2
1.
Safety Instructions
• When working wear personal safety guards to avoid the
risk from:
- evaporation of liquids
- Release of toxic or combustible gases
• Set up the instrument on a stable, clean, non-slip, dry
and fireproof surface. Do not operate the
instrument in explosive atmosphere, with hazardous
substances or under water.
• Gradually increase the speed, reduce the speed if:
- The instrument is not running smoothly, or container
moves on the base plate
• Temperature must always be set to at least 50燠澳 lower
than the fire point of the media used.
• Be aware of hazards due to:
-
Flammable materials or media with a low
boiling temperature
-
Overfilling of media
-
Unsafe container
• Process pathogenic materials only in closed vessels.
•Check the instrument and accessories prior to each use. Do
not use damaged components. Accessories must be securely
attached to the device and can not come off by themselves.
Always disconnect the plug before fitting accessories.
• When the external temperature sensor needed, the tip of
the measuring sensor must be at least 5-10mm from vessel
bottom and wall.
Warning!
•Read the operating instructions
carefully before use.
•Ensure that only trained staff works with the
instrument.
Risk of burn!
•Caution when touch the housing parts and
the hotplate which can reach temperature of
5濃濃燠.
•Pay attention to the residual heat
after switching off.
Protective ground contactʽ
•Make sure that socket must be
grounded
(protective ground contact) before use.
