SawStop TSG-FDC Manuel utilisateur
OWNER’S MANUAL
FLOATING DUST COLLECTION GUARD
MODEL TSG-FDC
The saw shown on the front cover is the Industrial Cabinet Saw, Model ICS.
Your saw may look different.
Copyright SawStop, LLC
All Rights Reserved
Updates to this manual and additional related
documentation such as exploded views and parts list are
available at www.sawstop.com
Revised January 2024
SawStop, the SawStop blade logo, and the conguration of this product are either
registered trademarks or trademarks of SawStop, LLC. Software copyright by
SawStop, LLC. All rights reserved.
TO OUR CUSTOMERS
Thank you for purchasing the SawStop Floating Dust Collection Guard. We are condent you
will be pleased with its quality and performance.
This manual tells you more about your dust collection guard and how to operate and
maintain it. Please read the manual carefully. The manual also includes our warranty and
important safety information.
If you ever have any questions or comments, feel free to contact us at the address below.
SawStop, LLC
11555 SW Myslony Street | Tualatin, Oregon 97062 USA
Phone: (503) 570-3200
Fax: (503) 570-3303
Email: [email protected]
www.sawstop.com
HOW TO GET HELP
Missing Parts? Have Questions?
Our technical support team is standing by
M-F, 7am-5pm PST
to help with whatever you need.
503.582.9934
Give us a call at
SERVICE@SAWSTOP.COM
Email us at
TABLE OF CONTENTS
Product Specications.................................................................................
Parts Inventory..............................................................................................
Parts and Hardware Lists...................................................................................................
Tools Needed.....................................................................................................................
Assembly Instructions..................................................................................
Attaching the Upper Leg and Leg Support to the Dust Collection Mounting Bracket
.....
Attaching the Dust Collection Guard Mounting Bracket to the Extension Table..............
Assembling the Leg Support Brackets..............................................................................
Attaching the Leg Support Brackets to the Dust Collection Guard Mounting Bracket....
Attaching the Leg Support Brackets to the Extension Table.............................................
Attaching the Dust Tubes to the Dust Collection Guard Mounting Bracket......................
Attaching the Floating Blade Guard to the Dust Tube....................................................
Attaching the Dust Collection Hose to the Dust Tube and the Floating Blade Guard.......
Connecting to a Dust Collection System .........................................................................
Adjusting Your Floating Dust Collection Guard..........................................
Adjusting the Dust Tube Parallelism..................................................................................
Adjusting the Dust Tube Length........................................................................................
Adjusting the Floating Blade Guard..................................................................................
Adjusting the Floating Blade Guard Spring.......................................................................
Maintenance..................................................................................................
Reference......................................................................................................
Warranty............................................................................................................................
Safety.................................................................................................................................
Warnings...........................................................................................................................
Warning Labels..................................................................................................................
1
2
2
3
4
4
5
9
10
11
14
15
18
19
19
19
20
21
22
22
23
23
24
24
25
1TSG-FDC OWNER’S MANUAL
PRODUCT SPECIFICATIONS
Product Specications
Net Weight 58 lbs
Floating Blade Guard Dimension 3.5” x 18.5”
Distance Between Blade and End of Extension
Table 35.75” to 68”
Inner Dust Tube Diameter 3”
Outer Dust Tube Diameter 4”
Outer Dust Tube Height Above Table 13.6”
Outer Dust Tube Height Above Floor 33.5” to 50”
The SawStop Floating Dust Collection Guard is designed as a blade cover and dust
collection hood. It is intended for use on SawStop cast iron table saws. The transparent
oating guard back plate can be cut or removed to provide clearance for safety devices
such as riving knives, splitters, and anti-kickback pawls. The Floating Dust Collection
Guard is compatible with dado stacked blades.
2
TSG-FDC OWNER’S MANUAL
PARTS INVENTORY
Parts and Hardware Lists
PAGES:
2-3
Extension Leg (1)
Dust Collection Guard Mounting Bracket (1)
Upper Leg (1)
Leg Support Bracket (2)
Outer Dust Tube - Curved (1)
Outer Dust Tube - Straight (1)
Inner Dust Tube (1)
Dust Collection Hose w. clamps (1)
Floating Blade Guard (1)
Hardware Pack (1)
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
Parts
E
D
G
C
I
J
F
H
B
A
The Floating Dust Collection Guard is shipped partially assembled. Please unpack the
parts carefully and conrm you have received each item on the list below.
3TSG-FDC OWNER’S MANUAL
Tools Needed
•
•
•
•
Measuring Tape
Flathead and Phillips Screwdrivers or
Driver Bits
Pen or Pencil
Bolt - M6 x 1.0, 40mm, Hex Head (4)
Nut - M6 x 1.0 (4)
Bolt - M6 x 1.0, 18mm, Flat Head, Socket (2)
Eye Bolt - 10.5mm, M5X1.0, 80mm (2)
L Bracket – Leg Support (2)
Lock Washer – M6 (6)
Bolt - M6 x 1.0, 16mm, Hex Head (2)
Flat Washer - M5, 12mm x 0.8mm (2)
Screw - M5 x 2.1, 32mm, Button Head, Phillips (2)
Nut - M8 x 1.25 (3)
Lock Nut - M6 x 1.0 (8)
Bolt - M8 x 1.25, 45mm, Hex Head (1)
Bolt - M5 X 0.8, 10mm, Button Head, Socket (6)
Flat Washer - M8, 17mm x 2mm (4)
Flat Washer - M6, 20mm x 1mm (8)
Lock Washer - M8 (2)
Bolt - M8 x 1.25, 60mm, Hex Head (1)
Bolt - M8 x 1.25, 80mm, Hex Head (1)
Knob – M6, Extension Leg Lock (2)
Hardware
YP
Q
R
Z
S
T
UK
L
M
N
O
V
W
BB
CC
DD
X
U.
V.
W.
X.
Y.
Z.
BB.
CC.
DD.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
•
•
•
Drill with 1/4”, 5/16”, and 7/64” Drill Bits
Wrenches - 10mm, 13mm, and 17mm
Allen wrenches - 3mm and 4mm
4
TSG-FDC OWNER’S MANUAL
Lock Nut - M6 x 1.0 (8)
Bolt - M8 x 1.25, 45mm, Hex Head (1)
Bolt - M5 X 0.8, 10mm, Button Head, Socket (6)
Flat Washer - M8, 17mm x 2mm (4)
Flat Washer - M6, 20mm x 1mm (8)
Lock Washer - M8 (2)
Bolt - M8 x 1.25, 60mm, Hex Head (1)
Bolt - M8 x 1.25, 80mm, Hex Head (1)
Knob – M6, Extension Leg Lock (2)
ASSEMBLY INSTRUCTIONS
Attaching the Upper Leg and Leg Support to the Dust Collection Mounting Bracket
PAGES:
4-19
1
2
3
Insert the Upper Leg [C] into the
Dust Collection Guard Mounting
Bracket [B] while ensuring that the
pair of holes in each piece align.
Secure C and B with hardware
described in Step 2.
Add a Flat Washer - M8, 17mm x
2mm [X] to the Bolt - M8 x 1.25,
60mm, Hex Head [BB].
Insert the bolt into the lower hole
of the Dust Collection Guard
Mounting Bracket [B] then add
another Flat Washer - M8, 17mm
x 2mm [X] onto the end of the bolt.
Next, stack on a Lock Washer - M8
[Z] and nally a Nut - M8 x 1.25 [T].
Using a 13mm wrench at both the
nut and bolt, tighten the nut to
secure the Upper Leg [C] into the
Dust Collection Guard Mounting
Bracket [B].
Slide the hollow end (the end
without the cap) of the Extension
Leg [A] into the Upper Leg [C]
B
X
C
B
Z
TX
BB
BB
C
CA
(Mounting Bracket)
5TSG-FDC OWNER’S MANUAL
Attaching the Dust Collection Guard Mounting Bracket to the Extension Table
1Place the at edge of the Dust
Collection Guard Mounting
Bracket [B] against the right edge
of the extension table on your saw.
Ensure the top of the bracket is
ush or just below ush with the top
of the extension table.
B
4
5
Adjust the overlap between the
Extension Leg [A] and the Upper
Leg [C] until the total length of the
assembly (top of the dust collection
guard mounting bracket to the end
of the extension leg) approximates
height of the extension table of your
saw from the oor.
Thread the two Knob – M6,
Extension Leg Lock [DD] into the
two nuts on the Upper Leg [C]. The
knobs need only be moderately
snug at this time.
Upon completion of the installation
of your TSG-FDC, tighten the
extension leg lock knobs evenly to
secure the extension leg.
The knobs should engage the
Extension Leg [A] and secure it
against further movement. This will
help prevent potential injury due
to unexpected movement of the
oating dust collection guard.
HEIGHT OF YOUR EXTENSION TABLE
CA
C
DD
Autres manuels pour TSG-FDC
1
Table des matières
Autres manuels SawStop Outils
