complete, release the air pressure by depressing the spring loaded pressure relief valve (fig.1).

5.14. Disconnect the quick coupler (fig.1).

5.15. Remove the conical adaptor assembly by firstly gripping the handwheel nearest the nozzle and secondly relaxing the seal

compression by rotating the top handwheel counter clockwise fully up to mechanical stop.

Quick coupler

Pump plunger

Pressure relief valve

Pressure gauge 0-35psi (0-2.5bar)

VS001.V3-P

Flexible hose

g.1

VS0033 Issue 2 (HF) 29/04/19

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

VS0033 Issue 2 (HF) 29/04/19

Original Language Version

6. MAINTENANCE

6.1. Always keep the rubber cones clean and free of oil and grease. Clean them regularly with a non-aggressive cleaner, ensuring dry

before storage.

6.2. In order to preserve elasticity, DO NOT expose rubber cones to sunlight over an extended period of time.

ØA

ØB

C max relaxed

C min expanded

Ø17

Ø37

64 max relaxed

54 min expanded

Ø28

Turn handwheel clockwise to

expand rubber cone to seal tight.

Incremental compression

cam lobes (shown in fully

relaxed position)

Grip handwheel whilst

expanding rubber cones.

Part No

VS0033.01 (only) Part Nos

VS0033.02

VS0033.03

VS0033.04

Model "A" min "A"max "B" "C"max "C"min

VS0033.02 28 31.5 41 74.5 64

VS0033.03 37 39.5 50 74.5 64

VS0033.04 47 48.5 60 74.5 64

Ø24

Expanded fully

Male connector

Rigid plastic (POM)

handwheels

Flexible rubber nozzle

Conical expanding adaptors

Incremental compression

cam lobes (shown in fully

expanded position)

Table des matières

Autres manuels Sealey Équipement de test

Sealey

Sealey CT955 V3 Manuel utilisateur

Sealey

Sealey TA130.V2 Manuel utilisateur

Sealey

Sealey VS0275 Manuel utilisateur

Sealey

Sealey VS4021 Manuel utilisateur

Sealey

Sealey AUTO SERVICE BT91/7C Manuel utilisateur

Sealey

Sealey MC105 Manuel utilisateur

Sealey

Sealey VSE300D Manuel utilisateur

Sealey

Sealey VS925 Manuel utilisateur

Sealey

Sealey TA120 Manuel utilisateur

Sealey

Sealey BT2011 Manuel utilisateur

Sealey

Sealey PP100.V2 Manuel utilisateur

Sealey

Sealey VS211.V2 Manuel utilisateur

Sealey

Sealey BT91/7.V4 Manuel utilisateur

Sealey

Sealey VS0031.V3 Manuel utilisateur

Sealey

Sealey BT2002.V2 Manuel utilisateur

Sealey

Sealey VS027.V2 Manuel utilisateur

Sealey

Sealey BT2003.V4 Manuel utilisateur

Sealey

Sealey BT101 Manuel utilisateur

Sealey

Sealey GT117 Manuel utilisateur

Sealey

Sealey VS2058.V2 Manuel utilisateur

Sealey

Sealey AUTO SERVICE LINE TA125 Manuel utilisateur

Sealey

Sealey VS211 Manuel utilisateur

Sealey

Sealey TA4000 Manuel utilisateur

Sealey

Sealey VS027.V3 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur