This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
WEE/CG0783SS collection point as defined by your local council.
© 2022 System Q Ltd
2
PoE Extender - Gigabit - 4Ch
ScatterBox is a registered trademark of System Q Ltd
Document ref: qPOE154
All specificationsare approximate.SystemQ Ltd reserves the right to change product specificationsor features without notice. Whilst every effort is
made to ensure that these instructionsare complete and accurate, System Q Ltdcannot be heldresponsible for any losses,no matter how theyarise,
from errors or omissionsin these instructions,or the performance or non-performance of the equipment refered to.
LED Status Indicators
No connection to the port
The port is transmitting or receiving data
The port is linked and receiving power
The port is not receiving power
No connection to the port
The port is transmitting or receiving data
The port is linked and providing power to a device
The port is not providing power to a device
Troubleshooting
Check power to device from external source. Check that
the power lead (IEC lead) is plugged in to the PSU and
the PSU is plugged into the switch.
Check that the power lead (IEC lead) is plugged in to
the PSU and the PSU is plugged into the switch.
Network light not
flashing
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly.
No PoE on
connected device
Poor quality cable or
termination
Check the Ethernet cabling to your device is of good
quality and is terminated correctly
Total power
consumption exceeded
Check the load devices are not above the total power
consumption of the switch.
Check the distance of Ethernet cable to your device.
Ethernet cables have a 100m maximum length.
Slow flashing LEDs,
No Network or PoE
on load devices
Turn the power off to the switch & unplug the load
devices (Check Ethernet cabling to load devices). Leave
the switch turned off for 10 seconds and then power
the switch back up, plug each device back into switch
individually to help troubleshoot the suspect cable.
Specification
30W per port (60W Whole device maximum)
H) 28 x (W) 120 x (D) 86mm
