Sauder 419200 Manuel utilisateur
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-14
Français pg 15-17
Español pg 18-20
Lot # 371565 04/07/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
5-Shelf Bookcase
419200
Here's one for
the books.
Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-14
15-17
18-20
21-22
23
419200 www.sauder.com/servicesPage 2
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A RIGHT END (1)
B LEFT END (1)
C TOP/BOTTOM (2)
D SHELF (1)
E BACK (1)
F ADJUSTABLE SHELF (3)
G BASE (1)
H END MOLDING (2)
I TOP MOLDING (1)
J SHELF MOLDING (4)
419200www.sauder.com/services Page 3
A
B
C
D
E
F
G
H
I
J
C
J
J
J
H
D
F
F
Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
419200 www.sauder.com/servicesPage 4
SAFETY BRACKET - 1
1G TIE PLATE - 4
3G
BLACK 9/16" LARGE HEAD SCREW - 21
1S
ANGLE BRACKET - 6
5G
10F TWIST-LOCK®FASTENER - 12
METAL PIN - 12
1R
NAIL - 46
1N
16S BLACK 1-7/8" PAN HEAD SCREW - 1
RUBBER SLEEVE - 12
2R
Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
419200www.sauder.com/services Page 5
(12 used)
10F
Do not tighten the TWIST-LOCK® FASTENERS in this step.
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (10F) into the large holes in a TOP/BOTTOM (C)
and SHELF (D).
å Repeat this step for the other TOP/BOTTOM (C).
10F
D
C
Step 2
419200 www.sauder.com/servicesPage 6
C
C
å Fasten six ANGLE BRACKETS (5G) to the TOP/BOTTOMS (C).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the edges of the ANGLE BRACKETS are
even with the edges of the TOP/BOTTOMS.
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
Remember:
Righty tighty.
Lefty loosey.
5G
Step 3
419200www.sauder.com/services Page 7
å Slide the END MOLDINGS* (H) onto the notched edges of
the ENDS (A and B).
å *U.S. Patent No. 5,499,886
A
B
H
H
Slide the END MOLDING (H) onto the notched edge.
Notched edge
Step 4
419200 www.sauder.com/servicesPage 8
D
Surface with
TWIST-LOCK® FASTENERS
å Slide the SHELF MOLDING* (J) onto the notched edge of
the SHELF (D).
å *U.S. Patent No. 5,499,886
J
Notched edge
Slide the SHELF MOLDING (J) onto the notched edge.
These edges must be even.
Step 5
419200www.sauder.com/services Page 9
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
å Fasten the TOP/BOTTOMS (C) and SHELF (D) to the ENDS (A
and B). Tighten twelve TWIST-LOCK® FASTENERS.
How to use the SAUDER TWIST-LOCK®FASTENER
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
D
J
C
C
A
B
H
H
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
Edge with
ANGLE BRACKETS
Edge with
ANGLE BRACKETS
å Fasten the BASE (G) and TOP MOLDING (I) to the TOP/
BOTTOMS (C). Use six BLACK 9/16" LARGE HEAD
SCREWS (1S) through the ANGLE BRACKETS on the
TOP/BOTTOMS and into the BASE and TOP MOLDING.
Step 6
419200 www.sauder.com/servicesPage 10
Don't worry. It isn't
Rome. This can be built
in a day.
C
C
G
I
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
Unfinished edge
Unfinished edge
Table des matières
Autres manuels Sauder Meubles
