Scientific Atlanta Explorer 8300 Manuel utilisateur

Multi-Room Digital Video Recording (MR-DVR) System

•Record all of your favorite programs on the Explorer®8300™ Multi-Room™

Digital Video Recorder (MR-DVR), and then play them back in any room that

has a Scientific-Atlanta digital set-top*

• Control playback of recordings independently in each room by pausing,

rewinding, or fast-forwarding at your own pace

• Each room can play back the same recording or different recordings with each

user having their own individual control of the play back

• Use Parental Controls to block play back of recordings in any room

*The Scientific-Atlanta digital set-tops must be Explorer 2000™ Rev 3, or later,

standard-definition set-tops.

Getting Started Withthe

Multi-Room™

DVR System

LIST

AUDIO VIDEOLR

EXIT

INFO

GUIDE

CH+

CHÑ SELECT

POWER VOL+VOLÑ

Contents

Welcome! ............................................................................................ 3

Enjoy Programs in Every Room!......................................................... 3

AllTouch Remote Control .................................................................... 4

Play Back and Control Recordings on

Client Set-tops in Each Room ....................................................... 5

Display the List of Recordings....................................................... 5

Play Back a Recording.................................................................. 5

Access and Play Back a Recording from the Program Guide ...... 6

Control Playback ........................................................................... 6

Pause a Recording........................................................................ 6

Status Bar...................................................................................... 6

Rewind or Fast-Forward a Recording ........................................... 7

Watch Action Frame by Frame ..................................................... 8

Use Instant Replay........................................................................ 8

Watch in Slow Motion.................................................................... 8

Stop a Recording That Is Playing.................................................. 8

Parental Controls ................................................................................ 9

Select Programs to Be Blocked on the 8300 MR-DVR Server ..... 9

Turn Parental Controls On and Off ..............................................11

Using Parental Controls on the Client Set-Tops.......................... 12

Frequently Asked Questions ............................................................. 13

Welcome!

Welcome to MR-DVR by Scientific-Atlanta! Now you can play programs that the

Explorer 8300 MR-DVR (8300 MR-DVR server) has recorded anytime you want.

Every TV connected to a Scientific-Atlanta digital set-top (client set-top) now has

access to the programs recorded and stored on the 8300 MR-DVR server.

Enjoy Programs in Every Room!

The client set-tops allow you to enjoy programs that the 8300 MR-DVR server has

recorded or is currently recording. While you watch a recording, you can control it in

any of the following ways:

• With MR-DVR, as many as four TVs can play the same recording (or different

recordings) at the same time.

• Each client set-top has its own control of any recording.

• Pause, rewind, or fast-forward (3 speeds) in any room.

• Watch a recording frame by frame in forward or reverse.

• Watch a recording in slow motion.

• Use instant replay and watch the action again.

Let’s Get Started!

AllTouch Remote Control

Use the keys on the AllTouch®Remote Control to access the MR-DVR features.

This guide describes the keys used to access the MR-DVR features. For descriptions

of the other key functions, refer to the user’s guide for your remote control model:

•AT8400™AllTouch Remote Control User’s Guide, part number 749219

•AT8450™AllTouch Remote Control User’s Guide, part number 4001707

•AT8550™AllTouch Remote Control User’s Guide, part number 4006383

Important:

• Your remote control must be set to Cable Mode (CBL) to access the DVR

features.

• The dedicated PIP keys on the remote are only functional on the Explorer

8300 DVR server and the other DVR set-tops.

T11169

Swaps PIP screen

with Main screen

Turns PIP feature on or off

Moves PIP screen

Displays the Program Guide

If offered by your cable

service provider, displays a

menu of services or options

Displays a list of your

recorded programs

Makes on-screen choices

Stops recording a program

or stops playback

Pauses the program

you are watching

Rewinds in 3 speeds

(Must be in Play mode)

Replays the last 8 seconds of

a program (Instant Replay)

Moves through on-screen

choices

Selects cable mode

Performs the selected action

Exits to full-screen TV

Dedicated PIP Keys

Selects PIP channels up or down

Power on or off

Dedicated DVR Keys

Returns to live programming

Fast-forwards in 3 speeds

(Must be in Play mode)

Records a program

Resumes playing a paused

program (Press twice for

slow motion)

Press to record this program

or press for more recording options.

Scheduled Recordings Preferences

"The Jungle Book"

Save: Until Erased

Friends

The Jungle Book

Divine Design

NYPD Blues

Wed

Thur

Mon

Fri

Wed

11/10

11/11

11/15

11/12

11/10

8:30pm

9:00pm

7:00pm

9:00pm

10:00pm

30min

1hr 0min

2hr 0min

30min

1hr 0min

Play

Recorded List

Recorded Programs Date Time Length

Play Back and Control Recordings on

Client Set-tops in Each Room!

