SC&T Power Rack Series Manuel utilisateur

Smart Cabling & Transmission Corp. V1.0

V1.0

Converter Series

User Manual

Model : AD001HD4-4K

4K HD-TVI/ AHD/ HDCVI/ CVBS to HDMI/ VGA/ CVBS Converter

with Loop Out & Audio Embedder

User Manual

AD001HD4-4K

Introduction

AD001HD4-4K is a CCTV HD converter that supports up to 8MP video input for HD-TVI/ AHD/ HDCVI/ CVBS; it

allows surveillance video to be shown on 4K HDMI, VGA, and CVBS displays at the same time. If don’t have

a 4K TV, you can watch surveillance videos on an existing display. In addition, the converter has a 3.5mm

audio input to play the camera sound on an HDMI TV. It’s very suitable for grocery stores, train stations,

metro stations and public parking garages.

Features

Video input resolution up to 4K/ 8MP.

Video output resolution up to 4K for HDMI, 1080p for VGA, and NTSC/ PAL for CVBS.

Built-in loop out for daisy chain or a DVR.

Built-in 3.5mm audio input (Output through HDMI TV or external audio accepter).

Built-in RS232 Interface for RS232 commands or firmware upgrade.

Camera video displays on HDMI, VGA, CVBS displays at the same time.

Supports PIP (Picture in Picture).

Support OSD (On Screen Display) to configure parameter.

UTC control commands may vary by camera brands, models, etc. So this function is not

available for all cameras.

Diagram

1 in 4 out Mode (HDMI, VGA, CVBS output at the same time)

User Manual

AD001HD4-4K

2 in 2 out Mode (Dual cameras with PIP)

2 in 3 out Mode (Dual cameras with manual switching Cam 1/ 2)

User Manual

AD001HD4-4K

Panel View

Interface

Function

Power LED

To indicate power status

Camera 1 LED

To indicate Camera 1 status

Camera 2 LED

To indicate Camera 2 status

OSD

To control OSD menu

Audio

To use a 3.5mm audio cable to connect an audio source from a

HD-TVI, AHD, HDCVI camera

Camera 1

To use a coaxial cable to connect with a HD-TVI, AHD, HDCVI

camera

Camera 2 / Loop Out

To use a coaxial cable to connect with a HD-TVI, AHD, HDCVI

camera, a DVR or another AD001HD4-4K

HDMI

To use an HDMI cable to connect with an HDMI display

VGA

To use a VGA cable to connect with a VGA display

CVBS

To use a coaxial cable to connect with a CVBS display

Console

To use a 3.5mm to RS232 cable to connect with a PC

DC 12V

To connect with a DC12V 500mA power adapter.

User Manual

AD001HD4-4K

LED Indication

Installation and Cabling

Avoid being in areas with electrical interferences, such as mobile phones, microwaves and so on,

when installing your AD001HD4-4K.

Remove the power before installation.

Audio Input

If connecting to a camera with a built-in microphone, AD001HD4-4K can only output the video

source.

Console

Use DB9(Female) to 3.5mm stereo phone jack.

Configure RS232 parameter at 115200/ 8-N-1.

Pinout Instructions:

3.5mm Stereo Phone Jack

Define

Pin 1

Pin 2

Pin 3

GND

Interface

LED Color

Status

Power

Green ON/ OFF

Power ON/ OFF

Camera 1

Green ON/ OFF

Signal Detected/ No Video

Camera 2

Green ON/ OFF

Signal Detected/ No Video

DB9 (Female)

Define

Pin 2

Pin 3

Pin 5

GND

User Manual

AD001HD4-4K

Video Format & Resolutions

Video Input Format & Resolutions (Auto Define HD-TVI, AHD, HDCVI, CVBS Video Format)

Resolutions

HD-TVI

AHD

HDCVI

8MP (4K)

12.5/15 FPS

15 FPS

6MP

20 FPS

5MP

12.5/20 FPS

20 FPS

4MP

25/30 FPS

2MP (1080p)

25/30 FPS

1.3MP (720p)

30 FPS

25/30 FPS

25/30/50/60 FPS

Video Output Format & Resolutions

Resolution

HDMI

VGA

CVBS

4K2K

30/ 25Hz

2160p

30/ 25Hz

1080p

60/ 50Hz

1080i

60/ 50Hz

720p

60/ 50Hz

576p

60Hz

PAL

480p

60Hz

NTSC

When HDMI/ VGA resolution is set to

480p, 720p@60, 1080i@60, 1080p@60, 2160p@30, 4K2K@30, CVBS will be NTSC.

576p, 720p@50, 1080i@50, 1080p@50, 2160p@25, 4K2K@25, CVBS will be PAL.

OSD Settings

Use 5-Way Tactile Switch to Control OSD Menu

Button

Features

●

Turn ON/ OFF OSD menu

▲

▼

Down

◀

Switch function

▶

Switch function

User Manual

AD001HD4-4K

Turn On OSD Menu

Press●and enter OSD menu.

Switch Modes

Press▲▼ to select Single Camera (Default) and pressto change modes

Supported Modes

1 in 4 out mode (with UTC pass through/ control)

2 in 3 out mode

2 in 2 out mode (with PIP)

Refer to the chart below to change modes:

Interface

1 in 4 out

2 in 3 out

2 in 2out (PIP)

Input

Cam 1

Up to 8MP

Up to 1080p

Cam 2

Loop out

(Resolution

same as Cam 1)

Up to 1080p

Output

HDMI

Up to 4K

VGA

Up to 1080p

CVBS

NTSC/PAL

Not Supported

Caution

※The resolution of the two cameras must be at the range between 480p and 1080p. Otherwise, the

screen will display an OutRange reminder.

※VGA resolution only supports up to 1080p.

※Make sure your TV's supported resolutions when switching resolutions from AD001HD4-4K.

※Set up the same frame rate for both cameras when having dual camera inputs.

User Manual

AD001HD4-4K

Change Resolutions

Press▲▼to select “Resolution Out”, then pressto select a desired resolution

Refer to the chart below to switch the desired resolution:

Switching Order

Resolutions

480p

576P

720p@60Hz

720p@50Hz

1080p@60Hz

1080p@50Hz

2160p@30Hz

2160p@25Hz

4K2K@30Hz

4K2K@25Hz

1080i@60Hz

1080i@50Hz

Turn On UTC

In 1 in 4 out mode, press▲▼to select “UTC Control”and press, and then you can press

▲▼to control camera directions.

User Manual

AD001HD4-4K

Turn Off UTC

In the semi-transparent OSD menu, select “Back to OSD MENU”and pressto turn off UTC.

Change Video Source

In 2 in 2 out or 2 in 3 out modes, press▲▼to select “Source Select”and pressto choose Camera 1 or 2.

Turn on PIP

In 2 in 2 out mode, press▲▼to select “PIP Background”and pressto select Camera 1 or 2 as the

background.

User Manual

AD001HD4-4K

Change PIP Position

Press▲▼ to select “PIP Position”and then pressor to select position 1/ 2/ 3/ 4.

Adjust PIP Size

Press▲▼ to select “PIP Size”and pressor to enlarge/ reduce picture size (Max 1/4 TV size).

Perform Factory Reset

Step 1 -Press and hold ●when power off.

Step 2 -Power on, and press and hold ●for 5 secs until seeing Camera 1 and Camera 2/ Loop out

LEDs flashing.

Step 3 -Wait for the device to reboot.

Autres manuels pour Power Rack Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SC&T Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur