Saturn 2000 Manuel utilisateur
Saturn 2000
Mobile Power Station
AC 2000W Fast Charge Type-C PD 100W Power Multiple Devices
Instruction Manual
ART.55705
2
Introduction
Thank you for choosing our product. For safe and efficient use of this equipment, please keep
this User Manual properly and read it carefully before use. After unpacking, please check the
product carefully. Check the items against the Packing List. In case of any inconsistency,
please contact your local dealer.
The relevent design schemes and manufacturing technology used in this product are
protected by patents.
The contents are subject to change without notice.
3
1. Safety Tips and Precautions………………………………………….4
2. Product Introduction.…………………………………………………..5
2.1 Appearance.…………………………………………………………5
2.2 Technical Parameters……………………………………………..8
3. Instructions for Use…………………………………………………….9
3.1 Battery Level Checking…………………………………………...9
3.2 Charging Mode …..………………………………………………...9
3.3 Solar Controller……………………………………………………10
3.4 Lighting Function…………………………………………………12
3.5 USB/12V DC Output Port …….………………………………….12
3.6 AC Output…………………………….…………………………….12
3.7 Protection Status Indication…………………………………….13
4. Common Failures and Countermeasures ………………………..14
5. Maintenance,Storage and Scrapping……………………………...14
5.1 Maintenance ………………………………………………………14
5.2 Storage …………………………………………………………….14
5.3 Scrapping ………………………………………………………....14
6. After-sales Service .…………………………………………………..15
7. Packing List…………………………………………………………….15
8. Warranty Time.…………………………………………………..........15
9. Warranty Range.…………………………………………………........16
10. Disclaimer.…………………………………………………...............16
11. Precautions.………………………………………………….............16
12. Product Warranty.…………………………………………………....17
4
Note:
If the equipment needs maintenance and repair, we recommend users to contact the
nearest authorized unit of factory. If the user delivers the equipment to an unauthorized
service center for maintenance or repair, the user is no longer entitled to the manufacturer's
warranty service.
Safety Tips and Precautions
1.1 Install the grounding device correctly according to the application stan-
dard.
1.2 Please use the product in a clean and dry environment to ensure the
working position is safe.
1.3 There shall be no flammables or explosives in the working space.
1.4 Workers implanted with cardiac pacemaker shall consult the doctor be-
fore using the equipment.
1.5 The product shall not be dumped or used upside down.
1.6 The built-in battery of the equipment shall be used under the environ-
ment specified in this Manual.
1.7 Avoid violent vibration and collision since the equipment contains lithium
battery.
1.8 Do not store the equipment with other items. There shall be no heavy ob-
jects on top of it.
1.9 Do not disassemble the equipment by yourself in case of failure.
1.10 Keep away from high temperature objects such as fire sources.
1.11 Avoid rainwater from seeping into the equipment.
1.12 Do not cover the machine, do not affect the ventilation and heat dissipa-
tion when it is working.
5
SN.
P1
P2
P3
P4
P5
P6
P7
P8
P9
K1
K2
K3
Function
Connect the charger
Dual 5V 2.4A output
MAX 65W output
PD 100W output
DC 12V 10A output
DC 12V 10A output
AC 220V 2000W output
AC 220V 2000W output
On/Flashing/Off
Turn on/off the DC power
Turn on/off the light
Turn on/off the AC power/Long press
for five seconds to switch 50/60HZ
Name
Charging input port
USB output
USB QC output
USB Type-C port
12V Cigarette port
12V DC port
AC socket 1
AC socket 2
Lighting
DC button
LED button
AC button
Product Information
P7
P1
P5
P4
P3
P2
0520
OUTPU T
2000
INPUT
WATTS Hours WATTS
98 %
50Hz
60Hz
CAR
CAR 12V /10A
USB QC
USB-A U SB-A
TYPE- C
DC 12V/ 10A
P8
AC 1500W/3000W Peak
K1 P6 P9 K2 P9 K3
6
It is not displayed when the
machine is not connected to the
Internet, and displayed when the
device is connected to the Internet.
(Not available)
Rotating means the fan is on.
Used for engineering testing before
leaving the factory.
Display the current input power
level.
According to the power
consumption, the remaining
use/charging time is displayed, and
the battery lightning symbol lights
up to indicate how long it will take
to fully charge.
Indicates that the temperature of
the machine is too high, pay
attention to cooling down.
Indicates that the temperature of
the machine is too low, and it
should be moved to an environment
where the machine can work and
allowed to heat up naturally before
use.
Network connection
instructions
Cooling fan indication
Development mode
Input power
Remaining
charge/discharge time
High temperature
indication
Low temperature
indication
SN.
a
b
c
d
e
f
g
Icon Function Function
7
When this prompt appears, stop
using it immediately, follow the
instructions, or contact after-sales
service.
Display the current output power.
Display the remaining battery
power, 0~100%.
Indicate the remaining power, and
display the running light when
charging.
According to the use of the
machine, the combination shows
different states.
Displayed in combination with
different functional modules,
indicating the corresponding
module overload protection.
Car start function (not available)
UPS function (not available)
AC output, 50/60HZ
DC total output
DC 12V port output
USB-A port output
USB-C port output
Cigar lighter 12V output
Fault indication
Output power
Remaining battery
percentage
Battery level indicator
Atmosphere light
Overload indication
Function indication
h
i
j
k
l
m
n
8
Technical Parameters
Technical Specifications
Model
Battery Capacity
Battery Type
Wall Charging Time
Wall Charging Mode
Solar Charging Time
Solar Controller Mode
Charging Temperature Range
Life Cycles
USB Port
USB-QC Port
USB-Type-C Port
12V Cigarette Port
12V DC port
LED Light
Rated AC output
Peak AC output
Output Voltage
Output Frequency
Waveform
THD
Discharging Temperature Range
Weight
Dimension
Saturn 2000
1536Wh
LiFePO4
54V/10A About 3 hours
CC-CV
54V/7.5A MAX 3-4 hours
MPPT
0⁰C-45⁰C
2000 times
5V/2.4A * 2
Max 65W
PD 100W
12V/10A
12V/10A
2W * 2
2000W
4000W
220VAC ± 10%
50/60HZ
Pure sine wave
<3%
-10⁰C-60⁰C
21KG
394*223*320mm
9
Under the power off state, press the DC Button(K1) to observe the remaining battery
capacity through Battery percentage(j/k). It will shut down again if the Standby Button(K1)
is pressed again.
Please connect the charger correctly when the power of the device is low. The input power
(d) displays the charging power, the atmosphere light (l) displays cyclically, and the
remaining time (e) displays the remaining charging time.
After being fully charged, the battery percentage will display 100%, the atmosphere light (l)
will stop, and the LCD will turn off after 10 seconds and enter the standby mode.
Wall charger (54V 10A) takes about 3 hours to recharge.
Standard solar charger (54V 7.5A max) with 36V 400W solar panels takes 3-4 hours to
recharge depending on the solar conditions.
Recommend to solar panels above 100W, voltage 36V (16V-50V) with MC4 connector.
0520
OUTPU T
2000
INPUT
WATTS Hours WATTS
98 %
50Hz
60Hz
CAR
CAR 12V /10A
USB QC
USB-A U SB-A
TYPE- C
DC 12V/ 10A
AC 1500W/3000W Peak
10
Input
Output
Controller mode
MPPT efficiency
No load loss
Over voltage protection
Anti reverse connection protection
Working temperature
Weight
Size
3.3 Solar Controller
After the connection of the whole system is correct, if the sunlight is sufficient, the LED light
will flash several times and then the tube will light up, the controller will start to work, the
tube will display the system parameters in a cycle, and the LED light will indicate green
normally.
Status indication, as shown in the table below:
3.3.1 Controller Technical Specifications
3.3.2 Controller operation and status indication
Solar (solar indicator light)
Bat (output indicator)
( )
Fuse 15A
Battery (output line)
Charge Display
3.3.3 Output indication
16V〜50V/25A(MAX)
54V/7.5A(MAX)
MPPT
≥99%
< 5mA
58V±1.5V
-25℃ - 65℃
0.8Kg
L115×W111×H43(mm)
When the positive and negative poles of the battery
are connected reversely, the fuse will blow. The user
needs to replace the 15A, φ 5 × 20 glass tube fuse.
Show contents
The first digit of tube
Show contents
state
red
green
b
c
d
Status description
Solar panel access
Battery charging
Battery voltage
Solar panel input voltage
Solar panel charging current
Ce manuel convient aux modèles suivants
1
Table des matières