With MR-DVR, you can use your client set-tops to play and control recordings that

are stored on the 8300 MR-DVR server. The remainder of this guide explains the

features available on the client set-tops. For additional information on the 8300

MR-DVR server features, refer to Getting Started With the Explorer 8300 and

8300HD™ DVR, part number 4004007, and User’s Guide for the Digital Video

Recorder for the Explorer® 8000, Explorer® 8000HD, Explorer® 8300, and Explorer®

8300HD, part number 4003870.

Display the List of Recordings

To display the list of programs that the 8300 MR-DVR server has recorded or is

currently recording, press List . The Recorded List screen appears.

To close the Recorded List screen,

press List again, or

press Exit .

Play Back a Recording

Follow these steps to play recordings that the 8300 MR-DVR server has recorded.

1. If the Recorded List is not displayed, press List . The Recorded List

screen appears.

2. Press Move Up or Move Down to highlight the recording you want to

watch.

3. Press Select . An options screen appears with the Play option highlighted.

4. Press Select again. The following occurs:

• If the recording is not blocked, the recording begins playing.

• If the recording is blocked, a PIN Entry screen prompts you to enter your

Parental Control PIN to unblock this program. Use the number keys to enter

your four-digit Parental Control PIN. After entering your PIN, the recording

begins playing.

Programs that have been

recorded, as well as those that

are being recorded, appear in

this list.

To display information about a

recorded program, press

Information .

The Closed Lock symbol

indicates that this recording

can be played only by entering

a valid Parental Control PIN.

The Recording symbol

indicates that the 8300 MR-DVR

server is currently recording this

program.

Pause a Recording

1. Press Pause . The action freezes and the Status Bar appears briefly in the

Pause position at the bottom of the screen. The program will remain paused for

up to one hour. If you tune away from the recording, the client set-top will

bookmark your position. When you tune back, you can resume watching from

where you stopped.

2. To resume playing the program, press Pause again or press Play .

Control Playback

When the recording begins playing, use the pause, rewind, fast-forward, or other

keys on the remote to control the recording.

Status Bar

The Status Bar appears whenever you press the pause, rewind, or fast-forward keys

when playing back a recording.

Note: You can only pause live TV on the 8300 MR-DVR server.

Pause American Idol

8:00 – 9:00pm

Pause American Idol

60 min.

This area indicates

the current status

(paused in this case).

The name of the

program appears

beneath the bar.

The yellow pointer

indicates the portion

of the program

currently shown.

For a recording, the

program length displays.

For a recording, red indicates the portion of the

program that was not recorded.

Green indicates the portion of the

program that the 8300 MR-DVR server

has buffered or saved.

Access and Play Back a Recording From the Program Guide

If your remote control does not have a List button, follow these steps to play back

recordings from the Program Guide.

1. Press Guide .

2. Use the arrows keys to choose the MR-DVR channel and press Select .

Note: The MR-DVR channel is a dedicated channel that allows you to play back

recorded programs.

3. Use the arrow keys to choose the program you want to play back.

4. Press Select to play back the program.

Note: Recordings whose titles are gray in the Recorded List are high-definition

programs or erased programs. You cannot play high-definition programs on the

client set-tops.

Rewind or Fast-Forward a Recording

Rewind a recording to watch a portion of it again, or fast-forward through portions you

don’t want to watch. You can rewind or fast-forward in any of three different speeds.

Follow these steps to rewind or fast-forward a recording:

1. Make sure that the recording is in not in the Pause position. If it is paused, press

Play .

2. Rewind or fast-forward the recording by following these instructions:

To Press Result

Rewind Action reverses and the Status Bar appears in

the Rewind position at the bottom of the

screen. The pointer on the Status Bar moves

to the left as you rewind the program.

Speed up: Press Rewind one or two

more times to incrementally increase the

speed. Press it again and the program

resumes playing at normal speed.

Fast-forward Action speeds up and the Status Bar appears

in the Fast-forward position at the bottom of

the screen. The yellow pointer on the Status

Bar moves to the right as you fast-forward the

program.

Speed up: Press Fast-forward one or

two more times to incrementally increase the

speed. Press it again and the program

resumes playing at normal speed.

Note: When you reach the end of the record-

ing, the Playback Status screen appears to

give you the option to display the recorded list,

play the recording from the beginning, or

display live TV.

To Press Result

3. To resume play at normal speed, press Play . The Status Bar indicates the

Play position and the recording plays at normal speed.

Watch in Slow Motion

1. While playing a recording at normal speed, press Play once. The action

slows to 1/4 (quarter) speed.

2. To resume play in normal speed, press Play again.

Stop a Recording That Is Playing

1. Press Stop . The Playback Status screen appears.

2. Press Move Up or Move Down to highlight your selection.

3. Press Select .

Choose highlighted item

Playback Status

Recorded ListLive TV

Options

Play from beginning

Play from current position

Skip to end

"Design On A Dime"

Recorded: Thu 11/13

10:00PM 30min

Save: All Episodes

Stopped at 19 min

(11 min left)

Running time: 30 min

Selecting Skip to end skips over

a portion of the recording and

begins playing the last minute of

the recording.

Selecting Live TV displays

the last channel that you were

watching.

Watch Action Frame by Frame

Analyze sports events and other programs by watching the action frame by frame.

When you watch frame by frame, you fast-forward or reverse the action one frame at

a time.

1. Press Pause . The action stops.

2. Fast-forward or reverse the action one frame at a time by following these steps.

To Move Action Press Result

Back one frame

Forward one frame

Each time you press Rewind ,

action moves backward by one frame.

Each time you press Fast-forward ,

action moves forward by one frame.

3. To resume play at normal speed, press Play .

Use Instant Replay

Press Instant Replay to watch the last 8 seconds of a recording again.

Note: Every additional press jumps back 8 more seconds.

Parental Controls

You can prevent children or anyone else from watching specific programs by

using both the Block and the Parental Control features:

• First, select programs you want to block. (For details, see “Select

Programs To Be Blocked on the 8300 MR-DVR Server” next in this section.)

• Then, turn blocking on by turning on the Parental Control feature.

(For details, see “Turn Parental Control On and Off” on page 11.)

When programs are blocked in this manner, they can be watched only

after entering a four-digit personal identification number (PIN).

Select Programs To Be Blocked on the 8300 MR-DVR

Server

You can program the 8300 MR-DVR server to block programs by channel, rating,

time of day, or any combination of the following methods.

Note: The 8300 MR-DVR server will record the blocked programs, but to play

back a blocked program you must enter a valid Parental Control personal

identification number (PIN)

1. Press Settings twice. The General Settings menu appears.

2. Press Move Up or Move Down to highlight one of the following

options:

•Block:Channels blocks all programs on a specific channel.

•Block:Rating blocks all programs according to the rating assigned to

the program, such as G, PG, PG-13, or R.

•Block:Time New blocks all programs broadcast during a specific time.

3. Press Select . A PIN Entry screen appears.

4. Press the number keys to enter your four-digit PIN. A menu for the option

you selected in step 2 appears.

5. Press Move Up or Move Down to highlight the channel, rating, or

date you want to block. Or, if your cable service provider allows, you may

select a channel by pressing the numeric keys on your remote control.

6. Press Select . The 8300 MR-DVR server indicates that the channel or

rating is blocked. If you are blocking a broadcast time, skip to step 8.

Otherwise, go to step 7.

Note: The 8300 MR-DVR server indicates a blocked channel or blocked

rating in the following ways:

•Blocked channels: The channel number is listed in the right column

on the General Settings menu, and a Closed Lock symbol appears

in the CHANNELS column next to the channel that you selected.

•Blocked ratings: A Closed Lock symbol appears in the RATING

column next to the rating that you selected.

7. Continue this process of highlighting and selecting the channels or ratings

you want to block. When all channels and ratings that you want to block

have a Closed Lock symbol next to them, press Accept

to have

the 8300 MR-DVR server accept your blocks. Go to step 10.

8. In the START column on the General Settings menu, change the time

shown to the time you want the block to start by following this process:

• First, press Move Left or Move Right to highlight the one you

want to change (hours, minutes, and A.M. or P.M.).

• Then, press Move Up or Move Down to change the setting.

Or, if your cable service provider allows, you may select a setting by

pressing the numeric keys on your remote control.

• Repeat this process to change each setting as necessary.

• When the correct START time is shown, press Select . The time

you want to start blocking programs appears in the START column

and the cursor moves to the STOP column.

9. In the STOP column, change the time shown to the time you want the

block to end by following this process:

• First, press Move Left or Move Right to highlight the one you

want to change (hours, minutes, and A.M. or P.M.).

• Then, press Move Up or Move Down to change each

setting. Or, if your cable service provider allows, you may select a

setting by pressing the numeric keys on your remote control.

• Repeat this process to change each setting as necessary.

• When the correct STOP time is shown, press Accept

to have the

8300 MR-DVR server accept the start and stop times you have

entered.

10. Turn on the Parental Control feature to have the 8300 MR-DVR server block

the programming you selected. For details, see “Turn Parental Control On

and Off” on the next page.

Autres manuels pour Explorer 8300

Table des matières

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur