Scopus CODICO IRD-2600 Manuel utilisateur

CODICO® IRD-2600 / IRD-2800

INTEGRATED RECEIVER DECODERS

User Manual

P/N 2349-72784-00

(Rev. B / December 2001)

Scopus Network Technologies Inc.

U.S. Offices

Scopus Network Technologies Ltd.

International Headquarters

12265 World Trade Drive

Suite G

San Diego, CA 92128

10 Ha’amal St., Park Afek

Rosh Ha’ayin, 48092

Israel

Tel: (858) 618-1600

Fax: (858) 618-1615

Tel: (972) –3-9007777

Fax: (972) –3-9007888

Email: [email protected]

Web: www.scopus.net

Scopus Network Technologies Ltd. Reserves the rights to alter the equipment specifications and

descriptions in this publication without prior notice. No part of this publication shall be deemed to be part

of any contract or warranty unless specifically incorporated by reference into such contract or warranty.

The information contained herein is merely descriptive in nature, and does not constitute a binding offer

for sale of the product described herein.

CODICO® is a Registered trademark of Scopus Network Technologies Ltd. In Israel, Germany, France,

U.K. U.S.A. and Japan. All references to registered trademarks of other vendors are the property of their

respective owners.

File IRD 2600-2800 User Rev B Draft.doc Saved 17/03/02 16:26

IRD-2600 / IRD-2800

Integrated Receiver Decoders

P/N 2349-72784-00 Page i

INTRODUCTION

Scopus Network Technologies Ltd. takes great pride in delivery of its products, and makes

every endeavor to ensure its clients full satisfactory.

On behalf of all the Scopus team, we would like to extend our congratulations on your

investment in the CODICO IRD-2600 and IRD-2800 Family of Integrated Receiver

Decoders.

IRD-2600 AND IRD-2800 INTEGRATED RECEIVER DECODER

MANUAL SCOPE AND STRUCTURE

The User Manual for the CODICO® IRD-2600 and IRD-2800 Integrated Receiver Decoders is

comprised of three main sections:

OVERVIEW:

This section provides introduction and product description, including highlights, benefits

and typical applications, gives a functional and physical description of the unit and lists its

main capabilities and specifications.

INSTALLATION:

This section provides data and procedures required to install and activate the unit.

Procedures include site preparation and requirements, installation in a 19" rack, cable

connections, panel options and Pin-out descriptions, initial settings and serviceability

check.

OPERATION:

This section provides theoretical background on the operation of the unit, and gives data

and instructions on using the unit and operating the control and monitoring functions

provided to the user.

MAINTENACE

The manual includes the following appendices:

• Appendix A Operational Menu Trees.

• Appendix B LNB Theory Of Operation.

It is assumed throughout this document that personnel have a general knowledge about the

IRD-2600 and IRD-2800 Integrated Receiver Decoders, application and capabilities.

General knowledge of the CODICO® System and its application is also assumed. For detailed

information, refer to the CODICO® MPEG-2 DVB Family Product Description documents.

User Manual

Front Matter

Page ii P/N 2349-72784-00

TECHNICAL SUPPORT

In case of technical problems with the CODICO system or one of its’ components please

refer to the System Documentation. In most instances, this may save you time in resolving

technical difficulties.

Should you not be able to resolve the problem please call your local distributor for technical

support.

HOW TO RETURN FAULTY PARTS

Before returning an item:

1. Request a RMA (Return Merchandise Authorisation) Tracking Number from your local

Distributor.

2. Scopus Network Technologies Support will assign a RMA Tracking Number; this must

accompany the item being returned and will be referred to in all correspondence.

3. The item is sent to Scopus Network Technologies with the RMA Number included in the

accompanying documentation (shipping and customs forms).

Customer Support Point Of Contact (POC)

Scopus Network Technologies Inc.

U.S. OFFICES

Scopus Network Technologies Ltd.

INTERNATIONAL HEADQUARTERS

12265 World Trade Drive 10 Ha’amal St., Park Afek

Suite G Rosh Ha’ayin, 48092

San Diego, CA 92128 Israel

Tel: (858) 618-1600 Tel: (972) –3-9007777

Fax: (858) 618-1615 Fax: (972) –3-9007888

Email: info@scopususa.com Email: info@scopus.co.il

Web: www.scopususa.com Web: www.scopus.co.il

IRD-2600 / IRD-2800

Integrated Receiver Decoders

P/N 2349-72784-00 Page iii

WARRANTY

SCOPUS Network Technologies Ltd. warrants that the Product and any part thereof,

including, but not limited to spare parts, will, when properly installed, conform to SCOPUS

Network Technologies Ltd. published specifications and that the Product and any parts

thereof, including, but not limited to, spare parts, will be free from defects deriving from wrong

workmanship and faulty materials under normal use and service, for a period of twelve (12)

months following the date of manufacture thereof.

The supply of spare parts at reasonable cost shall be available for a period of three (3) years

from the date of delivery.

This warranty does not cover ordinary wear and tear of the Product or other defects due to

circumstances beyond SCOPUS Network Technologies Ltd. control such as unsuitable

operating means, chemical, Electro-mechanical or electrical influences and damages which

may be caused by interference by the CUSTOMER or any unauthorized third party.

Defective cards/assemblies will be sent to SCOPUS Network Technologies Ltd. for repair.

The repaired cards/assemblies will be returned to the CUSTOMER within 30 days from their

receipt by SCOPUS Network Technologies Ltd.

Cards/assemblies repaired during the 12 months warranty period will carry a warranty of 6

months from date of repair or until end of original warranty period, whichever is the later date.

SCOPUS Network Technologies Ltd. sole liability under this warranty shall be limited to the

repair or replacement with equivalent units at SCOPUS Network Technologies Ltd. facilities,

of any Product or parts thereof that do not conform to SCOPUS Network Technologies Ltd.

published specifications or that are defective in material or workmanship, as specified above.

The expense of installing repaired or replaced parts shall be borne by the CUSTOMER.

SCOPUS Network Technologies Ltd. sole obligation under this Warranty is be the supplier of

the Product to the CUSTOMER and to provide such services as set out in this Warranty on

the SCOPUS Network Technologies Ltd. terms and conditions provided for herein. In no

event will SCOPUS Network Technologies Ltd. be liable to the CUSTOMER for any business

expenses, loss of profits, incidental, indirect or consequential damages, however caused,

unless such expenses, loss or damages shall have derived from an infringement of patents of

copyrights.

THE WARRANTIES STATED HEREIN ARE EXCLUSIVE AND ARE EXPRESSLY IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

Beyond the warranty period, SCOPUS Network Technologies Ltd. shall repair or replace

defective cards/assemblies according to its standard price list relevant at such time.

Cards/assemblies thus repaired shall carry a warranty of 6 months.

CE Certification

Both IRD-2600 and IRD-2800 meet all the CE Class B requirements with the exception of

Emission Requirements.

In order to meet CE requirements, the following cables must be connected on all ASI outputs

(ASI out 1, ASI out 2, ASI out 3). When cables are connected to these outputs then the

device is compliant with FAIR-RITE 0443164151.

User Manual

Front Matter

Page iv P/N 2349-72784-00

FCC Compliance Notice

Trade Name Scopus

Product Name Integrated Receiver Decoder

Product Model Number CODICO® IRD-2600

Product Model Number CODICO® IRD-2800

These devices comply with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

Responsible Party:

Responsible Party's Name Jay Gedanken

Address 16776 Bernardo Ctr. Dr.,

San Diego, CA 92128

Responsible Party's Telephone 1-619-618-1600

The FCC Wants You to Know

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to Provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, If not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off end on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician.

FCC Warning

Modifications not expressly approved by the manufacturer could void the user authority to

operate the equipment under FCC Rules.

IRD-2600 / IRD-2800

Integrated Receiver Decoders

P/N 2349-72784-00 Page v

TABLE OF CONTENTS

LIST OF FIGURES ................................................................................................................................ viii

LIST OF TABLES..................................................................................................................................... x

1. Overview .................................................................................................................................. 1-1

1.1. General Information.................................................................................................. 1-1

1.1.1. Highlights and Benefits ............................................................................. 1-1

1.1.1.1. Inputs....................................................................................... 1-2

1.1.1.2. Outputs.................................................................................... 1-3

1.1.1.3. Conditional Access.................................................................. 1-4

1.1.1.4. Control And Monitoring ........................................................... 1-4

1.1.2. Applications ............................................................................................... 1-5

1.1.2.1. Broadcast Redistribution ......................................................... 1-5

1.1.2.2. Stand Alone Decoder .............................................................. 1-5

1.1.2.3. Internal Corporate Distribution ................................................ 1-5

1.1.2.4. Data Transfer .......................................................................... 1-5

1.1.2.5. Descrambling .......................................................................... 1-6

1.1.3. Product Line .............................................................................................. 1-7

1.2. Functional Description .............................................................................................. 1-8

1.2.1. IRD-2600 and IRD-2800 Block Diagram................................................... 1-8

1.2.2. Basic Configuration ................................................................................... 1-9

1.2.3. Receiver Front End Options.................................................................... 1-10

1.2.4. Configuration Options ............................................................................. 1-11

1.3. Mechanical Structure.............................................................................................. 1-12

1.3.1. Enclosure ................................................................................................ 1-12

1.3.2. Front Panel.............................................................................................. 1-12

1.3.3. Rear Panel .............................................................................................. 1-12

1.3.4. Rear Panel Option Cards ........................................................................ 1-13

1.4. Management........................................................................................................... 1-15

1.4.1. Front Panel Control ................................................................................. 1-15

1.4.2. Infrared Remote Control.......................................................................... 1-15

1.4.3. PC Terminal Control................................................................................ 1-15

1.4.4. NMS-4000 Control .................................................................................. 1-15

1.5. Characteristics and Specifications.......................................................................... 1-16

1.5.1. Receiver Input Specifications.................................................................. 1-16

1.5.2. Output Specifications .............................................................................. 1-19

1.5.3. Control Ports Specifications .................................................................... 1-21

1.5.4. Physical Features and Specifications ..................................................... 1-21

2. Installation ................................................................................................................................ 2-1

2.1. Introduction ............................................................................................................... 2-1

2.1.1. Safety Precautions .................................................................................... 2-1

2.1.2. Inventory Check ........................................................................................ 2-1

2.2. Site Preparation........................................................................................................ 2-2

2.3. Installation................................................................................................................. 2-2

2.3.1. Installation in 19" Rack.............................................................................. 2-2

2.3.2. Insertion of the DVB-CI Module (PCMCIA)............................................... 2-3

2.4. Cable Connections ................................................................................................... 2-4

2.4.1. IRD-2600 and IRD-2800 Connection Setup and Options ......................... 2-4

2.4.2. Front End Panels ...................................................................................... 2-5

2.4.3. Decoder Cable Connections ..................................................................... 2-5

2.4.4. Terminal Control and Data Connections ................................................... 2-6

2.4.5. Power Connection..................................................................................... 2-7

2.4.5.1. Ground Connection ................................................................. 2-7

User Manual

Front Matter

Page vi P/N 2349-72784-00

2.4.5.2. AC Power Connector...............................................................2-7

2.4.5.3. DC Power Connector...............................................................2-7

2.5. System Expansion ....................................................................................................2-8

2.5.1. Cascade Loopthrough Output ...................................................................2-8

2.5.2. ASI Loopthrough Cascade ........................................................................2-9

2.5.3. RS-485 Master-Slave Connection.............................................................2-9

2.6. Initialization And Configuration ...............................................................................2-10

2.6.1. Powering Up ............................................................................................2-10

2.6.2. Initialization Sequence.............................................................................2-10

2.6.3. Serviceability Check ................................................................................2-13

3. Operation..................................................................................................................................3-1

3.1. Introduction ...............................................................................................................3-1

3.1.1. IRD Operation and Management ..............................................................3-1

3.1.1.1. Front Control Panel .................................................................3-2

3.1.1.2. Infrared Remote Control (Optional) .........................................3-3

3.1.1.3. Four Way Touch Pad...............................................................3-4

3.1.2. Front Panel Common Main Menu Options ................................................3-4

3.2. Configuration Menu...................................................................................................3-6

3.2.1. Configuration / Receiver Menu..................................................................3-7

3.2.2. Configuration / Decoder Menu ................................................................3-14

3.2.2.1. Decoder / Stream Configuration Sub-Menu ..........................3-16

3.2.2.2. Decoder/CI Configuration Sub-Menu ....................................3-19

3.2.2.3. Decoder / Video Configuration Sub-Menu.............................3-20

3.2.2.4. Decoder / Audio Configuration Sub-Menu.............................3-23

3.2.3. Configuration/System Menu ....................................................................3-25

3.3. Status Menu............................................................................................................3-29

3.3.1. Status / Receiver Menu ...........................................................................3-30

3.3.2. Status / Decoder Menu............................................................................3-34

3.3.2.1. Decoder / Stream Status Sub-Menu .....................................3-36

3.3.2.2. Decoder / CI Status Sub-Menu .............................................3-39

3.3.2.3. Decoder / Video Status Sub-Menu........................................3-41

3.3.2.4. Decoder / Audio Status Sub-Menu........................................3-43

3.3.3. Status / System Menu .............................................................................3-45

3.4. Test Menu ...............................................................................................................3-46

3.5. Run Menu ...............................................................................................................3-48

3.5.1. Run / Service Menu .................................................................................3-49

3.5.2. Run / PID Menu .......................................................................................3-52

3.5.3. Mode Run Menu ......................................................................................3-54

3.5.4. Advance Run Menu .................................................................................3-57

3.5.4.1. Graphics Configuration (GFX-CNFG) Sub-Menu..................3-58

3.5.4.2. Graphics Display (GFX-DSPL) Sub-Menu ............................3-60

3.5.4.3. Other Advance Run Sub-Menu .............................................3-66

4. Maintenance.............................................................................................................................4-1

4.1. General .....................................................................................................................4-1

4.2. Safety Instructions ....................................................................................................4-1

4.2.1. Safety Precautions ....................................................................................4-1

4.2.2. Caution and Warning Statements. ............................................................4-1

4.3. Test Procedures........................................................................................................4-2

4.3.1. Power-Up Check. ......................................................................................4-2

4.3.2. Maintenance Check Serviceability Check .................................................4-2

4.3.3. Audio/Video Stream Test...........................................................................4-2

4.4. Common Status Messages.......................................................................................4-3

4.4.1. General Status Messages .........................................................................4-3

4.4.2. Hardware Failure Messages .....................................................................4-4

IRD-2600 / IRD-2800

Integrated Receiver Decoders

P/N 2349-72784-00 Page vii

4.4.3. BIT Stream Warning Messages ................................................................ 4-5

4.4.4. Service Warning Messages ...................................................................... 4-6

Appendix A. Operational Menu Trees.............................................................................................. 1

Appendix B. LNB Theory Of Operation.......................................................................................... 11

B.1 Why is an LNB needed?............................................................................................ 11

B.2 Frequency Calculation IRD + LNB ............................................................................ 11

B.3 Use of a Splitter or Distribution (band) Amplifier ....................................................... 12

B.4 Calculating the L-Band Frequency ............................................................................ 13

B.5 Calculating Symbol Rate ........................................................................................... 14

User Manual

Front Matter

Page viii P/N 2349-72784-00

LIST OF FIGURES

Figure 1-1: IRD-2600 and IRD-2800 - General View .............................................................. 1-1

Figure 1-2: CODICO® Integrated Product Line ........................................................................ 1-7

Figure 1-3: Signal Path in the IRD-2600 and IRD-2800........................................................... 1-8

Figure 1-4: Front View of the IRD-2600/IRD-2800................................................................. 1-12

Figure 1-5: IRD-2600\IRD-2800 Rear Panel Section ............................................................ 1-12

Figure 2-1: DVB-CI Module and Smart Card Insertion............................................................. 2-3

Figure 2-2: IRD-2600 and IRD-2800 Rear Panel Configurations............................................. 2-4

Figure 2-3: IRD Jack Screw Ground Connection ..................................................................... 2-7

Figure 2-4: IRD Cascade with RF Receiver Loopthrough........................................................ 2-8

Figure 2-5: IRD Cascade with G.703 Receiver Loopthrough................................................... 2-8

Figure 2-6: IRD Cascade with ASI Loopthrough ...................................................................... 2-9

Figure 2-7: Master-Slave RS-485 Control Cable Configuration ............................................... 2-9

Figure 3-1: IRD-2600 / IRD-2800 Front Control Panel............................................................. 3-2

Figure 3-2: IRD Infrared Remote Control ................................................................................. 3-3

Figure 3-3: IRD Front Panel Main Menu Structure................................................................... 3-4

Figure 3-4: IRD Configuration Menu Tree Structure (DSNG IRD Configuration) .................... 3-6

Figure 3-5: DSNG Receiver Configuration Menu Tree Structure............................................. 3-8

Figure 3-6: Decoder Configuration Menu Tree Structure....................................................... 3-15

Figure 3-7: Decoder / Stream Configuration Sub-Menu Tree Structure ................................ 3-16

Figure 3-8: Decoder / CI Configuration Sub-Menu Tree Structure ........................................ 3-19

Figure 3-9: Decoder / Video Configuration Sub-Menu Tree Structure................................... 3-20

Figure 3-10: Decoder / Audio Configuration Sub-Menu Tree Structure................................... 3-23

Figure 3-11: System Configuration Menu Tree Structure ........................................................ 3-25

Figure 3-12: IRD Status Menu Tree Structure (DSNG IRD Configuration).............................. 3-29

Figure 3-13: DSNG Receiver Status Menu Tree Structure ...................................................... 3-31

Figure 3-14: Decoder Status Menu Tree Structure .................................................................. 3-35

Figure 3-15: Decoder / Stream Status Sub-Menu Tree Structure............................................ 3-36

Figure 3-16: Decoder / CI Status Sub-Menu Tree Structure.................................................... 3-39

Figure 3-17: Decoder / Video Status Sub-Menu Tree Structure .............................................. 3-41

Figure 3-18: Decoder / Audio Status Sub-Menu Tree Structure .............................................. 3-43

Figure 3-19: System Status Menu Tree ................................................................................... 3-45

Figure 3-20: Test Menu Tree Structure .................................................................................... 3-46

Figure 3-21: IRD Run Menu Tree Structure ............................................................................. 3-48

Figure 3-22: Service Run Menu Tree Structure ....................................................................... 3-49

Figure 3-23: PID Run Menu Tree Structure ............................................................................. 3-52

Figure 3-24: Mode Run Menu Tree .......................................................................................... 3-54

Figure 3-25: Advance Run Menu Tree..................................................................................... 3-57

Figure 3-26: Graphics Configuration (GFX-CNFG) Sub-Menu Tree........................................ 3-58

Figure 3-27: Graphics Display (GFX-DSPL) Sub-Menu Tree .................................................. 3-60

Figure 3-28: Product Status / Main Operation Overlay - Example........................................... 3-62

Figure 3-29: Product Status / Front End Operation Overlay - Example................................... 3-62

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Scopus Convertisseur de média

Scopus

Scopus IRD-2900 Series Manuel utilisateur

Scopus

Scopus UE-9000 Manuel utilisateur

Scopus

Scopus CODICO E-1710 Manuel utilisateur

Scopus

Scopus CODICO E-1710 Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur