Sceptre X42 Manuel utilisateur
QUICK START GUIDE
To start watching the TV right away you must complete the
following steps:
1. Verify you have received everything
2. Install the batteries to the remote control
3. Connect power and a cable or antenna to the TV
4. Turn on your TV and scan for channels
5. [OPTIONAL] TV Mounting Information
1. Package Contents
SCEPTRE X42 TV Display x 1
User Manual x 1
Power Cord x 1
Warranty / Registration Card x 1
X42 Remote Control (AAA Batteries included) x 1
2. Installing Batteries to the Remote
Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-)
symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards,
re-attach the battery cover.
Please note:
•This remote follows SONY’s universal remote code. Please look up SONY’s codes in
your universal remote guidebook.
•Only use AAA batteries.
•Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire
risk or lead to personal injury.
•Dispose the batteries in accordance with local laws and regulations.
•Keep the batteries away from children and pets.
•If the remote control is not used for a long time, remove the batteries.
•Keep the remote control away from moisture, sunlight, and high temperatures.
3. Connecting Your Cables
The following picture offers a suggestion for connecting most of your audio video equipment.
5. Ready to Watch Some TV?
Starting up the X42 LCD HDTV
1. Make sure your power cable is connected and the standby red light in the front of the TV
is lit up.
2. Check all your connection cables off the side or the back of your TV and also your AV
devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
If You’ve Connected Antenna or Cable to the TV…
If an antenna or cable (without a cable box) is connected to your TV’s tuner, you will need to go through an
INITIAL SETUP process in order to watch the TV. When you turn on the TV for the first time, the INITIAL
SETUP screen will come up. Follow through the instructions to complete the setup and your TV will be ready
for viewing.
1. Press ENTER to start the setup.
2. Use the
▲▼ buttons to select your language and press ↵.
3. Use the ▲▼ buttons to select your tuner type and press ↵.
4. Use the
▲▼ buttons to select Scan and press ↵to scan for channels.
5. Once the scanning finishes, press ↵to exit the INITIAL SETUP.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your local
broadcasting stations for more information.
•The X42 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger
signal than normal TVs. If you cannot achieve that signal level with your antenna
or cable, your X42 LCD HDTV might lose picture or sound.
5. Removing the Base for Wall Mounting
1. Please handle the TV with two or more people. Please locate a large flat surface (i.e. table)
and put a soft cloth (i.e. blanket) on the surface. Please set the TV facing down on the flat
surface so the panel does not get damaged.
2. Take a look at the neck that’s connecting the base to the TV. There should be 4 screws on
the neck and 2 screws on the side. Remove the 6 screws and the base will slide off.
3. Once you have taken off the base, please save it along with the 6 screws in a safe place so
that they will not be lost when you want to re-attach the base.
4. Mounting Specification: 400mm x 200mm using screw size M6. Length of screw should not exceed
12mm. Please Note: The 12mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 12mm to the thickness of your
mounting plate in order to get the total screw length.
Autres manuels pour X42
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Sceptre TV
Sceptre
Sceptre U435 Series Manuel utilisateur
Sceptre
Sceptre E195BD-SHD Manuel utilisateur
Sceptre
Sceptre U515CV-UMKR Manuel utilisateur
Sceptre
Sceptre E325BV-HDU Manuel utilisateur
Sceptre
Sceptre E24 Manuel utilisateur
Sceptre
Sceptre X370BV-FHD Manuel utilisateur
Sceptre
Sceptre X322BV-SRR Manuel utilisateur
Sceptre
Sceptre X37SV-NAGA Manuel utilisateur
Sceptre
Sceptre X32 Series Manuel utilisateur
Sceptre
Sceptre U55 Series Manuel utilisateur
Manuels TV populaires d'autres marques
Philips
Philips Colour Television Manuel utilisateur
Toshiba
Toshiba 27A10 Manuel utilisateur
Philips
Philips 42PF9630A/37 Manuel utilisateur
Hitachi
Hitachi 32FX48B Manuel utilisateur
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur
Changhong Electric
Changhong Electric uhd55b6000is Manuel utilisateur
