ScoutGuard SG550-12mHD Manuel utilisateur
Infrared Digital Scouting Camera
User’s Manual
Pocket Camera SG550-12mHD
Content
1 Instruction..............................................................1
1.1 Camera Body Interface..................................1
1.2 General Description......................................1
1.3 Shooting Information Display ..................... 2
1.4 Saving Images or Videos.............................. 3
1.5 Cautions ....................................................... 3
2 Quick Start Guide ................................................. 5
2.1 Power Supply ............................................... 5
2.2 Insert the SD card ....................................... 5
2.3 Power on and Entering into ON Mode........ 6
2.4 Custom Settings .......................................... 6
2.5 Manual Capturing ....................................... 7
2.6 View Images or Videos ................................ 7
2.7 Delete Images or Videos.............................. 7
2.8 Power Off .................................................... 7
3 Item Settings......................................................... 8
3.1 Camera Menu ..............................................8
3.2 Default Setting .......................................... 10
4 Trouble Shooting ................................................. 11
5 PIR Detection Zone............................................. 12
6 Technical Specifications ..................................... 13
7 Parts List ............................................................. 14
SG550-12mHD 1 Instruction
Page 1
1 Instruction
1.1 Camera Body Interface
1.2 General Description
This camera, a digital scouting camera, is a
surveillance camera working automatically. It can
be triggered at once by any movement of human (or
animals) in a certain region of interested (ROI)
monitored by a high sensitive Passive Infrared (PIR)
motion sensor, and then automatically captures
high quality pictures (up to 12M pixels) or records
video clips (720P HD) according to default settings
or preset customer settings.
It takes color pictures or videos under sufficient
SG550-12mHD 1 Instruction
Page 2
daylight. While at dark night, the built-in infrared
LEDs function as flash light, the camera then takes
clear pictures or videos
It is resistant against water and snow for outside
use. Furthermore, the camera can be used as a
portable digital camera. Pictures or videos can be
taken manually by pressing SHOT on the control in
TEST mode (The wired control needs to be
connected).
1.3 Shooting Information Display
There is a wired control primarily used for customer
settings. When the camera is turned on (with wired
control connected to the USB connector), the
current settings will be displayed on the screen.
SG550-12mHD 1 Instruction
Page 3
1.4 Saving Images or Videos
The camera uses a standard SD(Secure Digital)
memory card to save images(in .jpg format) and
videos(in .avi format). SD and SDHC(High Capacity)
cards up to 32GB are supported. Before inserting
the SD card be sure that the SD card is unlocked.
Note: without SD card inserted, the camera will
turn off automatically.
1.5Cautions
★The working voltage of the camera is 6V. The
camera is supplied by eight AA batteries.
★Please install batteries according to shown
polarity.
★It is recommended to format the SD card by the
camera when used at the first time.
★Please insert the SD card when the power switch
is at OFF position before testing the camera. The
camera has no internal memory for saving images
SG550-12mHD 1 Instruction
Page 4
or videos.
★Please do not insert or take out the SD card when
the power switch is at ON position.
★The camera will be in USB mode when connected
to a USB port of a computer. In this case, the SD
card functions as a removable disk.
★In the TEST mode(insert the control into the USB
interface then switch the camera at ON position),
the camera will shut down automatically after 3
minutes if no operation is done. Please turn on
the power again if you want to continue to work
with the control.
SG550-12mHD 2 Quick Start Guide
Page 5
2 Quick Start Guide
2.1 Power Supply
Use 8 AA batteries or 6V external power supply to
supportthecamera.
Use high-capacity and high-performance alkaline
betteries(recommended), rechargeable Lithium
batteries or rechargeable Nimh batteries.
Caution: Risk of explosion if battery is replaced by
an incorrect type. Also dispose of used batteries
according to the instructions.
Correct Disposal of this product. This marking
indicates that this product should not be disposed
with other household wastes throughout the EU. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
2.2 Insert the SD card
Open the bottom cover, insert SD card into the
card slot. Please note that the SD card is on the
“write” (not locked) position otherwise the camera
will not function correctly. The camera itself has no
internal memory for saving images or videos.
SG550-12mHD 2 Quick Start Guide
Page 6
2.3 Power on and Entering into ON Mode
Before switching on, please pay attention to the
follows:
1. Avoid temperature and motion disturbances in
front of the camera such as big leaf, curtain,
air-conditioner, air outlet of the chimney and
other heat sources to prevent from false
triggering.
2. The height from ground for placing the camera
should vary with the object size appropriately. In
general, one to two meters are preferred.
In TEST mode, it requires to connect the remote
control then to do further customizing settings,
when the user complete the settings, it requires to
unplug the control to enter into normal use, that is,
if the remote control still be connected with the
camera, the camera will not work. The camera (the
control must be unplugged when in ON mode) will
take pictures or videos automatically according to
the default settings or preset customer settings.
After switching on the camera, the motion
indication LED (red) will blink for about 10s. The
10s is a buffering time before autonomic capturing
photos or videos, e.g. for closing and locking the
bottom cover, mounting the camera and walking
away.
2.4 Custom Settings
Press MENU on the remote control to enter into
menu settings. The camera can be adjusted to
SG550-12mHD 2 Quick Start Guide
Page 7
manually customize the camera settings which
displayed on the LCD screen of the remote control.
2.5 Manual Capturing
Press SHOT to manually capture photos or record
videos. It is also SHOT key to stop the manual
capturing of the video.
2.6 View Images or Videos
Press OK to view images, the latest image will be
shown on the LCD screen on the control. Press UP
to view the previous image and press DOWN for the
next. Please note that video cannot be played on the
LCD screen and only thumbnail of the video is
showed.
2.7 Delete Images or Videos
Choose the image or video to be deleted when
viewing，then pressMENU to choose delete one
or all. Then press MENU to cancel or OK to delete.
2.8 Power Off
Slide the power switch to OFF position to power off
the camera. Please note that even in the OFF mode,
the camera still consumes a small amount of battery
power. Therefore, please remove the batteries if the
camera is not in use for a length of time.
SG550-12mHD 3 Item Settings
Page 8
3 Item Settings
3.1 Camera Menu
To view the camera settings menu, press MENU on
the remote control. With the remote, use “▲” or
“▼” key to select the sub-menu, use “►” key to
select the different options. Press OK to save the
settings and MENU to exit.
After changing EACH setting in TEST mode you
must press OK, otherwise the camera will stay at the
default setting.
Setting
Items
Description
Camera
Mode
There are three camera modes: Photo,
Video or Pic+Video. You can enter the
Setup interface to set the camera mode or
use shortcut key to switch the camera
mode.
Via shortcut key: press “ ” key to set to▲
Video and press “ ” key to set to Photo▼
in TEST mode.
Set
Clock
Set camera date and time. You can
change the date and time of the device by
setting this parameter when necessary,
e.g., after every battery change. The date
format is month/day/year, the time
format is hour: minute: second. The valid
value for year is between 2009 and 2050.
Table des matières
Autres manuels ScoutGuard Caméra de repérage
ScoutGuard
ScoutGuard SG880MK-18mHD Manuel utilisateur
ScoutGuard
ScoutGuard SG-660 Manuel utilisateur
ScoutGuard
ScoutGuard SG880MK-8M Manuel utilisateur
ScoutGuard
ScoutGuard MG984G-36M Manuel utilisateur
ScoutGuard
ScoutGuard SG880MK-8M Manuel utilisateur
ScoutGuard
ScoutGuard SG560-8M Manuel utilisateur
ScoutGuard
ScoutGuard SG968K-10M Manuel utilisateur
ScoutGuard
ScoutGuard HC-SG550M Manuel utilisateur
ScoutGuard
ScoutGuard SG550B Manuel utilisateur
ScoutGuard
ScoutGuard SG-660 Manuel utilisateur
ScoutGuard
ScoutGuard SG565FV Manuel utilisateur
ScoutGuard
ScoutGuard SG880MK-12mHD Manuel utilisateur
ScoutGuard
ScoutGuard G560P-8M Manuel utilisateur
ScoutGuard
ScoutGuard SG570-6M Manuel utilisateur
ScoutGuard
ScoutGuard SG550 Series Manuel utilisateur
ScoutGuard
ScoutGuard SG880MK-8mHD Manuel utilisateur
