Sistemi elettronici
di Aperture Porte e Cancelli
Sistemi elettronici
di Aperture Porte e Cancelli
SEA S.r.l.
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
www.seateam.com
ARM
FITTING AND CONNECTION INSTRUCTIONS
DECLARATIONOFCONFORMITY
SEAdeclaresunderitsresponsibilitythattheproducts
ARM
meetstheessentialrequisitesprovidedforbythefollowingEuropeanDirectiveandfollowingchanges:
89/392/CEE(MachineDirective)
89/336/CEE (ElectromagneticCompatibilityDirective)
73/23/CEE(LowTensionDirective)
SAFETYPRECAUTIONS:
All electrical work should conform to current regulations.A16A 0,030Adifferential switch must be incorporated into the source of
the operators main electrical supply and the entire system properly earth bonded. Always run mains carrying cables in separate
ductstolowvoltagecontrolcablestopreventmainsinterference.
INTENDEDUSE:
ARMoperatorhasbeendesignedtobeusedonlyfortheautomationofswinggates.
SPAREPARTS:
Toobtainsparepartscontact:
SEAS.r.l.-ZonaInd.leS.Atto,64020S.NicolòaTordino-Teramo-ITALIA
SAFETYANDENVIRONMENTALCOMPATIBILITY:
Don’twasteproductpackingmaterialsand/orcircuits.
Whenbeingtransportedthisproductmustbeproperlypackagedandhandledwithcare.
MAINTENANCEANDOUTOFSERVICE:
ThedecommissionandmaintenanceofARMmustonlybecarriedoutbyspecialisedandauthorisedpersonnel.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY
IMPROPERUSEOFTHISPRODUCT.
SEAreservestherighttodochangesorvariationsthatmaybenecessarytoitsproductswithnoobligationtonotice.
RISKEXAMINATION
ThepointspointedbyarrowsinFig.18 arepotentiallydangerous.
The installer must take a close risk examination to prevent
crushing, conveying, cutting, grappling, trapping so to guarantee
asafeinstallationforpeople,thingsandanimals
().
Re. Laws in force in the country where the installation has been
made
Fig. 18
ENGLISH
REV 05 - 10/2007
