Scion SC05.3100 Manuel utilisateur

SC05.3100

HDMI (HDBaseT) Extender, 100m

4K/60Hz. 4:4:4

User Manual

Version 1.0

SCION

User Manual

Scion Tech SC05.3100

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully before connecting, operating or

adjusting this product. Please keep this manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric

shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and

extend the life of your equipment.

Table of Contents

1. Introduction…………………………………………………….…………………………….…….…………….……………………….

2. Features……………………………………………………………………………………………………….……….…………….……..

3. Package Contents…………………………………….……………………………………………………………….……….………..

4. Specifications…………………………………………………………………….………………………………………………….……

5. Panel Description………………………………………………….….………….…………………………………………….……….

6. Connecting…………………………………………………………….…….…………….…………….…………………………………

7. LED Indicators………………………………………………………………….…………………….………………………….………

8. Application Drawing………………………………………………….….…….…….…………………….………………………….

9. Maintenance…………………………………………………………….….……….……………………………….……………………

9.1. Servicing………………………………………………….…….…………………………………………….……….…….……….

9.2. Warranty………………………………………………………………….……………………….…….………….……………….

9.3. Returning a Product………………………………………..….…………………………….…….…………………………….

9.4. Warranty Limits and Exclusions………………………………………….………………….….….……………………..

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 1

User Manual

Scion Tech SC05.3100

1. Introduction

The SC05.3100 extends the distance between the HDMI source and display using a single CAT5e/6 cable by up to

100m. Uncompressed Ultra HD 4K signals are transmitted without signal loss and automatically adjusts for

CAT5e/6 cable lengths. Bi-Directional Infra-Red provides control for both the source and screen. The extenders

use HDBaseT Class A technology to achieve Ultra HD 4K@60Hz.

The SC05.3100 is supplied as a pair and contains Tx/Rx infra-red cables and PSU . These units are ideal for home,

office and general retail display screens.

2. Features

●Extends HDMI up to 100m@1080p/60Hz and 70m@4K/60Hz

●Resolution: 4K/60Hz, YUV 4:2:0

●Standards: HDMI 2.0, HDCP 2.2, CEC, 3D

●Uncompressed zero delay video

●Audio: LPCM, Dolby Digital™, DTS Surround Sound

●Full Duplex RS232 pass-through

●Bi-Directional IR

●PoC (power over cable) receiver is powered by the transmitter

3. Package contents

1. 1 x Transmitter SC05.3100-TX

2. 1 x Receiver SC05.3100-RX

3. 2 x Infra-Red Sender Cable

4. 2 x Infra-Red Receiver Cable

5. 2 x 3-Pin Phoenix Terminal

6. 1 x User Manual

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 2

User Manual

Scion Tech SC05.3100

Connectivity

Signal input: 1 x HDMI Type A, 19-Pin Female

Signal output: 1 x RJ45 Data Socket

Infra-Red: 2 x 3.5mm Jack Socket

RS232: 1 x 3-Pin Phoenix Terminal

Power: 1 x DC Jack Socket 2.1mm

Signal

Input: HDMI

Output: HDBaseT

Standards: HDMI 2.0, HDCP 2.2

Bandwidth: 10.2Gbps

Video resolution: Up to 4K/60Hz

Colour space: YUV 4:2:0

Colour depth: 8/10/12-bit

Audio: DTS-HD™, Dolby-HD™

Infra-Red: 30KHz to 56KHz (940nm)

RS232: Full Duplex

Power

Type: AC to DC Mains Adaptor

Input: 100 ~ 240V AC 50/60Hz

Output: DC 12V / 2A

Consumption: 5 Watts

Environment

Storage temperature: -20° to 60°C

Operating temperature: -0° to 40°C

Operating humidity: 20% to 90% RH (no

condensation)

Dimensions: (W) 105 x (D) 71 x (H) 25mm

Weight: 700g

ESD: Human body +/-8Kv, (air gap discharge) and

+/-4Kv (contact discharge)

Safety and Emissions: CE, FCC, RoHS

4. Specifications

Connectivity

Signal input: 1 x RJ45 Data Socket

Signal output: 1 x HDMI Type A, 19-Pin Female

Infra-Red: 2 x 3.5mm Jack Socket

RS232: 1 x 3-Pin Phoenix Terminal

Signal

Input: HDBaseT

Output: HDMI

Standards: HDMI 2.0, HDCP 2.2

Bandwidth: 10.2Gbps

Video resolution: Up to 4K/60Hz

Colour space: YUV 4:2:0

Colour depth: 8/10/12-bit

Audio: DTS-HD™, Dolby-HD™

Infra-Red: 30KHz to 56KHz (940nm)

RS232: Full Duplex

Power

Type: Receives power from the transmitter

Environment

Storage temperature: -20° to 60°C

Operating temperature: -0° to 40°C

Operating humidity: 20% to 90% RH (no

condensation)

Dimensions: (W) 105 x (D) 71 x (H) 25mm

Weight: 700g

ESD: Human body +/-8Kv, (air gap discharge) and

+/-4Kv (contact discharge)

Safety and Emissions: CE, FCC, RoHS

TRANSMITTER RECEIVER

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 3

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 4

User Manual

Scion Tech SC05.3100

8. Panel Description

Normal Program

Operation

CAT5e/6

Link

TX GND RX

RS232

Normal Program

Operation

CAT5e/6

Link

TX GND RX

RS232

1 2 3 4 5 6 7 8 9 10

HDMI In DC 12V

IR-In IR-Out

Power

Status

SC05.3100 Transmitter

HDMI Out IR-In IR-Out

Power

Status

SC05.3100 Receiver

1 2 3 4 5 6 7 8 9

1. Status LED for HDMI Input

2. HDMI Input

3. Connect IR RX cable to IR-In port

4. Connect IR TX cable to IR-Out port

5. Power LED

6. Power DC 12V Input

7. Operation switch for RS232 pass-through

8. HDBaseT output CAT5e/6

9. HDBaseT Link LED indicator

10. RS232

1. Status LED for HDMI Output

2. HDMI Output

3. Connect IR RX cable to IR-In port

4. Connect IR TX cable to IR-Out port

5. Power LED

6. Operation switch for RS232 pass-through

7. HDBaseT output CAT5e/6

8. HDBaseT Link LED indicator

9. RS232

Transmitter Front Panel Transmitter Rear Panel

Receiver Front Panel Receiver Rear Panel

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 5

User Manual

Scion Tech SC05.3100

6. Connecting

Important:

These extenders are designed to work over a point to point connection using Category 5e or greater twisted pair

cable, under no circumstances should they be used with third party equipment including network switches,

modems or another manufacturers similar product.

1. Connect a HDMI cable to your source device and the transmitters input using a premium quality HDMI cable.

2. Connect a HDMI cable to the display or sink device and the receivers output using a premium quality HDMI

cable.

3. Transmitter IR connections: The “IR TX” cable connects to the “IR-Out” port for transferring IR to your source

device IR sensor window. The “IR TX” emitter LED should be attached to IR sensor window using the 3M™

sticker provided. The “IR RX” cable connects to the “IR-In” port for sending IR to the receiver for controlling

devices at the remote end.

4. Receiver IR connections: The “IR RX” cable connects to the “IR-In” port for sending IR to the transmitter for

controlling the source devices. The “IR TX” cable connects to the “IR-Out” port for transferring IR to the

remote end device. The “IR TX” emitter LED should be attached to IR sensor window using the 3M™ sticker

provided.

5. Using the 3-pin Phoenix terminals provided, connect the “Tx, Rx & Ground” cables to the transmitter and

receiver taking care to follow the correct polarisation.

6. Connect one end of the CAT5e patch cable to the transmitter and the other end to your wall outlet or patch

panel.

7. Connect one end of the CAT5e patch cable to the receiver an the other end to your wall outlet.

8. The default setting for the “operating”switch is “Normal”, check to make sure this hasn’t moved in transit.

The other setting “Program” is used for firmware updates only and should only be used with a technicians

support.

9. Connect the power supply to the transmitter and lock the DC connector for added security.

7. LED Indicators

Transmitter

●Power: Illuminates when the power supply in connected and switch on.

●Status: The LED will illuminate when a HDMI signal is detected.

●HDBaseT Link: Illuminates when a connection is made with the receiver.

Receiver

●Power: Illuminates when the transmitter is powered on and the CAT5e cable is connected to both devices.

●Status: The LED will illuminate when a HDMI signal is detected.

●HDBaseT Link: Illuminates when a connection is made with the transmitter

User Manual

Scion Tech SC05.3100

8. Application Drawing

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 6

Normal Program

Operation

CAT5e/6

Link

TX GND RX

RS232

HDMI In DC 12V

IR-In IR-Out

Power

Status

SC05.3100 Transmitter

Normal Program

Operation

CAT5e/6

Link

TX GND RX

RS232

HDMI Out IR-In IR-Out

Power

Status

SC05.3100 Receiver

Blu-Ray Player

RS232 Controller

Audio Amplifier

RS232

CAT5e (max 100m)

Audio Amp Remote

Blu-Ray Remote

4K/60Hz Display

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 7

User Manual

Scion Tech SC05.3100

9. Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, pint thinner of benzene to clean these devices.

9.1 Servicing

Damage requiring service: This product should be serviced by a qualified service engineer if:

●The DC power cord or AC adaptor has been damaged.

●Objects or liquids have entered the housings.

●The product has been exposed to rain.

●The product has stopped working or shows signs of significant change in operating performance or function.

●The unit has been dropped or severely damaged externally.

Servicing personnel: Do not attempt to service the product beyond that described in these instructions. Refer all

other servicing to authorised serving personnel.

Replacement parts: When parts need replacing ensure the service engineer uses parts specified by the

manufacture or parts that have the same characteristics as the original parts. Unauthorised substitutes may

result in fire, electric shock or other hazards.

Safety check: After a repair or service, ask the engineer to perform safety checks to confirm the product is in

proper working condition.

9.2 Warranty

If your product does not work properly because of a defect in materials or workmanship, our Company (referred

to as "the warrantor" ) will , for the length of the period indicated as below, (Parts and labour 2 years) which

starts with the date of original purchase ("Limited Warranty period"), at its option either (a) repair your product

with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or

replace will be made by the warrantor.

During the "Labour" Limited Warranty period there will be no charge for labour. During the "Parts" warranty

period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited

Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase

receipt or other proof of original purchase date is required for Limited Warranty service.

9.3 Returning a Product

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original

carton. Include a letter detailing the complaint and provide a day time phone number and/or email address

where you can be reached.

User Manual

Scion Tech SC05.3100

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 8

9.4 Limited warranty limits and exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT

COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages

which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures

which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation,

set-up adjustments, maladjustment of consumer controls, improper maintenance, power line surge, lightning

damage, modification, or service by anyone other than a Factory Service centre or other authorized service

engineer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE".THE

WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF

THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages

for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the

service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive,

but are for illustration only).

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

This returns policy does not affect your legal rights. Details of your legal rights are available from Trading

Standards or Citizens Advice Consumer Service.

Scion Tech Limited

Thatcham, Berkshire, United Kingdom

Table des matières

Autres manuels Scion Extenseur

Scion

Scion SC05.9000F Manuel utilisateur

Scion

Scion SC05.8100VS Manuel utilisateur

Scion

Scion SC05.6100 Manuel utilisateur

Scion

Scion PRO-9010 Guide de démarrage rapide

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur