Programmable Features*
The security system is microprocessor controlled and this enables you to benefit
from a number of enhanced user-friendly convenience and security features. If you
wish to have any of these enabled, consult your dealer. These include:
• Auto-Arm can automatically arm the security system a timed period after
the last door is closed, if the system is accidently left disarmed. This feature
can also include locking if required.
• Auto-Rearm can automatically re-arm the security system (and re-lock the
doors) if a door is not opened in a timed period following the system having
been disarmed.
• Closed Loop Protection Built in accessory protection circuit.
• Door Open, Closed Loop & Auto-Arm Warning Bleeps will alert you, with a
series of bleeps when first armed, that a door, boot or the bonnet is open,
the Closed Loop Protection circuit is broken or Auto-Arm is selected.
• Extend CDL Lock Output this feature enables the CDL Lock Pulse to be
extended when the Radio Key button remains held on arming (up to a
maximum of 26 seconds). This feature provides an alternative method to
operating Total Closure on vehicles equipped with a Total Closure circuit
that can be operated in this way.
• Headlamp Illumination provides an output to illuminate the vehicle’s
headlamps on arming (and disarming if required) to illuminate your way
from the vehicle.
• Interior Lamp Illumination provides an output to illuminate the vehicle’s
interior lamp on disarming the system.
• Key Theft Protection with this feature selected, even if the vehicle’s keys
and Radio Key are used to disarm the alarm system the vehicle can only be
started after entering the correct 4-digit PIN into the Keypad.
• Safety Lock/Unlock can automatically lock the doors and boot when the
ignition is turned on, unlocking them again when the ignition is turned off.
• Total Closure this feature can provide an output when arming the system.
The output can be operated in one of 2 ways; “Timed” in which case the
output always occurs upon arming for a preset period, or “Hold Down”
where the output only occurs when, and for the period that, the Radio Key
button remains depressed (up to a maximum of 26 seconds).
• Total Open/Boot Release this feature can provide an output when
disarming the system. The output can be operated in one of 2 ways; “Timed”
in which case the output always occurs upon disarming for a preset period,
or “Hold Down” where the output only occurs when, and for the period that,
the Radio Key button remains depressed (up to a maximum of 26 seconds).
• 2nd Stage Unlock This feature allows the user to only unlock all the vehicle’s
doors and boot when specifically required. Normal disarming of the system
provides a Standard CDL Unlock output that can be configured to unlock
the driver’s door only, however, pressing the Radio Key button again briefly
provides a 2nd Stage. Unlock output to unlock the remaining doors and the
boot.
* Some of the above features may not be available on certain vehicles or may
require additional labour and/or parts, incurring extra cost. Please consult your
installing dealer.
